首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 125 毫秒
1.
SISOTOOL在自动控制系统校正中的应用   总被引:1,自引:0,他引:1  
本文介绍了SISO系统图形交互式设计工具SISOTOOL,并以小功率角度跟踪位置随动系统为例,用简洁、直观的方式设计出校正装置,给出仿真曲线和相应的时域、频域性能指标,对自动控制系统的设计有一定的参考意义。  相似文献   

2.
针对EAST(Experiment Advanced Superconductive Tokomsk)托卡马克装置中多个子系统采用PID控制,本文介绍一种以根轨迹法为理论基础,利用MATLAB控制系统工具箱中的GUI工具SISOTOOL调整根轨迹的形状,同时通过实时观察典型输入响应的波形得到符合要求的控制参数.该方法直观,适用于线性、非线性系统,可根据不同的系统指标整定出不同的PID参数.  相似文献   

3.
本文详细介绍了图形交互式SISDO设计工具,并以实例论述了该GUI工具的使用方法,特点和效果,实践表明,SISO设计工具使得控制系统的设计变得简便,更直观,具有广阔的应用前景。  相似文献   

4.
一种可视化OA工作流设计工具   总被引:2,自引:0,他引:2  
介绍了一种可视化的OA工作流设计工具,该工具可以配合Domino/Notes使用,用户不需要编程就可以定义设计出满足要求的收发文流程,实际使用效果良好。  相似文献   

5.
本文简单介绍了UG软件二次开发的工具及其使用方法,帮助学习UG软件开发的人员尽快掌握这些工具的使用,提高设计效率。  相似文献   

6.
为了嵌入式系统的软件开发,基于嵌入式处理器的解决方案必须得到一套完整的软件设计工具包的充分支持。从软件工具支持角度看,完成SoPC设计需要多种工具,包括传统的硬件设计工具、嵌入式软件设计工具、新的系统级设计工具、建模支持工具和调试工具。硬件/软件的交互验证以及其它的ASIC验证技术也是SoPC设计人员需要掌握的重要技术,使用它们能够充分实现SoPC的优点。  相似文献   

7.
Altera公司为NiosII系统开发人员提供新的NiosII C语言至硬件加速(C2H)编译器效能工具,该工具能够有效的提高嵌入式软件的性能。由于越来越多的嵌入式设计使用了FPGA,因此,NiosII C2H编译器的目的是帮助嵌入式系统开发人员提高效率,实现成功的设计。作为NiosII C2H编译器的一部分,Ahera还允许第三方工具供应商使用其系统级基本结构,包括QuartusII SOPC Builder工具,以促进多种电子系统级(ESL)设计工具的开发。  相似文献   

8.
本文介绍一种用户接口自动生成工具的设计原理及实现方法,使用这种工具,可以自动生成适合用户需要的接口程序。  相似文献   

9.
鉴于许多数据库系统因结构各异导致数据不能共享的情况,作者设计了一个基于异构数据库的信息访问工具。本文介绍了该工具的功能组成,并简要介绍了在设计中使用的关键技术。  相似文献   

10.
Altera公司宣布,Freescale将为SOPC Builder工具推出32位 V1 Coldffire软核。为讯速方便地使用Altera Cyclone Ⅲ FPGA建立系统级设计,设计人员现在使用SOPC Builder工具时,可以选择Freescale、ARM或者Altera软核处理器以及50多种其他的知识产权(IP)模块。  相似文献   

11.
提出一个无跳刀的轮廓平移刀路轨迹优化算法.根据刀路环之间父环和子环关系,提出“刀路环树”的概念,将加工刀路的一次环切定义为一个“刀路环向量”,并将刀路环的各个属性定义为刀路环向量的分量.根据无跳刀轨迹的要求,针对刀路环树的各个刀路环向量进行遍历,以获得了一个无跳刀的轮廓平移刀路轨迹算法,并通过与其他算法比较,证明该算法无跳刀、无重复切削,并且可以自动执行.  相似文献   

