首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 140 毫秒
1.
二阶动态滑模控制在移动机械臂输出跟踪中的应用   总被引:6,自引:3,他引:6  
针对移动机械臂的输出跟踪问题,结合高阶滑模控制和动态滑模控制的设计思想为其设计了一种二阶动态滑模控制器.首先给出了包括驱动电机动态特性的移动机械臂的简化动态模型,然后通过微分同胚和输入变换将其分解为四个低阶子系统,并给出了其输出跟踪的二阶动态滑模控制器的设计方法.仿真结果表明,所设计的二阶动态滑模控制器不仅能很好地跟踪给定轨迹,而且能有效地削弱滑模控制系统的抖振.  相似文献   

2.
针对非完整移动机械臂惯性参数的不确定性,采用滑模控制为其设计了输出跟踪控制器。首先给出了包括驱动电机动态特性的非完整移动机械臂的简化动态模型,然后通过微分同胚和输入变换将其分解为4个低阶子系统,并给出了其输出跟踪的滑模控制器设计方法。仿真实验表明,所设计的鲁棒控制器能很好地跟踪给定轨迹。  相似文献   

3.
潘海鹏  戴文战 《控制与决策》2004,19(11):1312-1314
针对一类存在参数不确定性的反馈线性的非线性动态系统,通过构造两个滑模流形,即误差跟踪的线性函数和中间控制变量与其实际值之间的误差,给出了输出跟踪控制律.并设计一个变结构控制律使闭环系统的轨迹渐近趋于滑模区,对于所有滑模区上的轨迹,跟踪误差趋于零.  相似文献   

4.
飞行器空速/高度的精确解耦跟踪,控制本质上是非最小相位输出精确解耦跟踪控制问题,由于存在内动态不稳定性,经典逆系统方法无法使用。将稳定逆办法与滑模控制相结合来解决存在的问题。首先针对稳定逆非因果性带来的问题,给出了一种稳定逆因果近似解的求法,经计算证明了近似结果误差的渐近收敛特性;然后利用稳定逆困果近似解将输出跟踪问题转化为不确定系统的鲁棒镇定问题,并对滑模控制和干扰观测器设计了相应的反馈镇定控制器。经过仿真表明综合稳定逆因果近似解和滑模控制的方案既发挥了逆系统方法的动态解耦能力,又利用了滑模控制的鲁棒性实现飞行器空速/高度精确解耦跟踪控制,也可以很好的兼顾控制器的鲁棒性和抗干扰性。  相似文献   

5.
张岳  韩召 《电子技术应用》2007,33(12):159-162
提出了基于滑模控制的全桥式电压型逆变器的控制方法,解决了逆变器的电流基准不易测量的问题,并且在负载突变情况下,输出电压表现出对扰动的不敏感性和较强的鲁棒性以及良好的动态特性。给出了该滑模控制全桥式电压型逆变器在无刷双馈电机串级调速中的应用。应用表明,基于滑模控制的全桥式电压型逆变器输出电压能够快速跟踪参考信号。  相似文献   

6.
电液负载模拟器的自适应滑模控制方法   总被引:1,自引:0,他引:1  
针对电液负载模拟器存在的系统非线性、不确定性和强干扰的控制难点,设计了自适应滑模控制方法.设计积分滑模以降低控制器对期望跟踪轨迹高阶导数的要求;设计动态滑模算法抑制抖振;采用小脑模型关节控制器(CMAC)在线学习系统不确定性以降低控制器参数设计的保守性.设计了自适应滑模控制律,给出了CMAC神经网络权值调整算法,证明了控制器的稳定性,以确保系统稳定且输出跟踪误差渐近收敛于零.仿真结果证明了控制策略的有效性.  相似文献   

