Crystal structure and spectroscopic studies of NaGd(PO3)4

Single crystals of gadolinium–sodium polyphosphate NaGd(PO₃)₄ were grown for the first time using a flux method and characterized by X-ray diffraction. This phosphate crystallizes in a monoclinic system with P2₁/n space group and with the following unit-cell dimensions: a = 9.767(3) Å, b = 13.017(1) Å, c = 7.160(2) Å, β = 90.564(5)°, V = 910.3(4) Å³ and Z = 4. The crystal structure was solved from 3451 X-ray independent reflections with final R(F²) = 0.0219 and R_w(F²) = 0.056 refined with 164 parameters (). The atomic arrangement can be described as a long chain polyphosphate organization. Two infinite (PO₃)∝ chains with a period of eight tetrahedra run along the [0 1 1] direction. The structure of NaGd(PO₃)₄ consists of GdO₈ polyhedra sharing oxygen atoms with phosphoric group PO₄. Each Na⁺ ion is bonded to eight oxygen atoms.     

Crystal structure, thermal analysis and IR spectroscopic investigation of (C6H9N2)H2XO4 (X = As, P)

Crystals of 2-amino-4-methylpyridinium dihydrogenmonoarsenate (C₆H₉N₂)H₂AsO₄ and 2-amino-4-methylpyridinium dihydrogenmonophosphate (C₆H₉N₂)H₂PO₄ have been prepared and grown at room temperature. These materials are isotypic with the following unit cell dimensions (C₆H₉N₂)H₂AsO₄: a = 12.4415(5) Å, b = 6.8224(3) Å, c = 11.3524(5) Å, Z = 4, V = 963.60(6) Å³; (C₆H₉N₂)H₂PO₄: a = 12.4410(9) Å, b = 6.7165(3) Å, c = 11.3417(5) Å, Z = 4, V = 925.09(10) Å³. The common space group is Pnma. The structure of these compounds has been determined by X-ray data collection on single crystals of (C₆H₉N₂)H₂AsO₄ and (C₆H₉N₂)H₂PO₄. Due to the strong hydrogen-bond network connecting the H₂XO₄ groups, the anionic arrangement must be described as a linear organization. The chains composed by the macroanion spread along the b-direction, approximately centered by x = 0 and 1/2. All atoms of the structure, except one oxygen atom, are located in the mirror planes situated at y = 1/4 and 3/4, imparting an internal mirror symmetry to the anionic and the cationic entities. The linear macroanions are crossed by organic cations lying in mirrors perpendicular to the b-direction; this atomic arrangement is then described by a three-dimensional network of hydrogen bonds, built up by two types, O–HO bonds inside the chains and N–HO bonds linking adjacent chains. The thermal properties of both compounds are investigated as well as the IR properties supported by group theoretical analyses.     

Crystal structure and characterization of [2,5-(CH3O)2C6H3NH3]4P4O12·2H2O

The preparation, crystal structure, TG–DTA analysis and spectroscopy investigation are reported for the 2,5-dimethoxy phenyl ammonium cyclotetraphosphate dihydrate [2,5-(CH₃O)₂C₆H₃NH₃]₄P₄O₁₂·2H₂O. This new compound is triclinic P with unit cell dimensions: a = 7.438(5) Å, b = 11.841(7) Å, c = 12.354(4) Å,  = 96.61(4)°, β = 98.35(4)°, γ = 102.60(6)°, Z = 1 and V = 1038.0(1) Å³. Its crystal structure has been determined and refined to R = 0.049, with 5128 independant reflections. The structure can be described by rows of P₄O₁₂ ring anions along the a axis; between these rows are located the organic groups, connected to them by hydrogen bonds.     

Synthesis and crystal structure of [2-NH2-5-CH3C5H4N]4P4O12·6H2O

Chemical preparation, crystal structure, IR absorption and thermal analysis of a new cyclotetraphosphate [2-NH₂-5-CH₃C₅H₄N]₄P₄O₁₂·6H₂O are reported. This compound is triclinic P-1 with unit-cell parameters: a = 10.206(5), b = 11.778(1), c = 9.991(4) Å,  = 110.40(6), β = 117.74(6), γ = 86.41(3)°, V = 989.1(8) Å³, Z = 1, D_x = 1.445 g cm⁻³. The structure has been determined and refined to R = 0.034 and R_w = 0.044, using 3663 independent reflections. The ring anions and water molecules form layers spreading around (a, b + c) planes via OHO hydrogen bonds. Between them are anchored 2-amino-5-methylpyridium cations, which establish H-bonds to interconnect the different adjacent layers and so contribute to the cohesion of the three-dimensional network. Tautomerization of (C₆H₉N₂)⁺ groups was evidenced in the present structure.     

