离散非线性系统的迭代学习轨迹跟踪鲁棒算法优化及应用

针对一类存在随机输入状态扰动、输出扰动及系统初值与给定期望值不严格一致的离散非线性重复系统,提出了一种P型开闭环鲁棒迭代学习轨迹跟踪控制算法．基于λ范数理论证明了算法的严格鲁棒稳定性,并通过多目标函数性能指标优化P型开闭环迭代学习控制律的增益矩阵参数,保证了优化算法下系统输出期望轨迹跟踪误差的单调收敛性,达到提高学习算法收敛速度和跟踪精度的目的．最后应用于二维运动移动机器人的实例仿真,验证了本文算法的可行性和有效性．     

非线性离散时间系统的最优终端迭代学习控制

仅利用系统的终端输出误差而不是整个输出轨迹,提出了一种最优终端迭代学习控制方法.控制信号可直接通过终点的误差信息进行更新.主要创新点在于控制器的设计和分析只利用系统量测的I/O数据而不需要关于系统模型的任何信息,并可实现沿迭代轴的单调收敛.在此意义上,所提出的控制器是数据驱动的无模型控制方法.严格的数学分析和仿真结果均表明了所提出方法的适用性和有效性.     

Basis functions and parameter optimisation in high-order iterative learning control

In this paper a new parameter-optimal high-order Iterative Learning Control (ILC) algorithms is proposed to extend the work of Owens and Feng [Parameter optimisation in iterative learning control. International Journal of Control 14(11), 1059-1069]. If the original plant is positive, this new algorithm will result in convergent learning where the convergence is monotonic to zero tracking error. If the original plant is not positive, it can be shown that by adding a suitable set of basis functions into the algorithm, the tracking error will again converge monotonically to zero. This provides a considerable improvement to earlier work on parameter-optimal ILC as it opens up the possibility of globally convergent algorithms for any linear plant G. The number of parameters needed to ensure convergence could, however, become large. The paper shows that the use of low-order parameterisations is capable of achieving much of the benefit achieved in the ‘ideal’ case.     

Monotonic convergence of iterative learning control systems with variable pass length

A growing number of researchers consider iterative learning control (ILC) a promising tool for numerous control problems in biomedical application systems. We will briefly discuss why classical ILC theory is technically too restrictive for some of these applications. Subsequently, we will extend the classical ILC design in the lifted systems framework to the class of repetitive trajectory tracking tasks with variable pass length. We will analyse the closed-loop dynamics for two standard learning laws, and we will discuss in which sense the tracking error can be reduced by which controller design strategies. Necessary and sufficient conditions for monotonic convergence will be derived. We then summarise all results in a set of practical controller design guidelines. Finally, a simulation study is presented, which demonstrates the usefulness of these guidelines and illustrates the special dynamics that occur in variable pass length learning.     

数据丢失对迭代学习控制的影响分析

针对一类线性系统,分析数据丢失对迭代学习控制算法的影响.首先基于lifting方法给出跟踪误差渐近收敛和单调收敛的条件,并分析收敛速度与数据丢失率的关系,结果表明收敛速度随着数据丢失程度的增加而变慢.其次,为抑制迭代变化扰动的影响,给出一种存在数据丢失时的鲁棒迭代学习控制器设计方法,并将控制器设计问题转化为求取线性矩阵不等式的可行解.仿真示例验证了理论分析的结果以及鲁棒迭代学习控制算法的有效性.

     

Conditional learning control for alignment initial condition

This article tries to handle the alignment initial condition for contraction mapping based iterative learning control, such that the system can operate continuously without any initial condition reset. This goal is achieved for a class of nonlinear systems through the proposed conditional learning control, which has several advantages over the alternative method, adaptive learning control. The conditional learning control guarantees that sufficient knowledge can be learned to update the input and achieve perfect output tracking, despite the non-identical initial conditions. The sufficient conditions of either monotonic or strictly monotonic convergence of the input sequence, and the choice of learning gains are given. The performance of the proposed method is illustrated by simulated examples.     

基于时变终端滑模的任意迭代初态抑制控制EI北大核心CSCD

为解决迭代学习过程中的任意迭代初值和迭代收敛理论证明难的问题,本文构造了一种轨迹跟踪误差初值恒位于滑模面内的时变终端滑模面,将轨迹跟踪误差初值不为零的轨迹跟踪控制问题转换为滑模面初值恒为零的滑模面跟踪控制问题,建立了任意迭代初值与相同迭代初值的迭代学习控制理论连接桥梁.本文提出一种基于时变滑模面的比例–积分–微分(PID)型闭环迭代学习控制策略,基于压缩映射原理证明了迭代学习的收敛性,给出了迭代收敛条件.时变终端滑模面经有限次迭代学习收敛到零,达到轨迹跟踪误差最终稳定在时变滑模面内的目的;Lyapunov稳定理论证明了位于滑模面内的轨迹跟踪误差在有限时间内收敛到原点,达到轨迹局部精确跟踪目的.随机初态下的工业机器人轨迹跟踪控制数值仿真验证了本文方法的有效性和系统对外部强干扰的鲁棒性.     

Closed-loop P-type Iterative Learning Control of Uncertain Linear Distributed Parameter Systems

An iterative learning control problem for a class of uncertain linear parabolic distributed parameter systems is discussed, which covers many processes such as heat and mass transfer, convection diffusion and transport. Under condition of allowing system state initially to have error in the iterative process a closed-loop P-type iterative learning algorithm is presented, and the sufficient condition of tracking error convergence in L2 norm is given. Next, the convergence of the tracking error in L2 and W1,2 space is proved by using Gronwall-Bellman inequality and Sobolev inequality. In the end, a numerical example is given to illustrate the effectiveness of the proposed method.      

正则系统在Lebesgue-p范数意义下的快速迭代学习控制

针对一类线性正则系统,传统迭代学习控制算法收敛速度较低的问题,设计了一种快速迭代学习控制算法。该算法在传统P型迭代学习控制算法基础上,增加了由相邻两次迭代时跟踪误差构成的上一次差分信号和当前差分信号,并在Lebesgue-p范数度量意义下,利用卷积推广的Young不等式严格证明了,当迭代次数趋于无穷大时,系统的跟踪误差收敛于零,并给出了算法的收敛条件。该算法与传统P型迭代学习控制算法相比,不仅提高了收敛速度,而且还避免了采用λ范数度量跟踪误差的缺陷,最后通过仿真结果进一步验证了所提算法的有效性。     

Modelling of non-minimum phase effects in discrete-time norm optimal iterative learning control

The subject of this article is the modelling of the influence of non-minimum phase discrete-time system dynamics on the performance of norm optimal iterative learning control (NOILC) algorithms with the intent of explaining the observed phenomenon and predicting its primary characteristics. It is established that performance in the presence of one or more non-minimum phase plant zeros typically has two phases. These consist of an initial fast monotonic reduction of the L ₂ error norm (mean square error) followed by a very slow asymptotic convergence. Although the norm of the tracking error does eventually converge to zero, the practical implications over a finite number of trials is apparent convergence to a non-zero error. The source of this slow convergence is identified using the singular value distribution of the system's all pass component. A predictive model of the onset of slow convergence behaviour is developed as a set of linear constraints and shown to be valid when the iteration time interval is sufficiently long. The results provide a good prediction of the magnitude of error norm where slow convergence begins. Formulae for this norm and associated error time series are obtained for single-input single-output systems with several non-minimum phase zeros outside the unit circle using Lagrangian techniques. Numerical simulations are given to confirm the validity of the analysis.