共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
使用任何红外温度计测温或测定物体表面的辐射热量等都直接与被测物体表面的发射率有关。当绝对温度一定时,发射率值越大,红外温度计显示值就越高。目前,确定物体表面的发射率几乎全是由有关手册查得或者取样在实验室测出。可是,实际上由于被测表面的状况不同,同一种材料的物体表面的发射率差异很大,因此,现场实际物体表面的发射率无法从手册中查得;采用现场取样的方法亦是不可能的。因此,我们研制了一种便携式智能化物体表面发射率测定仪,它能很好地解决上述难题,使红外温度计能准确测温。一、发射率的检测原理 相似文献
3.
4.
该文提出了一种以凸包为基础来表达物体表面近似轮廓模型的方法。通过对由各种方式所得的散乱点集进行预处理,然后进行凸包运算,求得物体表面轮廓极值点,再依据这些点进行物体表面的三维重建。该文以Visual C++6.0为开发平台,采用可视化类库VTK,对这一方法进行计算机仿真,取得了较为理想的效果。 相似文献
5.
基于数据场特征的直接体绘制方法 总被引:2,自引:0,他引:2
论文在数据点分类的基础上,采用不同的方式计算表面采样点和内部采样点的颜色,改进了物质单一的数据场的光线投射体绘制方法。对物体模型内部的各数据点,采用一种简单的颜色映射经验模型来求解,简化了数据场内部数据点颜色的计算,减少了计算量,提高了绘制效率。 相似文献
6.
基于数字近景摄影测量的若干关键技术研究 总被引:1,自引:1,他引:0
研究了基于数字近景摄影的空间点坐标的测量方法;首先在物体表面粘贴两类标记点,然后通过对标记点进行识别和检测来确定标志点的空间位置,同时,对相关的编码与识别、标记点的亚像素中心定位、照相机标定与空间定向、非编码点的自动匹配等关键技术进行了研究,最后,给出了检测实例并进行了精度验证;实验表明,该方法操作简单,检测范围大,可满足三维物体特别是大面积物体空间检测的需求。 相似文献
7.
基于双目的三维点云数据的获取与预处理 总被引:1,自引:0,他引:1
在计算机辅助几何设计、医学诊断、物体识别与定位等领域的应用需求下,三维点云数据的获取与处理技术受到越来越多的关注。现在有多种不同的方式可以获取现实世界中物体的三维点云数据,并对数据进行相应处理。为了能够很好地对三维数据点云进行前期的预处理,首先通过双目摄像机获取物体的三维点云,并采用八叉树法对点云数据进行相应的预处理,然后在逆向工程软件中描述出来,从逆向工程软件中可以看出得到的物体与实际物体比较接近,从而可以证明所获取的点云数据可以用来描述物体,并且点云数据的处理技术是可行的。 相似文献
8.
扫描激光线源技术检测金属表面缺陷位置实验研究 总被引:1,自引:0,他引:1
利用扫描激光线源(Scaing Laser Line Source,SLLS)技术,提出一种金属表面缺陷位置检测方法,并搭建实验平台,实验研究该检测方法对金属表面缺陷位置的检测效果。方法中利用扫描激光线源技术对样品表面进行扫查,在样品内部激发超声信号,采用双波混合干涉方法实现对激发信号的探测,根据激发的瑞利波和反射回波与缺陷位置的关系,确定激发点和探测点到缺陷的距离,从而确定缺陷的位置。实验研究中分别以线源位置和探测点位置为基点确定缺陷位置,结果表明以探测点位置确定缺陷位置时,定位相对误差为0.23%。 相似文献
9.
10.
11.
12.
本文对于金属切削这一生产过程中所出现的不稳定问题,利用频率特性法中的奈氏判据,对其进行分析,从而找出消除自激振荡和达到切削过程绝对稳定的条件 相似文献
13.
人体测量学并不是现代社会的产物。有着很长发展历史的人体比例理论中就包含了现代人体测量学的基本内容,尽管其还不够系统完整,但至少说明了在艺术创作中诞生的人体比例理论对现代人体测量学的影响。并随着时间的推移而不断的完善发展,为现代人体测量学的系统提出奠定了坚实的基础。 相似文献
14.
目的:解决在FLASH中导入声音的问题.方法:对FLASH不支持的声音格式采取音频压缩的方法.结果:可成功将压缩后的声音文件导入到FLASH中.结论:在FLASH中使用声音可以使FLASH动画具有良好的动画效果. 相似文献
15.
David Smith 《AI & Society》2003,17(1):1-11
The paper questions the ability of current university systems to respond appropriately to the complex demands of an Information
Economy. It argues that new relationships between creative subjects and technology require new thinking about the nature and
purpose of universities per se. In particular, attention is drawn to the growing involvement of the private sector in higher
education. It is argued that it may not be appropriate to think of the `university of the future' in terms of current public
sector and quasi public sector institutions, but rather in terms of an emporium, based on an international trade in educational
services, and with the `University' as we now understand it occupying the functions of licensing, quality assurance and cultural
custodianship.
Accepted: 25 June 2002 相似文献
16.
熊林 《数字社区&智能家居》2007,3(14):428-429
虚拟化技术是当今服务器技术的一个主流方向,也是一项在计算机领域具有革命性意义的技术.作为x86架构体系下虚拟化技术的领军者-VMware,在技术上有其独到之处.研究VMware的技术与应用,对探知其优秀的技术特点,了解其成熟的产品体系有着现实意义. 相似文献
17.
All titanium alloys are highly reactive in the molten condition and so are usually melted in a water-cooled copper crucible to avoid contamination using processes such as Induction Skull Melting (ISM). These provide only limited superheat which, coupled with the surface turbulence inherent in most conventional mould filling processes, results in entrainment defects such as bubbles in the castings. To overcome these problems, a novel tilt-casting process has been developed in which the mould is attached directly to the ISM crucible holding the melt and the two are then rotated together to achieve a tranquil transfer of the metal into the mould. From the modelling point of view, this process involves complex three-phase flow, heat transfer and solidification. In this paper, the development of a numerical model of the tilt-casting process is presented featuring several novel algorithm developments introduced into a general CFD package (PHYSICA) to model the complex dynamic interaction of the liquid metal and melting atmosphere. These developments relate to the front tracking and heat transfer representations and to a casting-specific adaptation of the turbulence model to account for an advancing solid front. Calculations have been performed for a 0.4 m long turbine blade cast in a titanium aluminide alloy using different mould designs. It is shown that the feeder/basin configuration has a crucial influence on the casting quality. The computational results are validated against actual castings and are used to support an experimental programme. Although fluid flow and heat transfer are inseparable in a casting, the emphasis in this paper will be on the fluid dynamics of mould filling and its influence on cast quality rather than heat transfer and solidification which has been reported elsewhere. 相似文献
18.
19.
杨革 《数字社区&智能家居》2006,(5):208-209
每一种媒体部有自身的长处,对某种特定的教学和学习有效。同样,每种媒体又不可避免地存在局限性,不利于某些教学和学习。因此,多媒体不是一种全能的媒体,也不可能代替传统媒体。现代媒体与传统媒体在教学中应相互补充,取长补短,相得益彰。 相似文献
20.
本文通过计量工作中用对等网实现多台微机电子秤的互联,实现数据的自动采集和共享,阐述了系统的硬件构成及软件设计,系统具有计量准确、快速、技术先进等特点,可大大提高工作效率,对企业实现计量管理网络化将起到有益的帮助。 相似文献