带有多非线性干扰观测器的电液伺服反演控制

针对高阶不匹配不确定非线性电液伺服系统,提出一种动态面反演控制策略,以实现对电液伺服系统的位置控制.采用多个非线性干扰观测器观测出电液伺服系统的各阶子系统的不确定项和干扰项,对使用非线性干扰观测器后的系统实行反演控制,使用动态面方法来解决传统反演控制中虚拟控制量随着系统阶数的增加而愈加繁杂的问题.基于Lyapunov方法从理论上证明了所设计的系统控制器能够保证闭环系统有界稳定,系统中所有信号是一致最终有界的,仿真结果验证了反演控制方法的正确性.     

飞行模拟转台非线性干扰观测器反步滑模控制器设计

本文针对考虑不确定性的飞行模拟转台伺服系统,提出了一种基于非线性干扰观测器的反步全局滑模补偿控制方法。该方法采用反步控制方法设计转速期望虚拟控制,然后利用非线性干扰观测器观测系统不确定干扰,进而对引入非线性干扰观测器的系统设计自适应全局滑模控制器,实现了飞行模拟转台伺服系统期望转角信号的鲁棒跟踪控制,仿真结果表明,该方法控制效果良好,具有很好的工程应用价值。     

智能观测器在伺服系统控制中的应用

研究优化伺服控制系统策略,永磁同步电动机( PMSM)的伺服系统优化,可改善电动机系统的稳定性和响应特性.通过提高伺服系统定位精度和抗干扰能力,有效保证机器运行效率.针对传统有速度传感器矢量控制增加了系统复杂度和成本的问题,为优化伺服系统控制结构,提出了一种采用神经网络观测器的伺服系统无速度传感器矢量控制策略.系统中不需要安装传感器来检测PMSM转子位置/速度信号,而是利用神经网络观测器从电机反电动势信号中估算转子位置/速度,从而优化了系统整体结构,减小了系统复杂度.通过对PMSM的伺服系统无速度传感器矢量控制系统的建模与仿真测试,结果表明,所设计的神经网络观测器能够准确估算转子位置/速度,控制系统能够精确跟踪给定转速指令,改进了伺服系统优化控制问题,为实际应用提供了参考.     

滑模观测器在大惯量扫描镜系统中抗谐振的应用

针对扫描镜伺服控制系统中柔性连接所导致的机械谐振问题, 本文提出一种结合电机加速度反馈以及负 载速度反馈的滑模观测器控制方法. 首先建立伺服系统柔性连接的数学模型并分析谐振对系统性能的影响; 然后 给出滑模观测器的设计过程; 随后将观测出的电机加速度以及负载速度反馈到伺服系统中进行补偿; 最后分析了 位置传感器对伺服系统控制性能的影响, 系统的鲁棒性, 并与相似被控条件下的其他控制方法进行了比较. 仿真结 果表明: 与未采用观测器时相比, 本文所提出的方法有效地抑制了基于柔性连接的伺服系统中的机械谐振问题, 提 高了系统的控制性能, 且具有较高的鲁棒性.     

基于扩张状态观测器的二质量系统非奇异快速终端滑模控制

针对含未知负载信息的二质量伺服系统,提出一种基于有限时间扩张状态观测器的非奇异快速终端滑模控制方法.首先,利用电机侧位置信息设计有限时间扩张状态观测器估计系统的扰动,并将估计值融入到控制器中作为前馈项对系统的未知扰动进行补偿;然后,引入一种新型的滑模趋近律,该趋近律能够避免传统滑模控制中存在的奇异性问题,据此设计非奇异快速终端滑模控制器,保证系统状态在有限时间内收敛到原点,并根据李雅普诺夫稳定性理论分析闭环系统的稳定性;最后,通过仿真和实验验证所提出方法的优越性.结果表明,与传统的PID等控制相比较,所提出的基于扩张状态观测器的有限时间滑模控制方法能够提高系统的跟踪性能,并有效增强二质量伺服系统的抗扰动能力.     

