首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
通过对ASIPP微束装置计算机控制系统的研究,该文着重探讨了利用ActiveX控件MSComm来实现计算机与MC2000之间通信过程中的一些关键问题及策略。  相似文献   

2.
胡智文  陈连运  余增亮 《计算机工程》2004,30(13):21-22,156
荷电单粒子微束装置是一种将粒子束斑的直径限制在微米量级范围内,并将预定数目的离子注入细胞中某一特定位置的一种辐射装置。定量辐射的精确度和定位辐射的准确性是微束装置的两个核心技术指标。对整个微束系统的关键部件实现计算机控制是实现“定点辐射”和“定量辐射”的前提和保障。文章主要介绍了ASIPP微束装置计算机控制系统的系统设计方案。  相似文献   

3.
该文研究了微束系统中的细胞图像处理问题。着重从微束装置的实际情况出发,对不同于一般图像处理的微图像处理进行了介绍,详细讨论了整个图像处理的过程,并探讨了微图像处理在整个微束计算机控制系统中的重要作用。  相似文献   

4.
基于MatrixVB的遍历细胞最优化路径方案   总被引:4,自引:0,他引:4  
主要介绍了ASIPP微束装置在细胞辐射过程中遍历细胞最优化路径方案,以及如何以细胞数据采集和图像处理模块采集并处理过的细胞图像中的细胞为对象,在VB应用程序中利用MatrixVB来实现遍历细胞敏感点最优化方案。  相似文献   

5.
作为辐射生物学发展的前沿,微束已经成为当今世界上用来研究低剂量辐射生物效应的一个强有力手段.单离子微束装置是一种将离子束斑的直径限制在微米量级范围内,并能将预定数目的离子精确注入到细胞中某一指定位置的辐射装置.结合一套自行开发的控制程序,CAS-LIBB微束装置的计算机控制系统可以实施对生物样品的精确定量和定点辐射.本文首先给出了装置定量和定点辐射的精度测定结果,该精度完全能够胜任细胞-亚细胞尺度的精确辐射.接下来详细探讨了控制系统的改进工作,最后对控制系统进行了展望.  相似文献   

6.
管慧 《微处理机》1992,(3):43-47
传感器作为微计算机控制系统的输入接口设备之一,已成为计算机检测与控制系统中不可缺少的摄取信息的功能器件。本文着重介绍了传感器输出信号的计算机处理和传感器作为输入接口在微计算机控制系统中的应用技术。  相似文献   

7.
样品架的计算机控制   总被引:3,自引:3,他引:0  
在荷电单粒子微束技术中,能够对细胞进行“定点”辐射是这一技术最为显著的特点。要确保这一特点得以实现,必须精确的控制微束装置中样品架的移动。本文中通过对计算机串行端口编程,与连接在串口上的样品架控制器MultiControl2000进行串行通信,成功地解决了微束系统中细胞在离子束线出口上方的精确定位问题,使定位精度高达到0.025μm,实现了定点辐射。  相似文献   

8.
在CAS-LIBB微束装置的图像处理过程中,经常遇到一幅图像中多个样品相互重叠的情况,给样品图像识别带来了不少麻烦.本文首先对CAS-LIBB微束装置和装置的图像处理模块做了简单介绍,接下来详细探讨了采用分水岭算法解决样品图像重叠的问题.最后通过实例验证了分水岭算法在解决图像重叠中的可行性.  相似文献   

9.
作为高层建筑垂直运输工具的电梯,随着目前高层建筑的发展,对其功能及可靠性的要求也与日俱增,使研究单台电梯的微计算机控制系统具有重要价值。本文讨论了以 Intel 8080为 MPU 的微电脑控制装置,实现单台直流电梯的自动控制。  相似文献   

10.
变频器作为一种高效节能的调速装置,正得到越来越广泛的应用。本文提出一种计算机控制变频器系统。该系统可使计算机控制多台变频器,构成连续生产线中的多台电动机调速系统。本文详细介绍了系统的硬件构成、计算机与变频器之间的通讯原理和通讯命令、以及系统的软件实现  相似文献   

11.
 The paper questions the ability of current university systems to respond appropriately to the complex demands of an Information Economy. It argues that new relationships between creative subjects and technology require new thinking about the nature and purpose of universities per se. In particular, attention is drawn to the growing involvement of the private sector in higher education. It is argued that it may not be appropriate to think of the `university of the future' in terms of current public sector and quasi public sector institutions, but rather in terms of an emporium, based on an international trade in educational services, and with the `University' as we now understand it occupying the functions of licensing, quality assurance and cultural custodianship. Accepted: 25 June 2002  相似文献   

12.
刘伟 《微计算机信息》2006,22(16):212-213
本文对于金属切削这一生产过程中所出现的不稳定问题,利用频率特性法中的奈氏判据,对其进行分析,从而找出消除自激振荡和达到切削过程绝对稳定的条件  相似文献   

