How to Make $T$-Transitive a Proximity Relation

Three ways to approximate a proximity relation $R$ (i.e., a reflexive and symmetric fuzzy relation) by a $T$ -transitive one where $T$ is a continuous Archimedean $t$-norm are given. The first one aggregates the transitive closure $overline{R}$ of $R$ with a (maximal) $T$-transitive relation $B$ contained in $R$ . The second one computes the closest homotecy of $overline{R}$ or $B$ to better fit their entries with the ones of $R$. The third method uses nonlinear programming techniques to obtain the best approximation with respect to the Euclidean distance for $T$ the $Lstrok$ukasiewicz or the product $t$-norm. The previous methods do not apply for the minimum $t$-norm. An algorithm to approximate a given proximity relation by a ${rm Min}$-transitive relation (a similarity) is given in the last section of the paper.      

$ {cal L}_{2}$ Gain of Periodic Linear Switched Systems: Fast Switching Behavior

We investigate the $ {cal L}_{2}$ gain of periodic linear switched systems under fast switching. For systems that possess a suitable notion of a time-average system, we characterize the relationship between the ${cal L}_{2}$ gain of the switched system and the ${cal L}_{2}$ gain of its induced time-average system when the switching rate is sufficiently fast. We show that the switched system ${cal L}_{2}$ gain is in general different from the average system ${cal L}_{2}$ gain if the input or output coefficient matrix switches. If only the state coefficient matrix switches, the input-output energy gain for a fixed ${cal L}_{2}$ input signal is bounded by the ${cal L}_{2}$ gain of the average system as the switching rate grows large. Additionally, for a fixed ${cal L}_{2}$ input, the maximum pointwise in time difference between the switched and average system outputs approaches zero as the switching rate grows.      

Decentralized $H_{infty }$ Filter Design for Discrete-Time Interconnected Fuzzy Systems

This paper describes a decentralized $H_{infty }$ filter design for discrete-time interconnected fuzzy systems based on piecewise-quadratic Lyapunov functions. The systems consist of $J$discrete-time interconnected Takagi–Sugeno (T–S) fuzzy subsystems, and a decentralized $H_infty$ filter is designed for each subsystem. It is shown that the stability of the overall filtering-error system with $H_{infty }$ performance can be established if a piecewise-quadratic Lyapunov function can be constructed. Moreover, the parameters of filters can be obtained by solving a set of linear matrix inequalities that are numerically feasible. Two simulation examples are given to show the effectiveness of the proposed approach.      

Simultaneous $H^{infty}$ Control for Nonlinear Systems

This note develops a novel method for designing simultaneous $H^{infty}$ state feedback controllers for a collection of single-input nonlinear systems. Based on the Kalman—Yakubovich—Popov Lemma, necessary and sufficient conditions for the existence of simultaneous $H^{infty}$ controllers are derived by the control storage function approach. A universal formula for constructing continuous, time-invariant, simultaneous $H^{infty}$ state feedback controllers is presented.      

6H-SiC JFETs for 450 $^{circ}hbox{C}$ Differential Sensing Applications

N-channel 6H-SiC depletion-mode junction field-effect transistors (JFETs) have been fabricated, and characterized for use in high-temperature differential sensing. Electrical characteristics of the JFETs have been measured and are in good agreement with predictions of an abrupt-junction long-channel JFET model. The electrical characteristics were measured across a 2-in wafer for temperatures from 25 $^{ circ}hbox{C}$ to 450 $^{circ}hbox{C}$, and the extracted pinchoff voltage has a mean of 11.3 V and a standard deviation of about 1.0 V at room temperature, whereas pinchoff current has a mean of 0.41 mA with standard deviation of about 0.1 mA. The change in pinchoff voltage is minimal across the measured temperature range, whereas pinchoff current at 450 $^{circ}hbox{C}$ is about half its value at room temperature, consistent with the expected change in the $nmu_{n}$ product. The characterization of differential pairs and hybrid amplifiers constructed using these differential pairs is also reported. A three-stage amplifier with passive loads has a differential voltage gain of 50 dB, and a unity-gain frequency of 200 kHz at 450 $^{circ}hbox{C}$, limited by test parasitics. A two-stage amplifier with active loads has reduced sensitivity to off-chip parasitics and exhibits a differential voltage gain of 69 dB with a unity-gain frequency of 1.3 MHz at 450 $^{circ}hbox{C}$.$hfill$[2009-0029]      

A ${bm lambda}$-Cut and Goal-Programming-Based Algorithm for Fuzzy-Linear Multiple-Objective Bilevel Optimization