多故障并发非线性系统一体化跟踪主动容错控制器设计

针对一类执行器及传感器同时发生故障的非线性系统,综合鲁棒滑模重构观测器及自适应滑模容错控制器设计技术,提出一体化跟踪主动容错控制方案.首先,将系统增维变换为广义系统,运用广义约束逆引入辅助矩阵,采用线性矩阵不等式设计观测器系数矩阵,综合自适应律给出广义鲁棒滑模观测器设计程式;在此基础之上,通过设计鲁棒滑模微分器估计输出向量微分,结合广义鲁棒滑模观测器状态估计结论,实现执行器及传感器故障同时重构.其次,基于故障重构及状态估计结论,提出自适应滑模的跟踪主动容错控制律设计程式.最后,通过开展飞行模拟转台伺服系统数值仿真,检验一体化跟踪主动容错控制器设计方法的有效性.     

基于ESO的BTT导弹自动驾驶仪滑模反演设计

针对BTT导弹非线性动力学模型中的参数不确定性及系统存在未知外部干扰的问题,提出了一种基于扩张状态观测器的反演滑模控制设计方法。将系统参数不确定性和未知外界干扰作为系统的复合干扰,采用扩张状态观测器估计系统的复合干扰,并实时补偿。利用Lyapunov方法证明系统的稳定性。设计的控制器算法简单、计算量小,更易于实际工程应用。仿真结果表明,设计的控制器对导弹控制系统受到的复合干扰具有较强的鲁棒性和稳定性,满足导弹姿态快速机动和高稳定度的控制要求,性能指标明显优于滑模反演控制器。     

电液位置伺服系统内模鲁棒控制器的设计

针对电液位置伺服系统存在一定的参数不确定性和较大的负载扰动等问题,建立了电液位置伺服线性系统的数学模型,并将其转化为H∞性能准则问题.利用H∞鲁棒控制理论,设计了电液位置伺服控制系统的鲁棒状态反馈控制器;基于内模原理的设计方法,设计了跟踪控制器.仿真结果表明,该位置鲁棒跟踪控制系统不仅对于伺服系统的参数不确定性有较好的控制效果,而且可以有效地抑制位置伺服系统负载扰动的影响,并有效地提高系统的跟踪特性,使系统具有良好的动态性能.     

电液伺服系统的多滑模鲁棒自适应控制

针对一类参数与外负载非匹配不确定的非线性高阶系统,提出了一种基于逐步递推方法的多滑模鲁棒自适应控制策略.应用逐步递推的多滑模控制方法简化了高阶系统的控制问题,同时在自适应控制中加入鲁棒控制的方法,以消除不确定性对控制性能的影响.首先利用逐步递推方法与状态反馈精确线性化理论,得出确定系统的多滑模控制器设计方法;然后基于Lyapunov稳定性分析方法,给出不确定系统的参数自适应律,及鲁棒自适应控制器的设计方法.本文把该控制策略应用到电液伺服系统的位置跟踪控制中,仿真结果显示,该控制方法具有较强的鲁棒性及良好的跟踪效果.     

滑模变控制在CNC精密成型磨削设备上的DSP实现

本文阐述了一种应用在CNC精密成型磨削设备上的新型控制系统,采用基于DSP芯片的永磁同步电机(PMSM)构成其伺服系统.在PMSM矢量控制中,需要利用转子位置信息实现转子磁场高性能的定向控制.本文设计了一个基于滑模观测器的无传感器矢量控制系统,以估算电机转子位置.并介绍了利用DSP实现的软件和硬件设计.仿真结果表明,由该滑模观测器构成的控制系统具有良好的动态性能和稳态品质.     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

Call for Papers The 6^th International Conference on Grid and Cooperative Computing

Recent years have seen rapid advances in various grid-related technologies, middleware, and applications. The GCC conference has become one of the largest scientific events worldwide in grid and cooperative computing. The 6th international conference on grid and cooperative computing (GCC2007) Sponsored by China Computer Federation (CCF),Institute of Computing Technology, Chinese Academy of Sciences (ICT) and Xinjiang University ,and in Cooperation with IEEE Computer Soceity ,is to be held from August 16 to 18, 2007 in Urumchi, Xinjiang, China.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~