工业机器人的小脑模型控制

本文为动力学控制工业机器人提出了一种综合学习算法,这种学习算法可将以前所学的信息用于新的控制输入.这种控制方法不需要事先知道机器人动力学,它易于应用于特殊的控制问题或修改以适应实际系统中的变化,控制方法在时间上是有效的,且很适合于定点实现.学习控制算法的有效性通过4自由度的直接驱动机器人前两个关节在重复运动中的计算机仿真实验得到了验证.     

A robust fuzzy logic controller for robot manipulators withuncertainties

Owing to load variation and unmodeled dynamics, a robot manipulator can be classified as a nonlinear dynamic system with structured and unstructured uncertainties. In this paper, the stability and robustness of a class of the fuzzy logic control (FLC) is investigated and a robust FLC is proposed for a robot manipulator with uncertainties. In order to show the performance of the proposed control algorithm, computer simulations are carried out on a simple two-link robot manipulator.     

欠驱动冗余度空间机器人优化控制

欠驱动控制是空间技术中容错技术的重要方面.本文研究了被动关节中有制动器的欠驱动冗余度空间机器人系统的运动优化控制问题.从系统动力学方程出发,分析了欠驱动冗余度空间机器人的优化能力和控制方法;给出了主、被动关节间的耦合度指标;提出了欠驱动冗余度空间机器人系统的“虚拟模型引导控制”方法,在这种方法中采用与欠驱动机器人机构等价的全驱动机器人作为模型来规划机器人的运动,使欠驱动系统在关节空间中逼近给出的规划轨迹,实现了机器人末端运动的连续轨迹运动优化控制;通过末关节为被动关节的平面三连杆机器人进行了仿真,仿真的结果证明了提出算法的有效性.     

Intelligent tracking control for robot manipulator including actuator dynamics via TSK-type fuzzy neural network

In this paper, a Takagi-Sugeno-Kang-type fuzzy-neural-network control (T-FNNC) scheme is constructed for an n-link robot manipulator to achieve high-precision position tracking. According to the concepts of mechanical geometry and motion dynamics, the dynamic model of an n-link robot manipulator including actuator dynamics is introduced initially. However, it is difficult to design a suitable model-based control scheme due to the uncertainties in practical applications, such as friction forces, external disturbances and parameter variations. In order to cope with this problem, a T-FNNC system without the requirement of prior system information and auxiliary control design is investigated to the joint position control of an n-link robot manipulator for periodic motion. In this model-free control scheme, a five-layer fuzzy-neural-network is utilized for the major control role, and the adaptive tuning laws of network parameters are established in the sense of projection algorithm and Lyapunov stability theorem to ensure the network convergence as well as stable control performance. In addition, experimental results of a two-link robot manipulator actuated by dc servomotors are provided to verify the effectiveness and robustness of the proposed T-FNNC methodology.     

Computer simulation of a parallel link manipulator

A parallel link manipulator has been designed, which may be used as a robot wrist. The dynamic equations of the system have been formulated rigorously without assuming that the displacements and rotations are small. In computer simulation, it is shown that this manipulator can be used to perform tasks such as position control, path tracing, and force control. For each task, the control algorithm is formulated and tested.     

An improved approach to the solution of inverse kinematics problems for robot manipulators

A structured artificial neural-network (ANN) approach has been proposed here to control the motion of a robot manipulator. Many neural-network models use threshold units with sigmoid transfer functions and gradient descent-type learning rules. The learning equations used are those of the backpropagation algorithm. In this work, the solution of the kinematics of a six-degrees-of-freedom robot manipulator is implemented by using ANN. Work has been undertaken to find the best ANN configurations for this problem. Both the placement and orientation angles of a robot manipulator are used to fin the inverse kinematics solutions.     

Laser interferometry-based guidance methodology for high precision positioning of mechanisms and robots

Laser interferometry-based sensing and measurement (LISM) technique was originally investigated to perform dynamic measurements of the end effector of a robot manipulator in motion. This technique can provide dynamic position measurements in real time and has high accuracy, large working space, high sampling rate and automatic target tracking. In this paper, a methodology using LISM technique is proposed to perform laser interferometry-based guidance (LIG) for accurate positioning of a robot manipulator in high precision manufacturing operations. The methodology utilizes the LISM apparatus to guide the robot's end effector to a desired location or along a desired path by directing the robot to follow the trajectory mapped by the laser beam. This is accomplished through the establishment of techniques for path generation, sensing and data acquisition and guidance error determination and compensation in the control algorithm. The algorithms for this methodology, together with the measurement and analysis techniques are described. A number of experiments are carried out to examine and validate the proposed LIG technique. Experimental results show that the established technique can effectively improve the positioning accuracy of the robot manipulator.     

On-line genetic algorithm-based fuzzy-neural sliding mode controller using improved adaptive bound reduced-form genetic algorithm

In this article, a novel on-line genetic algorithm-based fuzzy-neural sliding mode controller trained by an improved adaptive bound reduced-form genetic algorithm is developed to guarantee robust stability and good tracking performance for a robot manipulator with uncertainties and external disturbances. A general sliding manifold, which can be non-linear or time varying, is used to construct a sliding surface and reduce control law chattering. In this article, the sliding surface is used to derive a genetic algorithm-based fuzzy-neural sliding mode controller. To identify structured system dynamics, a B-spline membership function fuzzy-neural network, which is trained by the improved genetic algorithm, is used to approximate the regressor of the robot manipulator. The sliding mode control with a general sliding surface plays the role of a compensator when the fuzzy-neural network does not approximate the dynamics regressor of the robot manipulator well in the transient period. The adjustable parameters of the fuzzy-neural network are tuned by the improved genetic algorithm, which, with the use of the sequential-search-based crossover point method and the single gene crossover, converges quickly to near-optimal parameter values. Simulation results show that the proposed genetic algorithm-based fuzzy-neural sliding mode controller is effective and yields superior tracking performance for robot manipulators.     

State and Impedance Reflection Based Control Interface for Bilateral Telerobotic System with Asymmetric Delay

In this paper, we investigate state and imped-ance reflection based robust control strategy for bilateral shared telerobotic system under unsymmetrical time varying delay. Shared input for both master and slave robot is designed by combining delayed position and position-velocity signals with impedance reflection properties of the interaction between slave and environment and between human and master robot manipulator. Adaptive control algorithm is proposed to estimate the interaction properties between human and master manipulator and between slave and remote environment. Then, the delayed estimated interaction properties are reflected back to the master and slave robot manipulator to match with the estimated impedance properties of the interaction between human and remote environment. We combine robust term with adaptive control term to deal with the uncertainty associated with gravity loading vector, unmodeled dynamic and external disturbance. The stability conditions with time varying delays are derived by using Lyapunov-Krasovskii functional. Experimental results are given to demonstrate the validity of the proposed design for real-time applications.     

A novel path planning and control framework for passive resistance therapy with a robot manipulator

In this article, we present a paradigm for safe path generation and control for a robotic manipulator such that it provides programmable passive resistance therapy to patients with deficits in the upper extremities. When the patient applies an interaction force at the robot's end-effector, a dynamic path generator time parameterises any therapist-specified contour in the robot's workspace–thus, the robot mimics the dynamics of a passive impedance whose anisotropy vector can be continuously reconfigured. The proposed algorithm is easily implementable because it is robust to uncertainty in the robot dynamics. Moreover, the proposed strategy also guarantees user safety by maintaining the net flow of energy during the human robot interaction from the user towards the manipulator.