基于SVR的传感器Hammerstein模型辨识

提出一种基于支持向量回归机的非线性动态传感器Hammerstein模型辨识方法并给出了相关的数学理论及学习算法.在该模型中,用非线性静态子环节和线性动态子环节串联来描述传感器的非线性动态特性.再利用函数展开将模型的非线性传递函数转换为等价的线性中间模型,并通过SVR求取中间模型参数.最后,推导出中间模型参数与传感器Hammerstein模型参数之间的关系,并由该关系实现非线性静态环节和线性动态环节的同时辨识.用实际力传感器动态标定实验数据进行测试,结果表明与常规非线性传感器辨识方法不同,所提方法只需进行一次动态标定实验就能给出非线性动态模型的数学解析表达式.且建立的力传感器Hammerstein模型阶次为4,而线性动态系统模型则需要6阶才能达到相同的精度.因此该研究为传感器非线性动态系统辨识又提供了一种可选方法.     

非线性动态系统的Wiener神经网络辨识法

提出了一种新的Wiener神经网络结构并将其应用于非线性动态系统辨识问题.首先,用Wiener模型对非线性动态系统进行描述,将其分解成线性动态子环节串接非线性静态增益的形式.其次,设计一种新型的神经网络结构,使网络权值对应于相应的Wiener模型参数;并推导了基于反向传播的网络权值调整方法.最后,通过网络迭代训练,可同时得到线性动态子环节和非线性静态增益的模型参数.通过一个Wiener模型的数值仿真来验证方法的有效性,仿真结果表明所提辨识方法切实可行.     

风洞系统非线性块状结构模型

本文将非线性块状模型的建模思想引入风洞系统模型的建立过程中,针对主排气阀和栅指电液伺服机构具有死区非线性特性,分别用含有死区输入的Hammerstein块状模型描述其动态特性,将主排气阀和栅指机构的输出作为风洞流场的输入,建立两输入两输出多变量耦合动态模型.两个独立的Hammerstein子模型与线性动态耦合的风洞流场模型串联构成一个非线性多变量块状模型.采用自适应加权递推辨识算法在线辨识Hammerstein子模型参数,采用带有遗忘因子的递推最小二乘法辨识风洞流场模型参数.仿真与风洞现场测试结果验证了本文方法的有效性.     

Identification of block-oriented nonlinear systems using orthonormal bases

In this paper, new noniterative algorithms for the identification of (multivariable) block-oriented nonlinear models consisting of the interconnection of linear time invariant systems and static nonlinearities are presented. The proposed algorithms are numerically robust, since they are based only on least squares estimation and singular value decomposition. Two different block-oriented nonlinear models are considered in this paper, viz., the Hammerstein model, and the Wiener model. For the Hammerstein model, the proposed algorithm provides consistent estimates even in the presence of colored output noise, under weak assumptions on the persistency of excitation of the inputs. For the Wiener model, consistency of the estimates can only be guaranteed in the noise free case. Key in the derivation of the results is the use of basis functions for the representation of the linear and nonlinear parts of the models. The performance of the proposed identification algorithms is illustrated through simulation examples of two benchmark problems drawn from the process control literature, viz., a binary distillation column and a pH neutralization process.     

非线性动态传感器系统的H模型神经网络辨识

针对非线性动态传感器模型辨识问题,提出一种新的Hammerstein模型神经网络结构辨识法。非线性动态传感器系统采用Hammerstein模型描述,将系统分解为非线性静态增益串接线性动态环节。再设计一种网络权系数对应于相应的Hammerstein模型参数的新型神经网络结构,推导了基于反向传播的网络权系数调整方法。通过网络迭代训练同时得到静态与动态两个环节的模型参数。最后通过一个H模型的数值仿真来验证方法的有效性,仿真结果表明所提辨识方法是有效的。     

Fixed point iteration in identifying bilinear models

Inspired by fixed point theory, an iterative algorithm is proposed to identify bilinear models recursively in this paper. It is shown that the resulting iteration is a contraction mapping on a metric space when the number of input–output data points approaches infinity. This ensures the existence and uniqueness of a fixed point of the iterated function sequence and therefore the convergence of the iteration. As an application, one class of block-oriented systems represented by a cascade of a dynamic linear (L), a static nonlinear (N) and a dynamic linear (L) subsystems is illustrated. This gives a solution to the long-standing convergence problem of iteratively identifying LNL (Winer–Hammerstein) models. In addition, we extend the static nonlinear function (N) to a nonparametric model represented by using kernel machine.     

