首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 125 毫秒
1.
单相电路的谐波和无功电流实时检测法   总被引:1,自引:0,他引:1  
本文在瞬时无功功率理论的基础上,对单相电路的电流进行分解,提出了一种基于有功电流分离的单相电路谐波及无功电流检测方法.采用电流平均值滤波器来代替传统的低通滤波器提取直流分量,较好地解决了单相电路中谐波与无功电流的实时检测问题,电路结构简单、动态响应速度快、检测精度高,易于实现.实验结果验证了该方法的有效性.  相似文献   

2.
如今,电网谐波污染日益严重,如何进行谐波的抑制已经成为现代电力研究中的一个重要课题,有源滤波器是谐波抑制的主要方法之一。准确、快速地检测出电网电流中的谐波成分是谐波抑制和无功补偿的关键。提出了一种基于瞬时无功功率理论改进的谐波电流检测方法,该方法能在电网不平衡状态下只检测出谐波电流,而不会将基波负序电流和谐波电流同时提出,也能适用于电网平衡时的谐波电流检测。运用MATLAB仿真软件表明:该方法是正确的和有效的,且检测精度高,动态响应快。  相似文献   

3.
杨菊 《测控技术》2013,32(5):125-129
针对飞机三相四线制电源系统的特点及现有电能质量控制方法的不足,提出了一种基于自适应陷波器、瞬时对称分量算法及滞环电流控制方式的飞机交流电源的有源滤波器。所提方法能够有效地消除飞机交流电源电流中的谐波及中线电流,补偿无功以及平衡三相电流。理论推导和仿真结果表明,该方法能够准确快速地检测出飞机三相四线制电源系统中的谐波电流,具有较好的动静态性能。  相似文献   

4.
杨雪翠  许军 《工矿自动化》2005,(Z1):187-189
将自适应噪声对消技术用于谐波和无功电流检测提出了一种变学习因子的神经网络自适应谐波和无功电流检测方法.所提出的方法适用于有源电力滤波器的谐波和无功电流检测.理论分析和仿真结果证实了该方法的可行性.  相似文献   

5.
有源电力滤波器(APF,Active Power Filter)是当今重要的谐波治理和无功补偿装置,APF关键的环节是实时准确地检测出谐波电流.针对传统基于瞬时无功理论的ip-iq谐波检测方法实时性差、对系统的补偿能力要求很高等不足,提出了基于BP神经网络与锁相环相结合提取特定次谐波的方案,权值调整采用BFGS拟牛顿算法,该算法可检测出基波、各次谐波分量的幅值和相角,且神经网络的并行运算能力强大,方便应用于三相电路中.改进的特定次谐波检测系统较传统的LC滤波器和并联型APF的组合调节策略响应速度高,系统结构简单,且不易出现高频谐波.通过Matlab仿真实验证明了该算法的可行性和良好的控制效果.  相似文献   

6.
基于MATLAB的谐波电流检测方法的建模与仿真   总被引:6,自引:0,他引:6  
以三相电路瞬时无功理论为基础,计算p、q或者ip、iq为出发点即可得出三相电路谐波和无功电流检测的两种方法,分别为p.q运算方式和ip、iq运算方式。MATLAB/SIMULINK提供的SimPower工具箱基本涵盖了电力系统建模和仿真的各个方面。该文利用SimPower工具箱对谐波电流检测两种方案进行了建模和仿真。使用该方法能够将谐波电流检测的工作过程及有关波形准确直观地显示出来,验证了理论分析的正确性。  相似文献   

7.
基于Park变换的改进谐波分析算法   总被引:1,自引:1,他引:0  
基于同步旋转坐标系理论,介绍一种改进的Park变换方法来检算谐波电流.该方法不受电网电压畸变影响,理论上可以检测任意次谐波的正序、负序、以及基波电流的有功和无功分量,从而实现对负载电流成分的完全分解.应用此方法仿真,对已知谐波分量的数据进行分析,并以有源滤波器在典型应用环境--二极管整流电路负载情况下进行系统仿真.仿真结果与理论分析相符,表明了该方法的可行性.  相似文献   

