一类具有未知死区MIMO系统的自适应模糊控制

针对一类具有未知死区并具有下三角函数控制增益矩阵的不确定MIMO非线性系统, 根据滑模控制原理, 并利用Nussbaum函数的性质, 提出了一种自适应模糊控制器的设计方案. 该方案取消了函数控制增益符号已知和死区模型参数上界、下界已知的条件. 通过引入积分型李亚普诺夫函数及最优逼近误差与死区扰动上界的自适应补偿项，证明了闭环系统是稳定的，跟踪误差收敛到零. 仿真结果表明了该方法的有效性.     

具有未知非线性死区的自适应模糊控制

基于滑模控制原理，利用模糊系统的逼近能力，提出一种自适应模糊控制方法．该方法提出一种简化非线性死区输入模型，取消了非线性死区输入模型的倾斜度相等以及死区边界对称的条件，还取消了非线性死区输入模型各种参数已知的条件．该方法通过引入逼近误差的自适应补偿项来消除建模误差和参数估计误差的影响．理论分析证明了闭环系统是半全局一致终结有界，跟踪误差收敛到零．仿真结果表明了该方案的有效性．     

带有未知虚拟控制增益符号的自适应输出反馈控制

针对带有未知虚拟控制增益符号的一类非线性系统。采用基于参数的坐标变换和参数重定义。将该系统转化为参数输出反馈形式。从而将未知的虚拟控制增益归入高频控制增益中．由于该高频控制增益符号未知。将Nussbaum增益技术融入自适应Backstepping方法中设计自适应输出反馈控制器．采用调节函数法设计参数自适应律以避免过参数估计．该方法所设计的自适应输出反馈控制器可确保闭环系统的所有信号一致有界。且跟踪误差渐近收敛．仿真研究表明了该设计方法的有效性．     

具有饱和死区非线性输入的自适应滑模跟踪控制

针对一类具有非对称饱和死区的扇区非线性输入系统,研究了自适应滑模输出反馈跟踪控制问题．在假设系统数学模型已知或未知的情形下,分别基于自适应观测器和模糊观测器,提出了滑模控制器的综合设计方案,并通过定义一类李亚普诺夫函数给出了自适应控制器和模糊逻辑系统的参数调整律．所提方法不仅具有对系统模型依赖性小的优点,而且增强了对扰动的鲁棒性,并保证了整个闭环跟踪误差系统的稳定性．最后,仿真结果验证了本方法的有效性．     

控制增益符号未知的MIMO时滞系统自适应控制

针对一类带有死区模型并具有未知函数控制增益的不确定MIMO非线性时滞系统,基于滑模控制原理和Nussbaum函数的性质,提出了一种稳定的自适应神经网络控制方案.该方案放宽了对函数控制增益上界为未知常数的假设,并通过使用Lyapunov-Krasovskii泛函抵消了因未知时变时滞带来的系统不确定性.理论分析证明,闭环系统是半全局一致终结有界.仿真结果表明了该方法的有效性.     

控制增益符号未知的不确定非线性系统鲁棒自适应控制

针对一类控制增益函数及符号均未知的不确定非线性系统,基于反推滑模设计方法,提出一种鲁棒自适应神经网络控制方案.结合Nussbaum增益设计技术和神经网络逼近能力,取消了控制增益函数及符号已知的条件,应用积分型Lyapunov函数避免了控制器奇异性问题,并通过引入神经网络逼近误差和不确定干扰上界的自适应补偿项消除了建模误差和不确定干扰的影响.理论分析证明了闭环系统所有信号半全局一致终结有界,仿真结果验证了该方法的有效性.     