基于遗传规划的哈默斯坦模型的辨识

该文基于遗传规划提出了一种辨识哈默斯坦模型的新方法。哈默斯坦模型由静态非线性模块和动态线性模块串联而成,因此系统辨识的目标是要找到非线性和线性模块的最优数学模型。该文通过遗传规划确定非线性模块的函数结构,并结合遗传算法确定模型的未知参数,适应度值的计算采用了最小信息量准则(A IC),以平衡模型的复杂度和精确度。该方法不需要对模型的先验知识有详细了解,就能达到较好的辨识效果,并且能够克服观测噪声的污染,获得参数的无偏估计。仿真结果说明了该方法的有效性。     

System identification by operatorial cancellation of nonlinear terms and application to a class of Volterra models

In this paper, a method is proposed for the identification of some SISO nonlinear models with two ill‐known components of different nature: a linear (possibly dynamic) part and a static nonlinear one. This method is well adapted when no a priori information is available about the nonlinear component to be identified. It is based on a difference operator, which enables to cancel the nonlinear term when applied to the model. Only the ill‐known linear part remains in the transformed model; it can therefore be identified independently of the nonlinear term. Based on the identified linear component, we have access to a pseudograph of the nonlinear term, whose shape can give precious information for the parameterization of the unknown nonlinear part and its identification. The identification model under consideration is defined in an abstract framework, with very weak hypotheses, so that the proposed approach has a large scope. To highlight the method, a class of dynamic Volterra models including some hybrid models such as dynamic inclusions is considered for application. Copyright © 2016 John Wiley & Sons, Ltd.     

Identification of nonlinear systems using a piecewise-linear Hammerstein model

In the paper a method for nonlinear system identification is proposed. It is based on a piecewise-linear Hammerstein model, which is linear in the parameters. The model and the identification algorithm are adapted to allow the parameter identification in the presence of a special form of the excitation signal. The identification method is derived from a recursive least-squares algorithm, which is properly adapted to take into account the proposed model structure and the properties of the identification signal. The applicability of the approach is illustrated by an example in which a discontinuous nonlinear static function is connected to a dynamic block.     

一种动态非线性模型传感器的辨识和补偿方法

针对利用Wiener模型表达的具有动态非线性的传感器进行系统辨识和性能补偿。将系统分解为动态非线性环节和静态线性环节,利用函数链人工神经网络和遗传算法分别进行系统辨识,通过静态非线性补偿将系统简化为线性系统,再进行动态性能补偿。利用LabVIEW设计虚拟仪器,经过仿真表明该方法是有效的。     

限定记忆法辨识带钢热镀锌退火炉模型参数

最小二乘参数估计方法可用于线性的或非线性的系统参数辨识,包括动态的、静态的和参数的或非参数的模型辨识,其递推算法更是收敛可靠,简单实用。但是随着数据的不断增长,最小二乘的递推算法将失去修正能力,出现数据饱和现象,限定记忆最小二乘法解决了这一问题,并能得到无偏、一致、有效估计。以已建立的连续带钢热镀锌退火炉数学模型为实例,用限定记忆最小二乘法辨识连续带钢热镀锌退火炉模型参数。通过对限定记忆最小二乘法的研究,进行模型参数辨识,并给出辨识结果和分析,结果证明了该方法的优越性。     

Estimation of an N-L-N Hammerstein-Wiener model

Estimation of a single-input single-output block-oriented model is studied. The model consists of a linear block embedded between two static nonlinear gains. Hence, it is called N-L-N Hammerstein-Wiener model. First, the model structure is motivated and the disturbance model is discussed. The paper then concentrates on parameter estimation. A relaxation iteration scheme is proposed by making use of a model structure in which the error is bilinear-in-parameters. This leads to a simple algorithm which minimizes the original loss function. The convergence and consistency of the algorithm are studied. In order to reduce the variance error, the obtained linear model is further reduced using frequency weighted model reduction. Simulation study will be used to illustrate the method.     