13.
为了提升变压器绕组变形判别精度,研究了表征绕组特征的参数与绕组变形关系的仿真方法。利用有限元方法建立表征绕组特征的参数与绕组变形关系的双绕组、同芯式变压器漏磁场模型,通过二维泊松方程混合边值的有限元解分析变压器绕组漏磁场,利用最小二乘算法基于所建立变压器漏磁场模型辨识可表征绕组特征的漏电感参数,通过所获取漏电感值与实际漏电感值相比实现变压器绕组变形判别。通过有限元方法建立变压器绕组仿真模型并分析表征绕组特征的参数与绕组变形关系,仿真结果可知,该方法可有效辨识表征绕组特征的漏电感参数,依据表征绕组特征参数与绕组变形关系实现变压器高压与低压绕组变形的精准判别,判别精度高达99%以上,实验效果表明利用表征绕组特征的漏电感参数在线监测绕组变形具有可行性。  相似文献   

14.
每一种媒体都有自身的长处,对某种特定的教学和学习有效。同样,每种媒体又不可避免地存在局限性,不利于某些教学和学习。因此,多媒体不是一种全能的媒体,也不可能代替传统媒体。现代媒体与传统媒体在教学中应相互补充,取长补短,相得益彰。  相似文献   

15.
All titanium alloys are highly reactive in the molten condition and so are usually melted in a water-cooled copper crucible to avoid contamination using processes such as Induction Skull Melting (ISM). These provide only limited superheat which, coupled with the surface turbulence inherent in most conventional mould filling processes, results in entrainment defects such as bubbles in the castings. To overcome these problems, a novel tilt-casting process has been developed in which the mould is attached directly to the ISM crucible holding the melt and the two are then rotated together to achieve a tranquil transfer of the metal into the mould. From the modelling point of view, this process involves complex three-phase flow, heat transfer and solidification. In this paper, the development of a numerical model of the tilt-casting process is presented featuring several novel algorithm developments introduced into a general CFD package (PHYSICA) to model the complex dynamic interaction of the liquid metal and melting atmosphere. These developments relate to the front tracking and heat transfer representations and to a casting-specific adaptation of the turbulence model to account for an advancing solid front. Calculations have been performed for a 0.4 m long turbine blade cast in a titanium aluminide alloy using different mould designs. It is shown that the feeder/basin configuration has a crucial influence on the casting quality. The computational results are validated against actual castings and are used to support an experimental programme. Although fluid flow and heat transfer are inseparable in a casting, the emphasis in this paper will be on the fluid dynamics of mould filling and its influence on cast quality rather than heat transfer and solidification which has been reported elsewhere.  相似文献   

16.
归纳总结了计算机用户在日常工作、生活中可能碰到的多种代表性的电脑软硬件故障和问题及解决方法。各种故障问题类型和故障排除思维习惯来编排,具体包括开关机故障、死机故障、显示故障、声音故障、存储设备故障、CPU故障、内存故障、主板故障。在碰到电脑故障时,能快速判断和解决一些有规律可循的常见故障,以及如何维护电脑、如何避免电脑故障。  相似文献   

17.
人体测量学并不是现代社会的产物。有着很长发展历史的人体比例理论中就包含了现代人体测量学的基本内容,尽管其还不够系统完整,但至少说明了在艺术创作中诞生的人体比例理论对现代人体测量学的影响。并随着时间的推移而不断的完善发展,为现代人体测量学的系统提出奠定了坚实的基础。  相似文献   

18.
虚拟化技术是当今服务器技术的一个主流方向,也是一项在计算机领域具有革命性意义的技术.作为x86架构体系下虚拟化技术的领军者-VMware,在技术上有其独到之处.研究VMware的技术与应用,对探知其优秀的技术特点,了解其成熟的产品体系有着现实意义.  相似文献   

19.
Even though using the hand as a hammer causes injury, the practice continues, and may be increasing, in industry and in jobs that require intensive manual labor. This was an exploratory study aimed at measuring the relationships between the forces of strikes, the relative angles of strikes, and/or the number of strikes (up to 3) with the perception of severity of strikes when using the base of the palm of the hand. Eight subjects struck a metal force plate with the base of the palm of the hand at three levels of force, three levels of angle with respect to the surface of a force plate, and with three different numbers of times in a trial. Subjects were then asked to give a psychophysical rating after each trial. The subjective perception of the severity of each impact and force-time curves were recorded. From each force-time curve, peak force, maximum acceleration of force application, and the area of the force curve from initiation to peak were determined. Sixteen ANOVA models were analyzed.  相似文献   

20.
科学技术的发展,使得消费者和制造商对产品满足人的心理需求方面提出了更高的要求。情感化的设计只是一种创意工具,表达和发挥设计师的思想和设计目的,随着时代的发展,这种创意工具将变得日益锐利。然而让人们带着情感接受产品,接受设计者的思想,本文从全新的角度将产品的使用功能、产品造型、材料、色彩等方面,对产品中的情感化和趣味性元素进行分析和比较,说明情感化设计在当前具有广阔的发展空间。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号