8.
提出了一种基于小波包变换的电力谐波检测方法。该方法采用小波包变换对电流信号进行分解,即将该电流信号分解成低频部分与高频部分,然后分别对低频部分及高频部分进行小波包分解,重构后得到该电流信号的基波分量,从原始电流信号中减去基波分量,从而得到该电流信号的谐波分量。仿真结果表明,该方法能够很好地检测出电流信号中的谐波分量,并且能对指定频率的谐波进行检测。  相似文献   

9.
分析了有源滤波器(APF)基于旋转坐标系下进行坐标变换的谐波检测方法。该方法在电网电压畸变情况下能很好地检测和补偿电网中的谐波电流和无功电流。应用于三相三线制电路时,该方法可以计算任意次谐波电流的瞬时值。仿真与实验均验证了所提出的谐波检测方法的有效性,基于旋转坐标系下进行坐标变换的谐波检测方法的有源电力滤波器具有良好的工作性能。  相似文献   

10.
针时电力牵引负荷的谐波和无功治理是谐波抑制和无功补偿领域的一个重要课题,本文深入分析了瞬时无功功率理论的原理,提出了基于瞬时无功功率理论的单相电路无功电流检测方法,并与基于有功电流分离法的单相电路无功电流检测方法进行了比较,通过EMTDC/PSCAD软件仿真结果表明,前者的无功电流几乎没有突变发生,验证了该方法的有效性.  相似文献   

11.
传统的基于瞬时无功功率的谐波检测方法只能检测谐波总量,且存在动静态特性难以兼顾的弱点,为了克服这些缺点,提出了一种基于瞬时无功功率理论的改进谐波电流检测方法,该方法在谐波检测电路中加入倍频器实现任意次谐波的检测,并采用改进的变步长自适应滤波器作为谐波检测电路中的低通滤波器,提高了谐波检测的动态响应速度和谐波电流的检测精度。仿真实验证实了该方法的正确性和有效性。  相似文献   

12.
对并联型有源滤波器的谐波和无功电流检测方法进行了讨论,对目前常用的基于瞬时无功理论畸变电流检测算法的p-q法,ip-iq法进行了理论分析与仿真验证,对比了两种检测算法,仿真结果表明,p-q法,ip-iq法均可以有效检测出谐波,但是ip-iq法要优于p-q法。  相似文献   

13.
高峰  林辉 《测控技术》2013,32(6):142-147
针对飞机交流变频电网谐波抑制的需要及传统方法在变频条件下的不足,提出了一种基于正序基波滤波器的补偿电流指令产生方法。该方法从整体上分析了正序基波滤波器的特性,并利用正序基波滤波器分别滤除了电源电压和电流中的谐波和非正序成分,而后计算出电源的正序基波有功电流,由此得到补偿电流指令,检测过程中省去了低通滤波器。将该方法应用于三相电压不对称且有畸变的飞机变频电网的并联有源电力滤波器(APF)中,结果表明,采用该方法在整个基频变化范围内能实现对谐波、无功及不平衡电流准确而快速的检测和补偿,补偿结果符合MIL STD 704F和IEEE Std 519标准的要求。  相似文献   

14.
孙百军  施宏  邹晓渔 《测控技术》2017,36(8):145-149
提高航空交流电网供电品质,对于确保飞机安全具有重要意义.有源电力滤波器(APF)因其谐波补偿动态性能好,成为治理谐波污染的一种有效装置.分析了串联式有源电力滤波器(SAPF)谐波补偿的基本原理,着重介绍了基于瞬时无功功率理论的谐波电压检测方法.在Matlab/Simulik环境下,基于瞬时无功功率理论的ip-iq谐波检测方法,采用直流电压、补偿电流的双闭环控制结构,建立了SAPF系统仿真模型,包括三相400 Hz飞机电源、非线性电压负载、谐波检测以及补偿跟踪电路等模型.实验结果表明SAPF实现了对负载谐波的显著抑制,证明了SAPF应用于航空电网谐波治理是可行的.  相似文献   

15.
脉冲涡流检测技术作为当前无损检测技术中的一种新技术,能够快速方便地检测金属构件中的缺陷;文中根据脉冲涡流检测信号源的特点,采用Direct Digital Frequency Synthesis(直接数字频率合成,简称DDS)技术,设计了一种参数可调式脉冲波形信号源的脉冲涡流检测系统;系统由脉冲涡流检测硬件电路、上位机、数据采集卡和相关软件组成;最后使用AD9850芯片产生1kHz、50%占空比的方波激励对标准缺陷试件进行实验,并提取特征值对试件的三种定量缺陷区分进行了研究。  相似文献   