Bilevel-programming techniques are developed to handle decentralized problems with two-level decision makers, which are leaders and followers, who may have more than one objective to achieve. This paper proposes a ${lambda}$-cut and goal-programming-based algorithm to solve fuzzy-linear multiple-objective bilevel (FLMOB) decision problems. First, based on the definition of a distance measure between two fuzzy vectors using ${lambda}$-cut, a fuzzy-linear bilevel goal (FLBG) model is formatted, and related theorems are proved. Then, using a ${lambda}$-cut for fuzzy coefficients and a goal-programming strategy for multiple objectives, a ${lambda}$-cut and goal-programming-based algorithm to solve FLMOB decision problems is presented. A case study for a newsboy problem is adopted to illustrate the application and executing procedure of this algorithm. Finally, experiments are carried out to discuss and analyze the performance of this algorithm.      

On the NP-Hardness of Checking Matrix Polytope Stability and Continuous-Time Switching Stability

Motivated by questions in robust control and switched linear dynamical systems, we consider the problem checking whether all convex combinations of $k$ matrices in $R^{n times n}$ are stable. In particular, we are interested whether there exist algorithms which can solve this problem in time polynomial in $n$ and $k$. We show that if $k= lceil n^{d} rceil $ for any fixed real $d>0$, then the problem is NP-hard, meaning that no polynomial-time algorithm in $n$ exists provided that $P ne NP$, a widely believed conjecture in computer science. On the other hand, when $k$ is a constant independent of $n$ , then it is known that the problem may be solved in polynomial time in $n$. Using these results and the method of measurable switching rules, we prove our main statement: verifying the absolute asymptotic stability of a continuous-time switched linear system with more than $n^{d}$ matrices $A_{i} in R^{n times n}$ satisfying $0 succeq A_{i} + A_{i}^{T}$ is NP-hard.      

Analytical Model of Valveless Micropumps

The flow driven by a valveless micropump with a single cylindrical pump chamber and two diffuser/nozzle elements is studied theoretically using a 1-D model. The pump cavity is driven at an angular frequency $omega$ so that its volume oscillates with an amplitude $V_{rm m}$. The presence of diffuser/nozzle elements with pressure-drop coefficients $zeta_{+}$, $zeta_{-}( ≫ zeta_{+})$ and throat cross-sectional area $A_{1}$ creates a rectified mean flow. In the absence of frictional forces the maximum mean volume flux (with zero pressure head) is $Q_{0}$ where $Q_{0}/V_{rm m}omega = (zeta_{-} -break zeta_{+})pi/16(zeta_{-}+zeta_{+})$, while the maximum pressure that can be overcome is $Delta P_{max}$ where $ Delta P_{max}A_{1}^{2}/V_{rm m}^{2} omega^{2} !=! (zeta_{-} -break zeta_{+})/16$. These analytical results agree with numerical calculations for the coupled system of equations and compare well with the experimental results of Stemme and Stemme.$hfill$ [2008-0244]      

${cal H}_{infty}$ State-Feedback Control Design for Fuzzy Systems Using Lyapunov Functions With Quadratic Dependence on Fuzzy Weighting Functions

This paper proposes a method for designing an ${cal H}_{infty}$ state-feedback fuzzy controller for discrete-time Takagi–Sugeno (T-S) fuzzy systems. To derive less conservative ${cal H}_{infty}$ stabilization conditions, this paper enhances the interactions among the fuzzy subsystems using a multiple Lyapunov function with quadratic dependence on fuzzy weighting functions. Besides, for more allocation of the nonlinearity to the fuzzy control system, this paper introduces a slack variable that is quadratically dependent on the one-step-past fuzzy weighting functions as well as the current ones. In the derivation, the ${cal H}_{infty}$ stabilization conditions are formulated in terms of parameterized linear matrix inequalities (PLMIs), which are reconverted into LMI conditions with the help of an efficient relaxation technique.      

Delay-Dependent $hbox{H}_{infty }$ Filter Design for Discrete-Time Fuzzy Systems With Time-Varying Delays

This paper investigates delay-dependent $hbox{H}_{bminfty }$ filter design problems for discrete-time fuzzy systems with time-varying delays. First, a novel delay-dependent piecewise Lyapunov–Krasovskii functional (DDPLKF) is proposed in which both the upper bound of delays and the delay interval are considered. Based on this DDPLKF, the delay-dependent stability criteria for discrete-time systems with constant or time-varying delays are obtained, respectively. Then, delay-dependent full-order and reduced-order $hbox{H}_{bminfty }$ filter design approaches are proposed. The filter parameters can be obtained by solving a set of linear matrix inequalities (LMIs). Simulation examples are also given to illustrate the performance of the proposed approaches. It is shown that our approaches are less conservative and that the corresponding $hbox{H}_{bminfty }$ filters can achieve better performance than the existing approaches.      

