具有输入约束和输出噪声的不确定系统级联线性自抗扰控制EI北大核心CSCD

针对一类具有输入约束和输出噪声的SISO(Single input single output)不确定非线性系统,提出了一种基于误差补偿和工程滤波的抗饱和级联线性自抗扰控制(Linear active disturbance rejection control,LADRC)方法.首先针对高频量测噪声,分析了线性扩张状态观测器(Linear extended state observer,LESO)对噪声的放大机理及其与观测器增益的定量关系,进而设计了一种基于工程滤波器的级联LADRC方法,在滤除噪声的同时有效补偿了因滤波所造成的输出幅值和相位损失,确保了闭环系统的跟踪精度.然后继续考虑输入饱和的问题,利用LADRC的实时估计/补偿能力,通过将饱和差值信号引入LESO,设计了一种基于误差补偿的抗饱和LADRC方法,有效减小了系统设计控制量,避免了系统长时间陷入饱和.通过实时仿真比较,验证了所提出方法的有效性.     

负荷频率控制系统的线性自抗扰控制

本文研究负荷频率控制系统的线性自抗扰控制(linear active disturbance rejection, LADRC)方法. 考虑负荷频率控制系统的模型及结构, 本文首先通过一仿真例子分析了二阶和三阶LADRC在单区域电力系统的控制性能,指出二阶LADRC在负荷频率控制中的限制. 随后本文针对负荷频率控制中存在的发电速率约束(generation rate constraint, GRC)这一实际问题, 提出一种anti-GRC补偿方案. 该方案将汽轮机理论输出与实际输出误差作为扰动输入, 利用扩张状态观测器进行估计, 从而使LADRC能够快速补偿该误差, 达到抗积分饱和的作用. 最后, 本文将LADRC设计方法推广到具有再热汽轮机和水轮机系统以及多区域电力系统. 仿真表明LADRC是一种独立于模型的普适性控制结构, 所需整定参数少, 能够取得比PID控制更好的抗干扰性能, 可以应用到负荷频率控制系统中.     

基于高阶控制器设计的线性自抗扰控制参数调整

将反馈控制器/扩张状态观测器闭环极点配置在同一位置是线性自抗扰控制器(linear active disturbance rejection control,LADRC)最常用的整定方法.该方法只需调整两个参数,在工程应用上极为方便.但是,由于极点配置在同一位置的限制,整定的LADRC可能达不到期望的性能.本文提出以现有控制器参数为基础的LADRC调参方法.该方法以现有控制器参数为基础,通过降阶及逼近,保证LADRC控制能接近现有控制系统的性能.仿真设计表明采用高阶控制器设计的LADRC可以取得与原有控制系统相当的控制性能.该方法不受带宽法调参的需使反馈控制器及扩张观测器极点配置在同一位置的限制,因此可以期望获得比带宽法更好的性能.同时,该方法为已经熟悉掌握其他控制器设计方法的工程控制人员提供了一种便捷的调整线性自抗扰控制参数的方案,具有较好的应用价值.     

自抗扰实现飞翼布局无人机全包线飞行控制

本文以大展弦比飞翼布局无人机为研究对象,基于线性自抗扰控制(linear active disturbance rejection control,LADRC)理论设计了包含内环姿态控制和外环轨迹控制的全包线飞行控制器.在姿态控制中,提出一种抗时滞LADRC控制方法,可以有效解决控制延迟和执行机构动态特性引起的LADRC响应振荡;在轨迹控制中,考虑飞翼布局无人机的气动特性,分别设计了高度、航向、侧向偏离等常用飞行模态的跟踪控制器.仿真结果表明,在气动参数存在不确定性及强风干扰的全包线环境中连续飞行时,所设计的控制器具有较好的控制性能和较强的鲁棒特性.与常规全包线控制方案相比,本文设计的全包线飞行控制器待整定参数较少,参数整定过程相对简单,为进一步的工程应用提供了参考.     

线性自抗扰控制器的稳定性研究

研究了线性扩张状态观测器(Extended state observer, ESO)的估计能力,并且分析了在线性自抗扰控制(Linear active disturbance rejection control, LADRC)下闭环系统的稳定性. 对于系统模型未知的情形, 给出了线性扩张观测器估计误差有界的证明, 并通过分析得出了如下结论: 在扩张状态观测器跟踪误差趋于零的前提下, 在线性自抗扰控制下的闭环系统可以实现对设定信号的精确跟踪以及输入-输出有界(Bounded input and bounded output, BIBO)稳定.     

基于PID参数整定的线性自抗扰控制参数整定

线性自抗扰控制(linear active disturbance rejection control,LADRC)是不依赖于被控对象的数学模型,在工业过程中具有极大的应用前景,LADRC参数整定是其在工业过程中能否应用的重要环节.鉴于实际工业控制中大都采用PID控制器,通过对二阶LADRC结构与其状态观测器的传递函数进行分析,得到二阶LADRC与PID控制器具有较强的联系,且LADRC比PID有着更好的控制性能.提出一种通过现有PID参数直接得到LADRC参数初始值的方法,以达到更好的控制性能,并基于一阶惯性加时延模型,得到将现有PID整定方法转化为二阶线性自抗扰控制参数整定方法.最后通过基准系统仿真表明所提出方法的有效性.     