一种新的非线性离散时间系统的模糊辨识方法

对一类非线性离散时间系统提出一种新的模糊的辨识方法。该方法在假设逼近误差界已知的情况下,基于死区函数对模糊逻辑系统中的未知参数设计自适应学习律;在逼近误差界未知的情况下,基于时变死区函数对模糊逻辑系统中的未知参数设计自适应学习律,并对时变死区进行自适应调节。证明了所设计的自适应学习律均可使辨识误差收敛到原点的一个小邻域内。仿真结果表明了该算法的有效性。     

带有摄动死区输入的未知非线性系统自适应模糊控制

用自适应模糊控制来实现对带有摄动死区输入的一类未知非线性系统的控制. 文中给出了一种新的死区执行器模型, 该模型含有时变并且摄动的执行增益. 通过将死区非线性分解为一个线性类似项, 一个非线性项和一个扰动类似项降低了扰动类似项的上界, 从而可以用更小的控制力度来实现系统的鲁棒性. 利用反步后推技术与非线性参数化的模糊逼近器结合导出控制器, 该设计取消了模糊基函数须事先已知的限制. 本文不仅从理论上证明了所给控制器能够保证闭环系统的稳定性和预期的跟踪性能, 还用仿真实验验证了控制器的有效性.     

基于终端滑模的机械手鲁棒自适应控制

对于不确定的机械手系统,提出一种鲁棒自适应控制方法,用自适应控制来估计系统的未知参数,用终端滑模控制来减少不确定因素的影响,为了避免因干扰的存在使自适应的估计参数发生漂移,引入死区自适应控制．仿真表明,滑模控制不仅抑制了误差,而且消除了死区自适应算法的局限性,该算法在取得较好控制效果的同时,具有很强的鲁棒性．     

高频增益符号未知时的变结构模型参考自适应控制

解决了对象相对阶大于1、高频增益符号未知时的变结构模型参考自适应控制(VS-MRAC)问题．提出了一种基于监控函数的控制信号切换律, 证明只需要对首个辅助误差构造监控函数, 就可决定控制信号的切换时间；进而, 在监控函数的管理下, 控制信号经至多有限次切换后将停止切换, 闭环系统所有信号一致有界, 跟踪误差将收敛到一个残集内, 且该残集可通过减小某些设计参数而变得任意小．特别地, 我们证明, 若系统的某些初始条件为零, 则至多只需要一次切换．     

Bi-Objective Optimal Control Modification Adaptive Control for Systems with Input Uncertainty

This paper presents a new model-reference adaptive control method based on a bi-objective optimal control formulation for systems with input uncertainty. A parallel predictor model is constructed to relate the predictor error to the estimation error of the control effectiveness matrix. In this work, we develop an optimal control modification adaptive control approach that seeks to minimize a bi-objective linear quadratic cost function of both the tracking error norm and the predictor error norm simultaneously. The resulting adaptive laws for the parametric uncertainty and control effectiveness uncertainty are dependent on both the tracking error and the predictor error, while the adaptive laws for the feedback gain and command feedforward gain are only dependent on the tracking error. The optimal control modification term provides robustness to the adaptive laws naturally from the optimal control framework. Simulations demonstrate the effectiveness of the proposed adaptive control approach.      

Predefined-time control for Euler–Lagrange systems with model uncertainties and actuator faults

A novel adaptive predefined-time tracking control algorithm is proposed for the Euler–Lagrange systems (ELSs) with model uncertainties and actuator faults. Compared with traditional finite-time and fixed-time studies, the system output tracking error under the proposed predefined-time controller converges to a small neighborhood of zero in finite time, whose upper bound is exactly a design parameter in the control algorithm. For the uncertain model, radial-based function neural network (RBFNN) is utilized to approximate the continuous uncertain dynamics. To deal with the actuator faults, an adaptive control law is involved in the fault-tolerant controller. In order to achieve the predefined-time bounded, a novel predefined-time sliding mode surface is designed. It is proved that the tracking error vector trajectory of closed-loop system is semi-globally uniformly ultimately predefined-time bounded, and the upper bounds of both the system settling time and the corresponding output tracking error can be adjusted with a simple parameter. Simulation examples finally demonstrate the effectiveness of the proposed control algorithm.     