7.
曲鑫  任章 《控制工程》2011,18(2):219-222,253
为了有效地消除被控系统中高度非线性,强耦合及参数不确定性对于控制系统所造成的影响,设计了Terminal滑模变结构动态逆控制方法.该方法通过引入一种增广滑模超平面,给出任意阶系统选择Terminal滑模面的具体数学表达式,并基于李雅普诺夫稳定性理论得出相应控制器,保证了输出跟踪误差能够在有限的时间内达到零,并且误差趋于...  相似文献   

8.
不确定动态系统的执行器故障检测与重构   总被引:2,自引:0,他引:2       下载免费PDF全文
讨论不确定动态系统的执行器故障检测与重构问题.以滑模观测器为基础,利用状态和输出变换方法与奇异值分解方法相结合对系统进行降阶,提出一种鲁棒故障重构观测器.给出了优化滑模策略,并作了严格论证,保证对系统不确定性具有鲁棒性和跟踪系统状态的收敛性.应用等价输出控制的概念和设计的鲁棒故障重构观测器,获取故障信息并实现执行器故障的检测与重构.最后通过数值仿真验证了该方法的有效性和可靠性.  相似文献   

9.

针对一类输入受限的不确定非仿射非线性系统跟踪控制问题, 提出一种二阶动态terminal 滑模控制策略. 在不损失模型精度, 并考虑系统输入饱和受限的前提下, 给出一种适用于全局的不确定非仿射非线性系统近似方法. 提出小波小脑模型干扰观测器设计方法, 实现复合扰动的有效逼近. 构造辅助系统分析输入饱和对跟踪误差的影响. 通过构造基于PI 滑模面的terminal 二阶滑模面, 给出二阶动态terminal 滑模控制器设计过程, 克服了传统滑模的抖振问题. 仿真结果验证了所提出方法的有效性.

  相似文献   

10.
给出了移动机器人鲁棒输出跟踪的高阶滑模控制器, 它不仅可以削弱滑模控制系统的抖振问题, 还对系统存在的不确定性具有良好的鲁棒性. 数值仿真表明了该控制器的有效性.  相似文献   

11.
In this work a neural indirect sliding mode control method for mobile robots is proposed. Due to the nonholonomic property and restricted mobility, the trajectory tracking of this system has been one of the research topics for the last ten years. The proposed control structure combines a feedback linearization model, based on a kinematics nominal model, and a practical design that combines an indirect neural adaptation technique with sliding mode control to compensate the dynamics of the robot. Using an online adaptation scheme, a neural sliding mode controller is used to approximate the equivalent control in the neighbourhood of the sliding manifold. A sliding control is appended to ensure that the neural sliding mode control can achieve a stable closed-loop system for the trajectory-tracking control of a mobile robot with unknown nonlinear dynamics. The proposed design simultaneously guarantees the stability of the adaptation of the neural nets and obtains suitable equivalent control when the parameters of the robot model are unknown in advance. The robust adaptive scheme is applied to a mobile robot and shown to be able to guarantee that the output tracking error will converge to zero.  相似文献   

12.
移动小车的轨迹跟踪控制   总被引:20,自引:3,他引:17  
对由运动学模型描述的二自由度移动小车的跟踪问题进行研究。利用终端滑动模态技术设计控制律,使得移动小车能在有限时间内完全跟踪转动速度不为零的期望轨迹。仿真结果表明了该方法的有效性。  相似文献   

13.
张金学  李媛媛 《电脑学习》2012,2(1):53-55,58
轮式机器人是一个典型的非完整性系统。由于非线性和非完整特性,很难为移动机器人系统的轨迹跟踪建立一个合适的模型。介绍了一种轮式机器人滑模轨迹跟踪控制方法。滑模控制是一个鲁棒的控制方法,能渐近的按一条所期望的轨迹稳定移动机器人。以之为基础,描述了轮式机器人的动力学模型并在二维坐标下建立了运动学方程,根据运动学方程设计滑模控制器,该控制器使得机器人的位置误差收敛到零。  相似文献   

