并网光伏逆变器鲁棒分数阶滑模控制设计

本文设计了一款基于扰动观测器的鲁棒分数阶滑模控制(POFO–SMC)来实现光伏逆变器的最大功率跟踪(MPPT).首先,将光伏逆变器的非线性、参数不确定性以及未建模动态聚合成一个扰动,并通过扰动观测器对其进行在线估计.随后,采用分数阶滑模控制(FOSMC)对该扰动估计进行实时完全补偿,从而实现不同工况下全局一致的控制性能.同时,POFO–SMC采用扰动实时估计而非传统滑模控制(SMC)中所使用的扰动上限值进行补偿,因此可有效解决传统SMC过于保守的缺点,使得控制成本更为合理.最后,POFO–SMC无需精确的系统模型,仅需测量光伏逆变器的q轴电流和直流侧电压,因此易于硬件实现.本文进行了两个算例的研究,即光照强度变化和电网电压跌落.仿真结果表明,与传统PI控制、反馈线性化控制(FLC)、SMC和FOSMC相比,POFO–SMC在各类工况下均具有最好的动态特性及最高的鲁棒性.基于dSpace的硬件在环实验(HIL)验证了其硬件可行性.     

适用于仿生眼的与模型无关的滑模阻抗控制

本文针对仿生眼系统,提出一种PD型的滑模控制方法(proportion differential control with sliding mode cont-rol, PD–SMC).该方法与模型无关,并将传统阻抗控制(PD控制)与滑模控制(sliding mode control, SMC)结合在一起,具有类似PD控制方法结构简单、易于实现的优点,并且针对系统参数的不确定性以及当系统存在外部扰动时,具有滑模控制方法(SMC)本身固有的强鲁棒性.文中设计的PD–SMC控制器中, PD控制环节使仿生眼系统实现稳定的运动控制, SMC控制环节用于补偿不确定的系统参数以及系统受到的外部扰动.利用Lyapunov方法以及拉塞尔不变性原理证明了闭环系统的稳定性与收敛性.仿真结果表明所提控制方法具有很好的跟踪控制性能.     

直流降压变换器的降阶扩张状态观测器与滑模控制设计与实现

本文针对直流降压变换器的负载电阻扰动和输入电压变化等系统不确定因素对输出电压的影响,提出了基于降阶扩张状态观测器的滑模控制方法(SMC+RESO).首先设计降阶扩张状态观测器对系统状态,负载电阻扰动和输入电压变化进行估计,然后基于估计值利用滑模控制技术设计控制器,实现对直流降压变换器系统给定电压跟踪的快速性和准确性.值得注意的是,不同于文[1]所提出的基于扩张状态观测器的滑模控制方法(SMC+ESO),本文所提出的方法采用降阶扩张状态观测器,实现简单,且无需电流传感器,减小了实际应用的成本.利用Lyapunov稳定性定理从理论上证明了所设计的控制器可以保证闭环系统的稳定性.仿真和实验结果表明,与已有的基于扩张状态观测器的滑模控制方法相比,所提出的控制方法更好地改善了系统的跟踪性能和对干扰和不确定性的鲁棒性能,且减少了成本,但是牺牲了系统稳态性能.     

一类高阶非线性系统的终端滑模复合控制

研究干扰观测器的控制与自适应终端滑模控制思想相结合,针对调整非线性系统跟踪误差,为了提高控制性能,提出一种适用于一类岛阶非线性系统的复合控制策略.通过引入干扰观测器对系统中存在的不确定进行估计,并利用估计结果对滑模控制输出进行补偿.根据干扰观测器的估计值设计自适应律,实现终端滑模控制器中的切换增益,根据系统扰动的大小进行自适应调节,从而改善由于固定切换增益所造成的滑模控制器输出量过大以及抖振等现象.基于Lyapunov理论证明了复合控制的稳定性,最后通过仿真进一步验证了控制策略的可行性及有效性.     

模糊滑模控制和负载转矩补偿的异步电动机直接转矩控制

针对异步电动机(IM)转矩脉动以及抗干扰能力差的问题,设计了基于模糊滑模控制(FSMC)与负载转矩补偿的新型直接转矩控制(DTC),取代传统PID速度调节器的是一种滑模控制器.为解决滑模控制器中负载转矩脉动的问题,用模糊逻辑控制器取代了传统滑模控制律中的不连续部分,可以明显降低异步电动机在低速运转时的转矩脉动.提出了一种负载转矩观测器来估计未知的负载转矩.负载转矩观测器用来估计负载转矩扰动,估计作为速度环的前馈补偿.仿真结果表明:在低速负载转矩扰动时,该设计具有更好的动态响应和速度性能、更高鲁棒性和更强的抗干扰能力.     

四旋翼飞行器的轨迹跟踪抗干扰控制

针对四旋翼飞行器轨迹跟踪问题中系统存在模型不确定和易受到外界扰动的情况,提出了基于切换函数的扩张状态观测器设计方法来对系统中的扰动进行估计,并将估计值与滑模控制器的设计相结合,实现了对系统中非匹配不确定性和匹配不确定性的抑制且实现了系统跟踪误差的一致最终有界.首先,根据变量间的耦合关系将飞行器系统模型分解为两个子系统模型,设计扩张状态观测器对子系统中的非匹配不确定性进行估计,并将估计值作为变量加入到切换函数的设计中;进而基于切换函数设计扩张状态观测器以估计经切换函数重构系统中的扰动,并在控制器中对扰动进行补偿.最后通过李雅普诺夫理论证明了控制系统的稳定性.通过仿真验证了本文提出的方法能够有效实现飞行器轨迹跟踪控制且能够抑止传统滑模控制的抖振现象.     