基于大变异遗传算法进行参数优化整定的负荷频率自抗扰控制

本文将自抗扰控制(active disturbance rejection control,ADRC)应用到两区域互联电力系统的负荷频率控制(load frequency control,LFC)中,从具有非再热式汽轮机机组的电力系统模型推广到具有水轮机机组的以及考虑发电速率约束和调速器死区的再热式汽轮机组的电力系统模型,涉及线性、非线性和非最小相位特性3种控制对象,并使用大变异遗传算法对控制器的参数进行整定,与基于大变异遗传算法的PI控制进行仿真比较研究,仿真表明本文所提基于大变异遗传算法的负荷频率自抗扰控制动态响应快、偏差小、鲁棒性好、抗干扰能力强,对于LFC系统更为有效。     

基于VSG微网储能变流器无缝切换控制策略研究

针对微网储能变流器采用状态跟随控制器进行切换的过程中存在微小电压、电流扰动等问题,本文提出了一种基于线性自抗扰控制器(LADRC)的无缝切换控制策略。在采用P/Q控制和VSG控制相互切换方法的基础上,将电流内环控制器改成线性自抗扰控制器。通过设计一个状态观测器LESO实时在线观测估计输出变量直轴、交轴电流id、iq以及系统的各种扰动;将扰动估计值补偿给P/Q控制器和VSG控制器切换过程中的突变量,从而抑制切换过程中的电压、电流波动。最后,建立基于LADRC的储能变流器无缝切换仿真模型。仿真结果验证了该方法的可行性。     

高阶线性自抗扰控制器的性能评估

以二阶系统为研究对象,在线性扩张观测器(LESO)的基础上,给出高增益形式的高阶LESO.基于高阶线性自抗扰控制器(HLADRC)二自由度闭环传递函数和频域特性曲线,证明了其状态估计误差的收敛性以及高阶线性自抗扰控制器的稳定性.同时,系统地分析了输入增益和模型参数不确定性对稳定鲁棒性的影响,推导出满足系统稳定条件的参数??的稳定域以及系统干扰抑制动态特性与带宽的关系.最后,通过与线性自抗扰控制器(LADRC)的对比仿真表明, HLADRC在干扰抑制方面具有很大的优势,而LADRC在稳定鲁棒性和控制品质方面具有更好的效果,从而为工程设计提供了理论依据和实践参考.     

抄纸过程水分定量自抗扰控制仿真研究

针对抄纸过程水分定量系统控制中的强耦合、时滞、不确定等特点,在常规PID控制的基础上提出了自抗扰控制这种新的法,方法的特点是可以动态补偿系统模型扰动和外扰,即克服了常规PID控制中存在的快速性与超调之间的矛盾.自抗扰控制器由微分一跟踪器、扩张状态观测器和非线性状态误差反馈三部分组成.最后对自抗扰控制和PID控制算法分别进行了仿真.并分析比较了这两种不同控制算法的仿真效果,结果表明自抗扰控制系统具有良好的动态性能,控制器具有很强的鲁棒性.     

共轴八旋翼无人飞行器的偏航静态抗饱和补偿控制

设计了一种共轴八旋翼无人飞行器,与四旋翼飞行器相比,其具有更大的驱动能力、更强的带载能力和一定的冗余能力．首先,建立了飞行器的动力学模型．针对共轴八旋翼飞行器偏航运动能力比俯仰、滚转运动能力弱,偏航容易出现执行器饱和现象的问题,从实际工程出发提出了基于线性自抗扰控制器的静态抗饱和补偿器．线性自抗扰算法易于工程调节,能够实时估计与补偿外界扰动．静态抗饱和补偿器不增加系统阶次,有效抑制偏航执行器饱和．利用李亚普诺夫稳定理论证明了基于线性自抗扰控制器的静态抗饱和偏航控制系统的稳定性．最后,通过共轴八旋翼飞行器的仿真实验与原型机比较实验验证了算法的有效性与鲁棒性．原型机实验结果表明：在室内固定干扰下,执行器退出饱和的最长时间约为4 s,偏航角误差收敛到±0.085 rad;在室外变干扰下,执行器退出饱和的最长时间约为9 s,偏航角误差收敛到±0.127 rad．基于线性自抗扰控制器的静态抗饱和补偿器在外界干扰情况下能够有效地抑制执行器饱和,具有良好的偏航控制性能与强鲁棒性．     

Piecewise Fuzzy Anti-Windup Dynamic Output Feedback Control of Nonlinear Processes With Amplitude and Rate Actuator Saturations

In this paper, a novel anti-windup dynamic output compensator is developed to deal with the robust H _infin output feedback control problem of nonlinear processes with amplitude and rate actuator saturations and external disturbances. Via fuzzy modeling of nonlinear systems, the proposed piecewise fuzzy anti-windup dynamic output feedback controller is designed based on piecewise quadratic Lyapunov functions. It is shown that with sector conditions, robust output feedback stabilization of an input-constrained nonlinear process can be formulated as a convex optimization problem subject to linear matrix inequalities. Simulation study on a strongly nonlinear continuously stirred tank reactor (CSTR) benchmark plant is given to show the performance of the proposed anti-windup dynamic compensator.     

