首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 109 毫秒
1.
针对中小型企业服务器高可用问题,本文提出和实现了纯软件双机热备的解决方案,并做了相应改进。在Ubuntu系统中安装Heartbeat、My SQL、Apache2三个开源软件,使其协同工作,充分发挥各软件的优势,最终在此基础上成功搭建高可用双机热备服务器。通过编写服务器软件Apache2的监听脚本,使服务器的鲁棒性有了明显的提高。该双机热备解决方案采用纯软件方式实现,在很大程度上降低了中小型企业因购买昂贵设备带来的压力。  相似文献   

2.
利用Heartbeat实现高可用集群系统   总被引:2,自引:0,他引:2  
该文介绍了高可用性集群系统的基本概念,讨论了开源Linux-HA项目下的Heartbeat的工作原理,提出了一种基于Linux的双机热备系统的方案.运行结果表明,该集群系统可以有效保证服务器业务的可靠运行.  相似文献   

3.
利用Heartbeat实现Linux上的双机热备份系统   总被引:12,自引:0,他引:12  
该文简要介绍了Heartbeat双机热备份软件的原理、使用以及对其的改进,为在Linux平台上实现高可靠性系统提供了一个性价比很高的解决方案。  相似文献   

4.
通过双机间的心跳通信,为基于DeviceNet现场总线的嵌入式控制器构建一个双机热备系统.文中详细阐述了控制器的双机热备策略,并对双机热备中的身份识别、备用机切入、双机扫描周期的同步、故障机切出和双机间通信做了详细介绍,最后对热备份软件进行了任务划分,给出了各任务的协同关系.实验测试中,双机运行稳定,能够发现故障快速实现双机切换,故障机恢复后能够重新切入组成双机系统.  相似文献   

5.
基于双机热备的控制计算机系统研究与实现   总被引:1,自引:0,他引:1  
可靠性是控制计算机系统的重要性能之一,它已经在很多应用领域成为衡量系统质量的一个重要指标。双机热备是提高系统可靠性的有效方法之一,介绍了双机热备的概念,研究对比了单机与双机热备系统的可靠性,给出了系统组成、工作原理及实现双机热备系统的关键技术。基于双机热备的控制计算机系统已经投入使用,在应用过程中效果良好。  相似文献   

6.
针对现有的煤矿监控系统双机热备方案存在存储设备投资费用高、可靠性相对较差、主机中断后恢复数据算法复杂等缺点,设计了基于纯软件模式的双机热备数据同步软件,该软件依据煤矿监控系统的实际应用情况,将监控数据同步功能从双机热备系统中独立出来,形成一个独立的软件,降低了双机热备同步算法和同步内容的复杂度,提高了双机热备的可靠性。  相似文献   

7.
防火墙是位于网络边界防范网络攻击的屏障,是与不可信网络进行联络的唯一纽带。防火墙系统的可靠性直接关系着整个受保护网络的可用性,所以必须利用相关技术为它提供数据通道的冗余。利用开源的高可用集群软件Heartbeat或者UCARP软件可以实现防火墙系统的双机热备,提供多节点冗余。  相似文献   

8.
本文介绍了双机热备对提高系统可靠性和可用性方面的重要作用,通过对实现双机热备系统的几个方案的比较选择,提出了基于证券业应用背景的应用级双机热备方案,并就此方案的具体设计思路进行了讨论.  相似文献   

9.
本文介绍了双机热备对提高系统可靠性和可用性方面的重要作用.通过对实现双机热备系统的几个方案的比较选择,提出了基于证券业应用背景的应用级双机热备方案,并就此方案的具体设计思路进行了讨论。  相似文献   

10.
基于Linux的双机热备系统设计   总被引:1,自引:0,他引:1  
研究了双机热备技术,并创新性地运用双机热备技术设计了一个安全、实时的热备linux系统.通过双机热备技术在系统中的应用,提高了系统运行的安全性、稳定性,确保工作的正常运行.  相似文献   

11.
高可用性已经成为服务器解决方案的关键。详细介绍各种高可用性系统(比如热备份系统,及群系统)的概况以及它们各自的优缺点,并给出了一个基于Linux的双机热备份高可用性系统(SBOLHA),系统采用的进程迁移技术保证了主备系统间的平滑切换。  相似文献   

12.
介绍了心跳传输机制和iSCSI协议的原理和实现。以成熟的开源软件Hearbeat和 UNH iSCSI软件为基础,在Linux操作系统平台上设计和实现了一套在广域网下基于iSCSI技术的高可用存储解决方案,从而为中小企业关键业务提供经济、高可用的存储服务。  相似文献   

13.
随着新的应用不断出现业务量的增大,许多企业(政务)网的网络核心部分及主干链路数据流量和处理强度较大,保证关键LAN段可靠性和可用性很重要,应用热备份路由协议(HSRP)和链路聚合技术,实现基于虚拟局域网(VLAN)的热备份路由、负载均衡及干道的链路容错,并提出了相应的实现方案。  相似文献   

14.
We classify standby redundancy design space in process-control programs into the following three categories: cold standby, warm standby, and hot standby. Design parameters of warm standby are identified and the reliability of a system using warm standby is evaluated and compared with that of hot standby. Our analysis indicates that the warm standby scheme is particularly suitable for long-lived unmaintainable systems, especially those operating in harsh environments where burst hardware failures are possible. The feasibility of warm standby is demonstrated with a simulated chemical batch reactor system  相似文献   

15.
双机热备系统中数据的及时同步在很大程度上影响系统的性能。针对传统双机热备系统中数据复制的连续性以及检索更新文件时间长的不足,提出了基于链路延迟的文件复制和基于单向哈希函数的更新文件检索。通过对这两种方法的分析,说明该改善在很大程度上提高了双机对等节点间数据同步的效率。  相似文献   

16.
双机热备份技术是目前主流应用的服务器容错技术的一种,具有安装简单,稳定的特点.但双机热备方案对硬件要求高,一般均需要磁盘柜或磁带机方能制定双机热备的方案,纯软热备也需要大量资金购买热备软件,从而导致热备方案成本很高.作者在长期的运行维护期间,依据所在单位服务器备份数据的现状,经过大量的实践操作,探索出另一种纯软件热备份的零成本方案.  相似文献   

17.
Warm standby redundancy is an important fault-tolerant design technique for improving the reliability of many systems used in life-critical or mission-critical applications. Traditional warm standby models aim to reduce the operational cost and failure rate of the standby elements by keeping them partially powered and partially exposed to operational stresses. However, depending on the level of readiness of a standby element, significant restoration delays and replacement costs can be incurred when the standby element is needed to replace the failed online element. To achieve a balance between the operation cost of standby elements and the replacement costs, this paper proposes a new warm standby model with scheduled (or time-based) standby mode transfer of standby elements. In particular, each standby element can be transferred from warm standby mode to hot standby mode (a mode in which the standby element is ready to take over at any time) at a fixed/predetermined time instants after the mission starts. To facilitate the optimal design and implementation of the proposed model, this paper first suggests a new algorithm for evaluating the reliability and expected mission cost of 1-out-of-N: G system with standby elements subject to the time-based standby mode transfer. The algorithm is based on a discrete approximation of time-to-failure distributions of the elements and can work with any type of distributions. Based on the suggested algorithm the problem of optimizing transfer times of standby elements to the hot standby mode and optimal sequencing of their transfer to the operation mode is formulated and solved. In this problem the expected mission cost associated with elements’ standby and operation expenses and mode transfer expenses is minimized subject to system reliability constraint. Illustrative examples are provided.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号