16.
In this paper, a hybrid filter topology is proposed to reduce torque pulsation, switching voltage harmonics and EMI noises in PMSM with direct torque hysteresis controllers. The filter topology consists of IGBT-based active filter (AF), LC filter in the main inverter output and trap filter in the motor side. The coupling of the AF-compensated voltage and the motor main voltage is achieved through series transformer. The AF is characterized by detecting the harmonics in the motor phase voltages and uses hysteresis voltage control method to provide almost sinusoidal voltage to the motor windings. The active filter uses hysteresis voltage controller while the motor main circuit uses hysteresis direct torque control. The simulation results of this combined control structure show considerable torque ripple or pulsation reduction in steady state range and adequate dynamic torque performance as well as considerable harmonics and EMI noise reduction.  相似文献   

17.
Modular multilevel inverters are promising candidates for next generation of efficient, robust and reliable inverters in large scale photovoltaic system. A modular cascaded multilevel inverter based shunt hybrid active power filter (SHAPF) for three phase grid-connected large scale PV systems is represented in this paper. The main contribution of this paper is to model and control of grid interfaced large scale photovoltaic system with embedded hybrid active power filter functions. In proposed system, the features of hybrid active power filter have been amalgamated in the control circuit of the voltage controlled voltage source inverter interfacing the photovoltaic system to the grid. As a result, the same inverter part of SHAPF is utilized to inject power generated from photovoltaic source to the grid and also to act as hybrid active power filter to compensate harmonics and reactive power demand. With using compensation ability, the grid currents are sinusoidal and in phase with grid voltages. The whole system is modeled in PSCAD/EMTDC. The simulation results are demonstrated to verify the operation and the control system of the proposed system.  相似文献   

18.
针对电网电压不平衡造成的双馈风力发电机(DFIG)定子有功和无功功率振荡、电磁转矩脉动、定、转子电流不平衡等问题,提出了一种双馈风力发电系统转子侧变换器强励控制方案。推导了不平衡电网电压下DFIG定子有功、无功功率的二次谐波分量在同步旋转坐标系中的表达式,并以此为依据设计了电压强励补偿环。分析了有功、无功功率,电磁转矩及定、转子电流二次谐波分量之间的关系,采用单一强励补偿控制器对不同控制目标进行切换强励控制。对1.5MWDFIG系统的控制特性研究验证了所提控制策略的可行性和优越性。  相似文献   

19.
Mostly the power quality issues in the distribution line system happen due to the presence of harmonics. Especially, the nonlinear loads such as power electronic converters, high-speed semi-conducting switches, and solid state drives were the major causes for harmonics in distorted power system signals. Moreover, the estimation of magnitude and the phase of this harmful harmonic interference are necessary. By taking in to consideration of all the above factors, this paper develops an efficient technique for harmonic estimation and detection of the renewable wind energy resources and elimination of these harmonics will also be done accordingly for getting desired output from wind energy. 8 bit inputs (4 + 4) are collected and used to generate the intended input set for ANN training. The proposed work develops an Adaptive Linear Neural Network (ADALINE) for the estimation of harmonics which is the novelty of this work. For making the harmonics content more negligible and to enhance the load power quality, an Active Power Filter (APF) is used. The novel control design is developed with a Pulse Width Modulation (PWM) control. In addition, feed forward networks (trained by back propagation algorithm) works like a hysteresis band comparator. An APF control design is developed with ADALINE network in which the load and current along with voltage will be analyzed and then the controller will be calculating the control signal by considering the reference compensation current. Afterwards, the power system is injected with compensating current. The simulation is carried out with Matlab-Simulink laboratory prototype is developed with Xilinux 3E Spartan FPGA board to verify the proposed control designs. The proposed work is compared with exiting method comprising Shunt Active Power Filters (SAPF) with ADALINE for the performance perspectives. This method was found to be effective in terms of many parameters such as load voltage, load current, voltage, reactive power, real power and especially THD value than those of the existing works which are considered.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号