Bistatic scattering centres of cone-shaped targets and target length estimation

The bistatic scattering centres are commonly modeled as the fixed scattering centres for imaging;however,the location of the bistatic scattering centre changes with the bistatic geometry in some real scenes.This paper focuses on the bistatic scattering centres of cone-shaped targets and considers how to utilize the length of the bistatic high-resolution range profile(HRRP) for target identification.Firstly,the locations of the bistatic scattering centres on the edge of a cone-shaped target are deduced with the method of equivalent currents,which are the intersection points of the edge and the plane constructed by the symmetry axis and the bisector of the bistatic angle.Then,based on the above conclusion,the wideband echo model and bistatic HRRP of a cone-shaped target is deduced.Then,the relation between the length of the bistatic HRRP and target length is deduced,which is useful for target identification.Finally,the bistatic HRRPs of cone-shaped targets are calculated via the Feko software and the calculated results validate the theoretical analysis.This research provides an exact mathematics model for the echo simulation,imaging,feature extraction and identification of cone-shaped targets in the bistatic radar.     

Estimation of Light Commercial Vehicles Dynamics by Results of Road Tests and Simulation

The chassis of LCV could be used for creating a wide range of vehicles modifications with the similar base （chassis）, but really different performance in wide range of maneuvers. The differences could be explained by a variety of design parameters. It means that the design of LCV modifications needs some effective approach that will provide an engineer by necessary data that could help to estimate the performance of new vehicles in particular active safety characteristics. This paper presents the combination of experiment and simulation methods that could be used for estimation of LCV active safety characteristics （first of all cornering stability）. The experimental method of estimation of cornering stability is shown, that is based on regulations of the Russian Standard GOST R 31507-2012 that presupposes different types of testing： static rollover and dynamic maneuvering on a road （line changing and running into the corner）. The multi-body simulation method with using MSC. ADAMS/CAR software was also used in a study. The approval of developed LCV multi-body model was made on a basis of good correlation between simulation results and experimental data. The relationship between LCVs design parameters （axle load distribution, height of the center of gravity, vertical and angular suspension stiffiaess） and active safety characteristics are received.     

Ganglion-Based Balance Design of Multi-Layer Model and Its War chfulness-Keeping

An important problem of machine vision is the balance among the efficiency, accuracy and computation cost.The visual system of man can keep watchfulness to the perimeter of a visual field and subtly process information emerging in the center of the visual field at the same time. This kind of requirement assignment of computation can virtually ease the demand of hardware both in quantity and complexity. Therefore designing an artificial model based on biological mechanism is an effective approach. In this paper a multi-layer neural model is designed based on the multi-scale receptive fields of ganglions in retina. The model can keep watch on the periphery part of a scene while processing the center information of the scene. And why it can balance the hardware complexity, processing precision and computational intensity is analyzed.An experiment is done to test the model‘s sensitivity in watchfulness keeping and its efficiency and veracity in environment sampling. This model may provide valuable inspiration in the implementation of real-time processing and the avoidance of expensive computation cost in machine vision.     

Human respiration rate estimation using ultra-wideband distributed cognitive radar system

It has been shown that remote monitoring of pulmonary activity can be achieved using ultra-wideband (UWB) systems,which shows promise in home healthcare, rescue, and security applications. In this paper, we first present a multi-ray propagation model for UWB signal, which is traveling through the human thorax and is reflected on the air/dry-skin/fat/muscle interfaces. A geometry-based statistical channel model is then developed for simulating the reception of UWB signals in the indoor propagation environment. This model enables replication of time-varying multipath profiles due to the displacement of a human chest. Subsequently,a UWB distributed cognitive radar system (UWB-DCRS) is developed for the robust detection of chest cavity motion and the accurate estimation of respiration rate. The analytical framework can serve as a basis in the planning and evaluation of future measurement programs. We also provide a case study on how the antenna beamwidth affects the estimation of respiration rate based on the proposed propagation models and system architecture.     

Ganglion-Based Balance Design of Multi-Layer Model and Its Watchfulness-Keeping

An important problem of machine vision is the balance among the efficiency, accuracy and computation cost. The visual system of man can keep watchfulness to the perimeter of a visual field and subtly process information emerging in the center of the visual field at the same time. This kind of requirement assignment of computation can virtually ease the demand of hardware both in quantity and complexity. Therefore designing an artificial model based on biological mechanism is an effective approach. In this paper a multi-layer neural model is designed based on the multi-scale receptive fields of ganglions in retina. The model can keep watch on the periphery part of a scene while processing the center information of the scene. And why it can balance the hardware complexity, processing precision and computational intensity is analyzed. An experiment is done to test the model's sensitivity in watchfulness keeping and its efficiency and veracity in environment sampling. This model may provide valuable inspiration in the implementation of real-time processing and the avoidance of expensive computation cost in machine vision.     