状态测量不确定和动力学未知的无人艇固定时间容错控制

针对含有推进器故障和状态测量不确定的无人艇(Unmanned surface vehicle, USV)系统,提出一种基于双扰动观测器的固定时间容错跟踪控制(Double disturbance observer-based fixed-time fault-tolerance control, DDO-FxFC)方法.设计两个固定时间扰动观测器,分别估计状态测量不确定性产生的非匹配干扰和包含推进器故障的集总非线性,同时自适应实时补偿未知观测误差;采用测量位姿跟踪误差及其动态,设计快速非奇异终端滑模面,构建DDO-FxFC框架;理论分析证明DDO-FxFC方法能够确保跟踪误差固定时间收敛,其中收敛时间的上界独立于系统初始状态;针对原型USV的仿真结果和综合对比验证所提出DDO-FxFC技术的有效性和优越性.     

扰动下永磁同步风力发电机的改进滑模控制

针对永磁直驱同步风力发电机传统PI矢量控制方式鲁棒性差的问题,提出一种非奇异快速终端滑模控制方法.针对滑模控制中的抖振问题,在指数趋近律中引入光滑连续的双曲正切函数代替符号函数;针对滑模控制中的外部扰动问题,采用扩张状态观测器进行在线估计和补偿,得出基于扩张状态观测器的非奇异快速终端滑模控制器.使用Matlab/Simulink对永磁直驱同步风力发电机控制系统进行了仿真分析,并与传统线性PI控制方式进行对比,仿真结果验证了该新型滑模控制系统具有响应速度快、抗扰性能强、稳态精度高等优越性.     

具有边界扰动的不确定Euler-Bernoulli梁方程输出反馈控制

针对带有边界扰动、内部不确定扰动和外部扰动的Euler-Bernoulli梁方程,为克服传统扰动观测器引入的高增益及未知扰动导数难以准确求解问题,本文将主动干扰抑制控制(ADRC)技术应用到Euler-Bernoulli梁方程这个偏微分方程(PDE)系统上,提出并设计了一种新的在线扰动观测器,可实时估计扰动值.依据估计扰动值,设计了一个边界输出反馈控制器.仿真结果表明,本文所提出的方法可很好地实现对内部不确定扰动和外部扰动的估计,配合输出反馈控制器,可对边界扰动进行有效抑制,进而实现系统的指数稳定.     

一种基于时变干扰观测器的高超声速飞行器容错控制策略设计

为了提高高超声速再入飞行器(HRV)在执行机构故障情况下的姿态控制效果,提出一种基于时变干扰观测器和参考轨迹重构器(RVG)的滑模容错控制策略.首先,设计一种新型自适应干扰观测器(ADO)来估计系统扰动,在保证估计精度的同时,能够有效削弱传统干扰观测器的初始超调现象;然后,基于反步法设计HRV的滑模控制器,在设计中引入参考轨迹重构器以避免故障突变引起的初始尖峰,并且在滑模面的设计中利用ADO所估计的系统扰动实现干扰的在线补偿.仿真结果表明,所设计的控制策略可以有效解决传统的基于高增益干扰观测器的滑模控制律受故障引起的突变和初始估计误差造成控制系统动态性能恶化的问题.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Call for Papers The 6^th International Conference on Grid and Cooperative Computing

Recent years have seen rapid advances in various grid-related technologies, middleware, and applications. The GCC conference has become one of the largest scientific events worldwide in grid and cooperative computing. The 6th international conference on grid and cooperative computing (GCC2007) Sponsored by China Computer Federation (CCF),Institute of Computing Technology, Chinese Academy of Sciences (ICT) and Xinjiang University ,and in Cooperation with IEEE Computer Soceity ,is to be held from August 16 to 18, 2007 in Urumchi, Xinjiang, China.     

法律信息库系统

本文分析了法律数据库的结构和特点，介绍了采用面向对象设计方法和超文本数据库技术开发和实现法律信息库系统将作为重要网络资源之一为不同用户进行法律咨询服务。     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

International Journal of Automation and Computing Table of Contents

正~~     

Information for authors

正SCIENCE CHINA Information Sciences(Sci China Inf Sci),cosponsored by the Chinese Academy of Sciences and the National Natural Science Foundation of China,and published by Science China Press,is committed to publishing highquality,original results of both basic and applied research in all areas of information sciences,including computer science and technology;systems science,control science and engineering(published in Issues with odd numbers);information and communication engineering;electronic science and technology(published in Issues with even numbers).Sci China Inf Sci is published monthly in both print and electronic forms.It is indexed by Academic OneFile,Astrophysics Data System(ADS),CSA,Cabells,Current Contents/Engineering,Computing and Technology,DBLP,Digital Mathematics Registry,Earthquake Engineering Abstracts,Engineering Index,Engineered Materials Abstracts,Gale,Google,INSPEC,Journal Citation Reports/Science Edition,Mathematical Reviews,OCLC,ProQuest,SCOPUS,Science Citation Index Expanded,Summon by Serial Solutions,VINITI,Zentralblatt MATH.     

Erratum to: Fast global kernel fuzzy c-means clustering algorithm for consonant/vowel segmentation of speech signal

正Erratum to:J Zhejiang Univ-Sci C(ComputElectron)2014 15(7):551-563doi:10.1631/jzus.C1300320The original version of this article unfortunately contained mistakes.Algorithm 6 should be as follows:Algorithm 6 FGKFCM-F clustering Input:(1)X={x_1,x_2,…,x_N},,x_iR~d,i=1,2,…,N,the dataset;(2)C,1C≤N,the number of clusters;(3)ε0,the stopping criterion;