Stability Margins of Adaptive Control Architecture

This technical note presents the ${cal L}_{1}$ adaptive control architecture for systems in the presence of unknown high-frequency gain with known sign, time-varying unknown parameters and disturbances. The ${cal L}_{1}$ adaptive controller leads to uniform performance bounds for the system's input and output signals, which can be systematically improved by increasing the adaptation rate. For constant unknown parameters, this result leads to analytically computable time-delay margin of a semiglobal nature.      

${cal H}_{infty}$ Filtering of Discrete-Time Markov Jump Linear Systems Through Linear Matrix Inequalities

This technical note addresses the discrete-time Markov jump linear systems ${cal H}_{infty}$ filtering design problem. First, under the assumption that the Markov parameter is measurable, the main contribution is the linear matrix inequality (LMI) characterization of all linear filters such that the estimation error remains bounded by a given ${cal H}_{infty}$ norm level, yielding the complete solution of the mode-dependent filtering design problem. Based on this result, a robust filter design able to deal with polytopic uncertainty is considered. Second, from the same LMI characterization, a design procedure for mode-independent filtering is proposed. Some examples are solved for illustration and comparisons.      

Reflection Coefficients of Polynomials and Stable Polytopes

The geometry of stable discrete polynomials using their coefficients and reflection coefficients is investigated. Two linear Schur invariant transformations with a free parameter in the polynomial coefficient space are introduced. The first transformation ${cal R}^{n}times{cal R}rightarrow{cal R}^{n}$ maps an arbitrary stable polytope into another stable polytope. The second transformation ${cal R}^{n}times{cal R}rightarrow{cal R}^{n+1}$ maps a stable tilted $n$-dimensional hyperrectangle defined by the discrete Kharitonov theorem into a stable $(n+1)$- dimensional polytope.      

Post-CMOS-Compatible Aluminum Nitride Resonant MEMS Accelerometers

This paper describes the development of aluminum nitride (AlN) resonant accelerometers that can be integrated directly over foundry CMOS circuitry. Acceleration is measured by a change in resonant frequency of AlN double-ended tuning-fork (DETF) resonators. The DETF resonators and an attached proof mass are composed of a 1- $muhbox{m}$ -thick piezoelectric AlN layer. Utilizing piezoelectric coupling for the resonator drive and sense, DETFs at 890 kHz have been realized with quality factors $(Q)$ of 5090 and a maximum power handling of 1 $muhbox{W}$. The linear drive of the piezoelectric coupling reduces upconversion of $1/f$ amplifier noise into $1/f^{3}$ phase noise close to the oscillator carrier. This results in lower oscillator phase noise, $-$96 dBc/Hz at 100-Hz offset from the carrier, and improved sensor resolution when the DETF resonators are oscillated by the readout electronics. Attached to a 110-ng proof mass, the accelerometer microsystem has a measured sensitivity of 3.4 Hz/G and a resolution of 0.9 $hbox{mG}/surdhbox{Hz}$ from 10 to 200 Hz, where the accelerometer bandwidth is limited by the measurement setup. Theoretical calculations predict an upper limit on the accelerometer bandwidth of 1.4 kHz.$hfill$ [2008-0190]      

Piecewise $H_{infty}$ Controller Design of Uncertain Discrete-Time Fuzzy Systems With Time Delays

This paper considers the robust $H_{infty}$ control of uncertain discrete-time fuzzy systems with time delays based on piecewise Lyapunov--Krasovskii functionals. It is shown that the stability with $H_{infty}$ disturbance attenuation performance can be established for the closed-loop fuzzy control systems if there exists a piecewise Lyapunov--Krasovskii functional, and moreover, the functional and the corresponding controller can be obtained by solving a set of linear matrix inequalities that are numerically feasible. A numerical example is given to demonstrate the efficiency and the advantage of the proposed method.      

Real-Time Temperature Compensation of MEMS Oscillators Using an Integrated Micro-Oven and a Phase-Locked Loop

We present a new temperature compensation system for microresonator-based frequency references. It consists of a phase-locked loop (PLL) whose inputs are derived from two microresonators with different temperature coefficients of frequency. The resonators are suspended within an encapsulated cavity and are heated to a constant temperature by the PLL controller, thereby achieving active temperature compensation. We show repeated real-time measurements of three 1.2-MHz prototypes that achieve a frequency stability of $pm$ 1 ppm from $-20 ^{circ}hbox{C}$ to $+80 ^{circ}hbox{C}$, as well as a technique to reduce steady-state frequency errors to $pm$0.05 ppm using multipoint calibration.$hfill$[2009-0074]      

Serially Connected Weight-Balanced Digital Actuators for Wide-Range High-Precision Low-Voltage-Displacement Control