Automatic modeling algorithm of stochastic error for inertial sensors

This paper proposes an automatic algorithm to determine the properties of stochastic processes and their parameters for inertial error. The proposed approach is based on a recently developed method called the generalized method of wavelet moments (GMWM), whose estimator was proven to be consistent and asymptotically normally distributed. This algorithm is suitable mainly (but not only) for the combination of several stochastic processes, where the model identification and parameter estimation are quite difficult for the traditional methods, such as the Allan variance and the power spectral density analysis. This algorithm further explores the complete stochastic error models and the candidate model ranking criterion to realize automatic model identification and determination. The best model is selected by making the trade-off between the model accuracy and the model complexity. The validation of this approach is verified by practical examples of model selection for MEMS-IMUs (micro-electro-mechanical system inertial measurement units) in varying dynamic conditions.     

Vibration target detection and vibration parameters estimation based on the DPCA technique in dual-channel SAR

This paper proposes a new method based on the displaced phase center antenna(DPCA) technique for the detection and parameters estimation of vibration target in dual-channel synthetic aperture radar(SAR).The echo model of vibration target is established in dual-channel SAR according to the equivalent phase center principle.By accumulating the DPCA signal amplitude in the azimuth direction,we realize the vibration target detection in clutter and noise background.Through the analysis of DPCA signal amplitude and phase characteristics of vibration target,we then convert the vibration parameters estimation to estimation of a signal with the form of absolute value of a sine function,and the converting conditions is also given.Accordingly,an algorithm combining the Fourier transform with least squares is proposed for estimation.The simulation results show that the algorithm can estimate each vibration parameter precisely at a low signal-to-noise ratio.     

Coherent processing for ISAR imaging with sparse apertures

To implement target detection,tracking and imaging in a multifunctional radar system,the wideband measurements for inverse synthetic aperture radar(ISAR)imaging are usually sparsely recorded.Considering the incoherence problem in such sparse-aperture ISAR(SA-ISAR)systems,we concentrate on the study of a coherent processing method in this work.Based on an all-pole model,the incoherence parameters between abutting sub-apertures can be effectively estimated.After coherence compensation,an optimization-based SAISAR imaging approach is provided from the view of statistics.Simulation and real data experiments validate the feasibility and effectiveness of the proposals.     

Novel parametric optimum processing method for airborne radar

In radar target detection, an optimum processor needs to automatically adapt its weights to the environment change. Conventionally, the optimum weights are obtained by substantial independently and identically distributed (i.i.d.) interference samplings, which is not always realistic in an inhomogeneous clutter background of airborne radar. The lack of i.i.d. samplings will inevitably lead to performance deterioration for optimum processing. In this paper, a novel parametric adaptive processing method is proposed for airborne radar target detection based on the modified Doppler distributed clutter (DDC) model with contribution of clutter's internal motion. It is different from the conventional methods in that the adaptive weights are determined by two parameters of DDC model, i.e., angular center and spread. A low-complexity nonlinear operators approach is also proposed to estimate these parameters. Simulation and performance analysis are also provided to show that the proposed method can remarkably redu     

N4SID and MOESP algorithms to highlight the ill-conditioning into subspace identification

In this paper,an analysis for ill conditioning problem in subspace identifcation method is provided.The subspace identifcation technique presents a satisfactory robustness in the parameter estimation of process model which performs control.As a frst step,the main geometric and mathematical tools used in subspace identifcation are briefly presented.In the second step,the problem of analyzing ill-conditioning matrices in the subspace identifcation method is considered.To illustrate this situation,a simulation study of an example is introduced to show the ill-conditioning in subspace identifcation.Algorithms numerical subspace state space system identifcation(N4SID)and multivariable output error state space model identifcation(MOESP)are considered to study,the parameters estimation while using the induction motor model,in simulation(Matlab environment).Finally,we show the inadequacy of the oblique projection and validate the efectiveness of the orthogonal projection approach which is needed in ill-conditioning;a real application dealing with induction motor parameters estimation has been experimented.The obtained results proved that the algorithm based on orthogonal projection MOESP,overcomes the situation of ill-conditioning in the Hankel s block,and thereby improving the estimation of parameters.     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

Call for Papers The 6^th International Conference on Grid and Cooperative Computing

Recent years have seen rapid advances in various grid-related technologies, middleware, and applications. The GCC conference has become one of the largest scientific events worldwide in grid and cooperative computing. The 6th international conference on grid and cooperative computing (GCC2007) Sponsored by China Computer Federation (CCF),Institute of Computing Technology, Chinese Academy of Sciences (ICT) and Xinjiang University ,and in Cooperation with IEEE Computer Soceity ,is to be held from August 16 to 18, 2007 in Urumchi, Xinjiang, China.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~