Synthesis, structure and luminescent properties of Lu(PO3)3

A new structural type of rare earth metaphosphate, Lu(PO₃)₃, was prepared from high-temperature solution, of which the crystal structure was solved in S.G. of Cc (No.9) and Z = 4 with unit cell dimensions of a = 13.972(3) Å, b = 6.6710(13) Å, c = 9.958(2) Å and β = 127.36(3)°. In Lu(PO₃)₃, [LuO₆] octahedra connect with the non-bridging oxygens on (PO₃)_n infinite zigzag chains that extended along c-axis. The VUV and X-ray excited luminescent properties of undoped and Ln³⁺ (Ln = Ce, Eu, Tb) doped samples were examined, from which the optical band gap was estimated to be 8.3 eV. Besides, in the undoped sample a STE emission within 320–480 nm was observed, which probably be related to oxygen defects. However, in the Lu(PO₃)₃:Ce sample the Ce³⁺ emission was weak and STE emission was totally quenched under hard X-ray excitation.     

Synthesis, structure refinement and characterization of tetrahydrated acid gadolinium diphosphate HGdP2O7·4H2O

Synthesis and single crystal structure are reported for a new gadolinium acid diphosphate tetrahydrate HGdP₂O₇·4H₂O. This salt crystallizes in the monoclinic system, space group P2₁/n, with the following unit-cell parameters: a = 6.6137(2) Å, b = 11.4954(4) Å, c = 11.377(4) Å, β = 87.53(2)° and Z = 4. Its crystal structure was refined to R = 0.0333 using 1783 reflections. The corresponding atomic arrangement can be described as an alternation of corrugated layers of monohydrogendiphosphate groups and GdO₈ polyhedra parallel to the () plane. The cohesion between the different diphosphoric groups is provided by strong hydrogen bonding involving the W4 water molecule.

IR and Raman spectra of HGdP₂O₇·4H₂O confirm the existence of the characteristic bands of diphosphate group in 980–700 cm⁻¹ area. The IR spectrum reveals also the characteristic bands of water molecules vibration (3600–3230 cm⁻¹) and acidic hydrogen ones (2340 cm⁻¹). TG and DTA investigations show that the dehydration of this salt occurs between 79 and 900 °C. It decomposes after dehydration into an amorphous phase. Gadolinium diphosphate Gd₄(P₂O₇)₃ was obtained by heating HGdP₂O₇·4H₂O in a static air furnace at 850 °C for 48 h.     

Growth, thermal and optical properties of Yb:GdYAl3(BO3)4 crystal

Single crystal of Yb:GdYAl₃(BO₃)₄(Yb:GdYAB) has been grown by the flux method. The structure of Yb:GdYAB crystal has been determined by X-ray diffraction analysis. The experiment show that the crystal has the same structure as that of YAl₃(BO₃)₄ crystal and its unit cell constants have been measured to be a = 9.30146 Å, c = 7.24164 Å, Vol = 542.59 Å³. The absorption and fluorescence spectrum of Yb:GdYAl₃(BO₃)₄ crystal have also been measured at room temperature. In the absorption spectra, there are two absorption bands at 938 nm and 974 nm, respectively, which is suitable for InGaAs diode laser pumping. In the fluorescence spectra, there are two fluorescence peaks at 992 and 1040 nm. The thermal properties of Yb:GdYAl₃(BO₃)₄ crystal have been studied for the first time. The thermal expansion coefficient along c-axis is almost 5.4 times larger than that along a-axis. The specific heat of the crystal has been measured to be 0.77 J/g °C at room temperature. The calculated thermal conductivity is 5.26 Wm⁻¹ K⁻¹ along a-direction.     

Alkoxide route to La0.5Sr0.5CoO3 epitaxial thin films on SrTiO3

An all alkoxide based sol–gel route was investigated for preparation of epitaxial La_0.5Sr_0.5CoO₃ (LSCO) films on 100 SrTiO₃ (STO) substrates. Films with 20–30 to 80–100 nm thickness were prepared by spin-coating 0.2–0.6 M (metal) solutions on the STO substrates and heat treatment to 800 °C at 2 °C min^− 1, 30 min, in air. The films were epitaxial with a cube-on-cube alignment and the LSCO cell was strained to match the STO substrate of 3.905 Å closely; a and b = 3.894 Å and 3.897 Å for the 20–30 and 80–100 nm films, respectively. The c-axis was compressed to 3.789 Å and 3.782 Å for the 20–30 and 80–100 nm films, respectively, which resulted in an almost unchanged cell volume as compared to polycrystalline film and nano-phase powders prepared in the same way. The SEM study showed mainly very smooth, featureless surfaces, but also some defects. A film prepared in the same way on an -Al₂O₃ substrate was dense and polycrystalline with crystallite sizes in the range 10–50 nm and gave cubic cell dimensions of a_c = 3.825 Å. The conductivity of the ca 30–40 nm thick polycrystalline film was 1.7 mΩcm, while the epitaxial 80–100 nm film had a conductivity of around 1.9 mΩcm.     