12.
13.
A corner-looping based tool path for pocket milling   总被引:1,自引:0,他引:1  
In milling around corners, cutting resistance rises momentarily due to an increase of cutter contact length. NC tool path generation in dealing with sharp corners thus requires special consideration. This paper describes an improved NC tool path pattern for pocket milling. The basic pattern of the improved tool path is a conventional contour-parallel tool path. Bow-like tool path segments are appended to the basic tool path at the corner positions. When reaching a corner, the cutter loops around the appended tool path segments so that corner material is removed progressively in several passes. By using the corner-looping based tool path, cutter contact length can be controlled by adjusting the number of appended tool path loops. The procedures of creating the improved tool path for different corner shapes are explained. The proposed tool path generation was implemented as an add-on user function in a CAD/CAM system. Cutting tests were conducted to demonstrate and verify the significance of the proposed method.  相似文献   

14.
针对复杂型腔数控加工的刀具组合优选问题,提出了一种基于遗传算法的复杂型腔类零件刀具优化方法.首先通过偏置环算法构建可行的型腔加工刀具集;其次为解决型腔类零件每个特征与整体最优刀具组合的差异性问题,建立以加工效率和刀具成本为优化目标的复杂型腔零件刀具组合优化模型,并通过有向图和改进的遗传算法对多刀具组合优化模型进行求解;最终,以某复杂型腔零件数控加工刀具组合优选为例进行实验,验证了方法的可行性.  相似文献   

15.
Recently, there has been a growth of interest in high-precision machining in multi-axis feed drive systems, which are subject to problems such as friction, cutting force and incompatibility of individual driving axis dynamics. Tracking errors in an individual driving axis during five-axis machining result in tool tip contour error and tool orientation contour error. Based on the conventional definition of the tool orientation contour error, that is, it is the deviation in the normal direction from the desired orientation in spherical coordinates, even if the tool tip and tool orientation contour errors are very small, a mismatch between the tool tip position and tool orientation causes an overcut or undercut when these errors are treated independently. To address this problem of mismatch, this paper presents a new definition of the actual tool orientation contour error. This definition considers synchronization between the tool tip and tool orientation contour errors. In addition, we propose an estimation model for the tool orientation contour error. Experimental results demonstrate that the proposed model provides a better indication of the actual tool orientation contour error than the conventional definition.  相似文献   

16.
Milling using a sequence of tools has become very attractive with the advent of rapid tool change mechanisms in modern CNC machines. However, the commercial CAM systems used to generate G&M code rely on experienced process planners to select a good tool sequence. When a tool sequence is selected and tool paths are generated, NC-verify systems are used to check the tool paths for tool holder collisions. If tool holder collisions are detected, the part has to be re-planned ab-initio. In this paper, we describe a method to select an optimal tool sequence by formulating the problem under certain assumptions as the shortest path solution to a single source directed acyclic graph. Also described is a method to incorporate tool holder solution in the context of selecting an optimal tool sequence. Examples have been worked out to illustrate the workings of the algorithm. Received: February 2005 / Accepted: September 2005  相似文献   

17.
Tool chains have grown from ad-hoc solutions to complex software systems, which often have a service-oriented architecture. With service-oriented tool integration, development tools are made available as services, which can be orchestrated to form tool chains. Due to the increasing sophistication and size of tool chains, there is a need for a systematic development approach for service-oriented tool chains. We propose a domain-specific modeling language (DSML) that allows us to describe the tool chain on an appropriate level of abstraction. We present how this language supports three activities when developing service-oriented tool chains: communication, design and realization. A generative approach supports the realization of the tool chain using the service component architecture. We present experiences from an industrial case study, which applies the DSML to support the creation of a service-oriented tool chain. We evaluate the approach both qualitatively and quantitatively by comparing it with a traditional development approach.  相似文献   

18.
Collaborative virtual prototyping of product assemblies over the Internet   总被引:1,自引:0,他引:1  
Product assembly design is a complex activity involving collaboration between several designers. Currently, many manufacturing firms out source the design and development of different portions of a product to different suppliers. Due to the absence of an integrated tool for collaborative product assembly design, designers currently follow an indirect approach. This makes collaboration an unorganized and inefficient activity. This paper discusses the architectural novelties and design considerations utilized to develop an integrated collaborative assembly design tool. Further, the scenarios of using such a tool are discussed in detail. This discussion highlights how the tool contributes towards making collaboration an organized and efficient activity and enables designers to rapidly design and prototype the product assembly.  相似文献   

19.
This paper analyzes the use of computer graphics images as an architectural assessment tool. The characteristics of such images as an architectural simulation tool are discussed and their reliability as an assessment tool is evaluated and compared with that of traditional hand-generated perspective drawings. A specimen application, architectural simulation of a city renewal plan, is presented.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号