Adaptive neural control of MIMO nonlinear state time-varying delay systems with unknown dead-zones and gain signs

In this paper, adaptive neural control is proposed for a class of uncertain multi-input multi-output (MIMO) nonlinear state time-varying delay systems in a triangular control structure with unknown nonlinear dead-zones and gain signs. The design is based on the principle of sliding mode control and the use of Nussbaum-type functions in solving the problem of the completely unknown control directions. The unknown time-varying delays are compensated for using appropriate Lyapunov-Krasovskii functionals in the design. The approach removes the assumption of linear functions outside the deadband as an added contribution. By utilizing the integral Lyapunov function and introducing an adaptive compensation term for the upper bound of the residual and optimal approximation error as well as the dead-zone disturbance, the closed-loop control system is proved to be semi-globally uniformly ultimately bounded. Simulation results demonstrate the effectiveness of the approach.     

船舶航向控制的多滑模鲁棒自适应设计

针对带有未知虚拟控制增益和常参数不确定的非匹配不确定船舶航向非线性控制问题,设计了一种新的多滑模鲁棒自适应控制算法.该算法利用神经网络来逼近系统模型的不确定性;应用逐步递推的多滑模控制算法降低了控制器的复杂性;尤其是采用Nussbaum函数处理系统中符号未知的问题,避免了可能存在的控制器奇异值问题;然后借助Lyapunov稳定性分析方法,理论分析证明了所得闭环系统全局一致最终有界,且跟踪误差收敛到零.仿真试验结果表明,该方法具有较好的控制效果.     

Robust adaptive fuzzy control for a class of perturbed pure-feedback nonlinear systems

A new design scheme of direct adaptive fuzzy controller for a class of perturbed pure-feedback nonlinear systems is proposed. The design is based on backstepping and the approximation capability of the first type fuzzy systems. A continuous robust term is adopted to minify the influence of modeling errors or disturbances. By introducing the modified integral-type Lyapunov function, the approach is able to avoid the requirement of the upper bound of the first time derivation of the high frequency control gain. Through theoretical analysis, the closed-loop control system is proven to be semi-globally uniformly ultimately bounded, with tracking error converging to a residual set.     

A robust adaptive sliding-mode control for rigid robotic manipulators with arbitrary bounded input disturbances

In this paper, a robust adaptive sliding-mode control scheme for rigid robotic manipulators with arbitrary bounded input disturbances is proposed. It is shown that the prior knowledge on the upper bound of the norm of the input disturbance vector is not required in the sliding-mode controller design. An adaptive mechanism is introduced to estimate the upper bound of the norm of the input disturbance vector. The estimate is then used as a controller gain parameter to guarantee that the output tracking error asymptotically converges to zero and strong robustness with respect to bounded input disturbances can be obtained. A simulation example is given in support of the proposed control scheme.     

Robust adaptive fault-tolerant control for a class of uncertain nonlinear systems with multiple time delays

This study is concerned with the problem of robust adaptive fuzzy fault-tolerant control for a class of uncertain nonlinear systems with mismatching parameter uncertainties, external disturbances, multiple state time delays perturbations and actuator failures, which include loss of effectiveness, outage and stuck modes. A novel direct adaptive fuzzy tracking control scheme is developed to achieve the fault-tolerant control objective. First, by introducing a positive nonlinear control gain function, the effects of state time delays and actuator failures are effectively compensated. Then, a suitable fuzzy logic system (FLS), which is used to approximate the corresponding nonlinear function, is constructed to eliminate the influences on mismatched parameter uncertainty and external disturbance. Moreover, it is shown that all the closed-loop system signals are uniformly bounded and that the tracking error converges to a small neighborhood of the origin via Lyapunov–Krasovskii stability analysis. Finally, the proposed adaptive fuzzy fault-tolerant tracking design approach is illustrated on a two stage chemical reactor system with delayed recycle streams.     

带有死区输入和未建模动态的神经网络控制

针对一类具有死区非线性输入和未建模动态的非线性系统,提出一种自适应神经网络控制方法。该方法将后推技术和动态面技术结合,克服了计算复杂性问题,放宽了动态不确定性的假设,取消了神经网络逼近误差有界。借助中值定理和Young’s不等式,保证整个设计只需一个自适应参数,且控制增益只需存在一个上、下界。理论分析证明闭环系统所有信号半全局一致终结有界。仿真结果验证所提方案的有效性。