This paper presents the design, fabrication, and characterization of a new serial digital actuator, achieving an improvement in range-to-precision and range-to-voltage performance. We propose a weight-balanced design for the serial actuators with serpentine springs with a serial arrangement of unit digital actuators. We have measured the displacement range, precision, and drive voltage of unit and serial actuation at 1 Hz. The serial digital actuators produce a full-range displacement of $28.44 pm 0.02 muhbox{m}$ , accumulating unit displacements of $2.8 pm 0.5 muhbox{m}$ at an operating voltage of 4.47 $pm$ 0.07 V. In addition, the serial digital actuators that have a displacement precision of 37.94 $pm$ 6.26 nm do not accumulate the displacement errors of the unit actuators, i.e., 36.0 $pm$ 17.7 nm. We experimentally verify that the serial digital actuators achieve a range-to-squared-voltage ratio of 1.423 $muhbox{m/V}^{2}$ and a range-to-precision ratio of 749.6.$hfill$ [2009-0020]      

High-Voltage Dielectrophoretic and Magnetophoretic Hybrid Integrated Circuit/Microfluidic Chip

A hybrid integrated circuit (IC)/microfluidic chip is presented that independently and simultaneously traps and moves microscopic objects suspended in fluid using both electric and magnetic fields. This hybrid chip controls the location of dielectric objects, such as living cells and drops of fluid, on a 60 $times$ 61 array of pixels that are $30 times 38 mu hbox{m}^{2}$ in size, each of which can be individually addressed with a 50-V peak-to-peak dc-to-10-MHz radio-frequency voltage. These high-voltage pixels produce electric fields above the chip's surface with a magnitude $vert vec{E}vert approx 1 hbox{V}/muhbox{m}$ , resulting in strong dielectrophoresis (DEP) forces $vert vec{F}_{ rm DEP}vert approx 1 hbox{nN}$. Underneath the array of DEP pixels, there is a magnetic matrix that consists of two perpendicular sets of 60 metal wires running across the chip. Each wire can be sourced with 120 mA to trap and move magnetically susceptible objects using magnetophoresis. The DEP pixel array and magnetic matrix can be used simultaneously to apply forces to microscopic objects, such as living cells or lipid vesicles, that are tagged with magnetic nanoparticles. The capabilities of the hybrid IC/microfluidic chip demonstrated in this paper provide important building blocks for a platform for biological and chemical applications. $hfill$[2009-0142]      

Evanescent-Wave Spectroscopy Using an SU-8 Waveguide for Rapid Quantitative Detection of Biomolecules

A 30-mm-long multimode waveguide, 40 $muhbox{m}$ wide and 40 $muhbox{m}$ high, is fabricated on a silicon wafer using polymer SU-8 as the core and liquid buffer as the cladding. Antibodies are successfully immobilized on the SU-8 surface designated for binding target antigens dispersed in the buffer solution. Evanescent-wave spectroscopy is performed by exciting the fluorescently labeled antigens, bound to the waveguide surface within its evanescence field, and measuring the emission light intensity. This evanescent-wave biosensor detects specific molecular interaction. The optical output as a function of the antigen concentration can be described by Langmuir equation. Antigen concentration as low as 1.5 $muhbox{g}/hbox{mL}$ is detected; concentrations higher than 100 $muhbox{g}/hbox{mL}$ lead to sensor saturation. $hfill$[2008-0058]      

Discharge-Based Pressure Sensors for High-Temperature Applications Using Three-Dimensional and Planar Microstructures

Two versions of microdischarge-based pressure sensors, which operate by measuring the change, with pressure, in the spatial current distribution of pulsed dc microdischarges, are reported. The inherently high temperatures of the ions and electrons in the microdischarges make these devices amenable to high-temperature operation. The first sensor type uses 3-D arrays of horizontal bulk metal electrodes embedded in quartz substrates with electrode diameters of 1–2 mm and 50–100-$muhbox{m}$ interelectrode spacing. These devices were operated in nitrogen over a range of 10–2000 torr, at temperatures as high as 1000 $^{circ}hbox{C}$. The maximum measured sensitivity was 5420 ppm/torr at the low end of the dynamic range and 500 ppm/torr at the high end, while the temperature coefficient of sensitivity ranged from $-$925 to $-$550 ppm/K. Sensors of the second type use planar electrodes and have active areas as small as 0.13 $hbox{mm}^{2}$. These devices, when tested in a chemical sensing system flowing helium as a carrier gas, had a maximum sensitivity of 9800 ppm/torr, a dynamic range of 25–200 torr, and a temperature coefficient of sensitivity of approximately $-$1412 ppm/K.$hfill$ [2008-0262]