14.
刘宜成  熊宇航  杨海鑫 《控制与决策》2022,37(11):2790-2798
针对具有典型非线性特性的多关节机器人轨迹跟踪控制问题,提出一种基于径向基函数(RBF)神经网络的固定时间滑模控制方法.首先,基于凯恩方法建立包括系统模型不确定性以及外部干扰在内的多关节机器人动力学模型;然后,根据机器人动力学模型设计一种固定时间收敛的滑模控制器,RBF神经网络用来逼近系统模型中的不确定性项,并利用Lyapunov理论证明该系统跟踪误差能在固定时间内收敛;最后,对特定型号的多关节机器人虚拟样机进行仿真分析,结果表明:与基于RBF神经网络的有限时间滑模控制器相比,所提出控制器具有良好的跟踪性能且能保证系统状态在固定时间内收敛.  相似文献   

15.
A dynamical discontinuous feedback strategy of the sliding mode type is presented for asymptotic output tracking problems in nonlinear dynamical systems. N. Fliess' (1989, 1990) generalized observability canonical form (GOCF) is used in the derivation of the dynamical variable structure feedback controller. For a large class of nonlinear systems, a truly effective smoothing of the sliding mode controlled responses is possible, while substantially reducing the chattering for the control output. For this reason, the technique is especially suitable for the control of some mechanical and electromechanical systems. An example, including simulations, is provided  相似文献   

16.
This paper presents a sliding mode control method for wheeled mobile robots. Because of the nonlinear and nonholonomic properties, it is difficult to establish an appropriate model of the mobile robot system for trajectory tracking. A robust control law which is called sliding mode control is proposed for asymptotically stabilizing the mobile robot to a desired trajectory. The posture of the mobile robot (including the position and heading direction) is presented and the kinematics equations are established in the two-dimensional coordinates. According to the kinematics equations, the controller is designed to find an acceptable control law so that the tracking error will approximate 0 as the time approaches infinity with an initial error. The RFID sensor space is used to estimate the real posture of the mobile robot. Simulation and experiment demonstrate the efficacy of the proposed system for robust tracking of mobile robots. Recommended by Sooyong Lee under the direction of Editor Jae-Bok Song. This work was supported by the Korea Science and Engineering (KOSEF) grant funded by the Korea government (MOST) (No. R01-2007-000-10171-0). Jun Ho Lee received the M.S degree in Mechanical Engineering from Pusan National University. His research interests include factory automation and sliding mode control. Cong Lin received the B.S. degree in Electrical Engineering from Jilin University and the M.S degree in Electrical Engineering from Pusan National University. His research interests include neural network and sliding mode control. Hoon Lim is currently a M.S student in Electrical Engineering of Pusan National University. His research interests include mobile manipulator and sliding mode control. Jang Myung Lee received the B.S. and M.S degrees in Electronics Engineering from Seoul National University, Korea. He received the Ph.D. degree in Computer from the University of Southern California, Los Angeles. Now, he is a Professor in Pusan National University. His research interests include integrated manufacturing systems and intelligent control.  相似文献   

17.
In this article, the robust trajectory tracking problem for the dynamical model of a wheeled mobile robot has been solved using sliding mode control. The presence of bounded uncertainties (parameter variations and input disturbances) has been considered. The control policy makes use of two nonlinear sliding surfaces, able to ensure the robust asymptotic vanishing of the three tracking errors. The control law has been tested by simulation. The reported results show the effectiveness of the proposed control law. © 2001 John Wiley & Sons, Inc.  相似文献   

18.
针对具有未知的滑动与打滑的轮式移动机器人(WMR),提出了一种基于自抗扰思想的跟踪控制策略.首先建立了滑动与打滑条件下的轮式移动机器人动力学模型.其次,由反步法设计运动学控制器,基于模型设计线性扩张观测器和动力学控制器,并给出了控制器稳定性分析.最后与积分滑模控制进行了仿真对比,结果表明该控制方法的误差收敛速度更快.观测器能够精确估计滑动与打滑及动力学不确定性对机器人的扰动,提高了轮式移动机器人轨迹跟踪的鲁棒性.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号