Adaptive discrete-time sliding-mode control of nonlinear systems described by Wiener models

In this paper, we propose an adaptive control scheme that can be applied to nonlinear systems with unknown parameters. The considered class of nonlinear systems is described by the block-oriented models, specifically, the Wiener models. These models consist of dynamic linear blocks in series with static nonlinear blocks. The proposed adaptive control method is based on the inverse of the nonlinear function block and on the discrete-time sliding-mode controller. The parameters adaptation are performed using a new recursive parametric estimation algorithm. This algorithm is developed using the adjustable model method and the least squares technique. A recursive least squares (RLS) algorithm is used to estimate the inverse nonlinear function. A time-varying gain is proposed, in the discrete-time sliding mode controller, to reduce the chattering problem. The stability of the closed-loop nonlinear system, with the proposed adaptive control scheme, has been proved. An application to a pH neutralisation process has been carried out and the simulation results clearly show the effectiveness of the proposed adaptive control scheme.     

基于非线性自回归时序模型的振动系统辨识

针对线性和弱非线性振动系统进行了研究,提出采用非线性自回归时序(GNAR)模型进行系统频率辨识和判断系统性或非线性基本特征的方法。首先根据摄动法求解非线性微分方程的理论,论证GNAR模型与线性和弱非线性系统之间的本质联系,推导出GNAR模型系数与线性和非线性系统频率之间的解析关系,然后给出由GNAR模型系数和结构判断系统是否存在非线性,及辨识系统频率和非线性项基本特征的方法。最后,以单自由度线性振动系统和无阻尼Duffing振动系统为算例验证该辨识方法的有效性和准确性。实验结果表明,基于GNAR模型的振动系统基本特征辨识方法具有较好的识别精度,能用于估计系统的动力学特性。     

Identification Scheme for Fractional Hammerstein Models With the Delayed Haar Wavelet

The parameter identification of a nonlinear Hammerstein-type process is likely to be complex and challenging due to the existence of significant nonlinearity at the input side. In this paper, a new parameter identification strategy for a block-oriented Hammerstein process is proposed using the Haar wavelet operational matrix(HWOM). To determine all the parameters in the Hammerstein model, a special input excitation is utilized to separate the identification problem of the linear subsystem from the complete nonlinear process. During the first test period, a simple step response data is utilized to estimate the linear subsystem dynamics. Then, the overall system response to sinusoidal input is used to estimate nonlinearity in the process. A single-pole fractional order transfer function with time delay is used to model the linear subsystem. In order to reduce the mathematical complexity resulting from the fractional derivatives of signals, a HWOM based algebraic approach is developed. The proposed method is proven to be simple and robust in the presence of measurement noises. The numerical study illustrates the efficiency of the proposed modeling technique through four different nonlinear processes and results are compared with existing methods.     

基于SVR的非线性动态系统建模方法研究

提出一种基于支持向量回归机(SVR)的非线性动态系统建模方法。用非线性静态子环节和线性动态子环节串联——Hammerstein模型来描述非线性动态系统。然后，通过函数展开将Hammerstein模型的非线性传递函数转换为等价的线性形式，从而建立起线性中间模型。再由SVR算法辨识出中间模型参数。最后，通过中间模型参数与Hammerstein模型参数之间的关系，实现原系统的非线性静态环节和线性动态环节的同时辨识。用非线性动态系统标定实验数据进行测试，建模结果表明所提方法具有如下优点：1)只需进行一次动态标定实验； 2)能给出非线性动态模型的数学解析表达式；3)充分利用SVR的优点，使所建模型具有更好的鲁棒性。该研究为非线性动态系统建模又提供了一种新方法。     

Support vector method for identification of Wiener models

Support vector regression is applied to identify nonlinear systems represented by Wiener models, consisting of a linear dynamic system in series with a static nonlinear block. The linear block is expanded in terms of basis functions, such as Laguerre or Kautz filters, and the static nonlinear block is determined using support vector machine regression.     

Measurement and identification of nonlinear systems consisting oflinear dynamic blocks and one static nonlinearity

This paper considers the measurement and the identification of nonlinear time-invariant single-input/single-output (SISO) systems, consisting of a multivariable linear dynamic system and one static nonlinear SISO system. This includes Wiener-Hammerstein systems in a linear feedback loop. The nonparametric identification of the frequency response functions of the linear parts are obtained without measuring the signals over the static nonlinearity. Measurements on an electronic circuit demonstrate the usability of this identification scheme