Error-constrained path-following control for a stratospheric airship with actuator saturation and disturbances

This paper is concerned with the path-following control problem for an under-actuated stratospheric airship with error constraint, actuator saturation, and external disturbances. To address the tracking error-constrained requirements of airship position and attitude, novel tan-type barrier Lyapunov functions are proposed and incorporated with the guidance and attitude control schemes, which calculate the desired attitude and angular velocity. An auxiliary design system in the form of anti-windup compensator is employed to deal with actuator saturation, and the stability of the saturated control solution is verified. Nonlinear disturbance observer is developed to estimate the unknown external disturbances. Rigorous stability analysis shows that the constrained requirements on the airship position and attitude will not be violated under the proposed control method and all closed-loop signals are uniformly ultimately bounded, despite the presence of actuator saturation and disturbances. Simulation results and comparisons illustrate the effectiveness of the proposed controller.     

An approximated scalar sign function approach to optimal anti-windup digital controller design for continuous-time nonlinear systems with input constraints

This article presents an approximated scalar sign function-based digital design methodology to develop an optimal anti-windup digital controller for analogue nonlinear systems with input constraints. The approximated scalar sign function, a mathematically smooth nonlinear function, is utilised to represent the constrained input functions, which are often expressed by mathematically non-smooth nonlinear functions. Then, an optimal linearisation technique is applied to the resulting nonlinear system (with smooth nonlinear input functions) for finding an optimal linear model, which has the exact dynamics of the original nonlinear system at the operating point of interest. This optimal linear model is used to design an optimal anti-windup LQR, and an iterative procedure is developed to systematically adjust the weighting matrices in the performance index as the actuator saturation occurs. Hence, the designed optimal anti-windup controller would lie within the desired saturation range. In addition, the designed optimal analogue controller is digitally implemented using the prediction-based digital redesign technique for the effective digital control of stable and unstable multivariable nonlinear systems with input constraints.     

Optimal anti-windup synthesis for repetitive controllers

Repetitive controllers use internal models that provide very high gain at a selected fundamental frequency and its harmonics, additionally, some of the internal models may result unstable, as in the high order repetitive control approach. These characteristics make the repetitive control system susceptible to exhibit wind-up when actuator saturation occurs. This paper proposes an anti-windup scheme for repetitive control based on the model recovery anti-windup strategy. The proposed scheme provides low order, low computational burden and also isolation of the controller from the saturation effects. The anti-windup compensator is constructed from the plant model and provides an additional linear feedback path aimed at enhancing system performance. This feedback path is designed to obtain a deadbeat behaviour, which makes the system recovery faster. Finally, internal stability and deadbeat features are designed in a compact procedure based on linear matrix inequalities and an optimal linear quadratic design. Experimental validation of the proposed anti-windup compensator is provided using a mechatronic plant.     

Design of multiple anti-windup loops for multiple activations

This paper considers anti-windup design for linear systems subject to actuator saturation.Three anti-windup gains are designed for activations immediately at the occurrence actuator saturation,after the saturation has reached a certain level and in anticipation of the occurrence of saturation,respectively.The design is based on the minimization of L 2 gain from the disturbance to the controlled output of the resulting closed-loop system.Traditional anti-windup scheme involves a single anti-windup loop for immediate activation.A recent innovation is to design a single anti-windup loop for delayed or anticipatory activation,as well as to design two anti-windup gains,one for immediate activation and one for delayed activation.Our design of three anti-windup gains for three different activations is shown through simulation to lead to significant further performance improvement over the previous activation schemes.     

单输入线性系统的改进型动态抗饱和设计

本文基于状态重置的改进型动态抗饱和补偿方案, 研究了具有单输入的线性饱和系统的抗饱和控制问题. 相比较于传统的动态抗饱和补偿方案, 当执行器不饱和时, 改进的动态抗饱和补偿方案把动态抗饱和补偿器的状态重置为零. 所以当执行器不饱和时, 改进的动态抗饱和补偿器将不会对控制器进行补偿. 进一步的, 提出了一个时间依赖的Lyapunov函数来分析闭环系统的稳定性, 并以LMIs的形式给出了闭环系统的控制综合条件. 最后, 通过压电纳米运动平台验证了所提出的改进型动态抗饱和补偿方案的有效性。