Rietveld refinement and spectroscopic studies of sodium lead fluoroapatite lacunaire synthesized by hydrothermal method

The structure of NaPb₉(PO₄)₆F(H₂O)_0.33, isostructural with apatite, was determined by X-ray powder diffraction methods and the result of Rietveld refinement is P6₃/m, a = 9.76396(8) Å and c = 7.27520(9) Å. The final refinement led to R_F = 5.4%, R_B = 6.6%. In the tunnel, the water molecule (O_w) and F⁻ ions appear to be located in 2b and 4e sites, with occupancies of 0.028(6) and 0.075(8), respectively. In the M(1) and M(2) sites the occupancies of Pb and Na are 0.282(3)/0.051(3) and 0.467(5)/0.033(5), respectively. The formula assigned to the compound is [Pb_3.38(4)Na_0.62(4)](1)[Pb_5.60(6)Na_0.40(6)](2)(PO₄)₆F_0.90(10)(H₂O)_0.33(7)□_0.77(17), where □ = vacancy. The assignment of the observed frequencies in the Raman and infrared spectra is discussed on the basis of a unit-cell group analysis and by comparison with fluor and chloroapatite analogs. The result of ³¹P and ²³Na magic angle spinning-nuclear magnetic resonance (MAS-NMR) spectroscopies confirmed the structural results.     

Crystal data and indirect optical transitions in Tl2InGaSe4 crystals

The room temperature crystal data and the optical properties of the Bridgman method grown Tl₂InGaSe₄ crystals are reported and discussed. The X-ray diffraction technique has revealed that Tl₂InGaSe₄ is a single phase crystal of monoclinic structure. The unit cell lattice parameters, which were recalculated from the X-ray data, are found to be a = 0.77244 nm, b = 0.64945 nm, c = 0.92205 nm and β = 95.03°. The temperature dependence of the optical band gap of Tl₂InGaSe₄ single crystal in the temperature region of 290–500 K has also been investigated. The absorption coefficient was calculated from the transmittance and reflectance data in the incident photon energy range of 1.60–2.10 eV. The absorption edge is observed to shift toward lower energy values as temperature increases. The fundamental absorption edge corresponds to indirect allowed transition energy gap of 1.86 eV that exhibited a temperature coefficient γ = −3.53 × 10⁻⁴ eV/K.     

Single crystal structure of a layered intercalating phosphate with features of two dimensions and H-bonds

A new organic phosphate of (8-HQDH)(H₂PO₄)·H₂O has been obtained by hydrothermal reaction. The crystal structure was determined with data: triclinic, space group P , a=6.541(1) Å, b=8.5909(8) Å, c=10.769(1) Å, =98.734(7)°, β=91.20(1)°, γ=97.91(1)°, V=591.9(1) ų, and Z=2. The (H₂PO₄)⁻ groups and H₂O molecules stack into sheets and 8-HQ cations fixed parallelly with each other to form an intercalating compound by H-bonds.     

CO-DEPOSITION OF FULLERENES AND SULFUR FROM DILUTED SOLUTION

A new method to synthesize fullerene and sulfur compounds has been developed. Using this method, C₆₀S₁₆ and C₇₀S₁₆ compounds were grown from dilute fullerene and sulfur toluene solution. Their atomic structures were analyzed by x-ray diffraction with the single crystal. The C₆₀S₁₆ crystal is C-centered monoclinic structure of a=2.0874 nm, b=2.1139 nm, c=1.05690 nm and β=111.93°, and the C₇₀S₁₆ has a primitive monoclinic, P2₁/c, with lattice parameters of a=1.5271 nm, b=1.49971 nm, c=2.18024 nm and β=109.791°. In this compound, the structure of fullerenes is maintained and sulfur atoms form S₈ rings placed around the fullerenes.     

Structure, magnetic and thermal properties of Gd2MnTiO6

A new perovskite compound Gd₂MnTiO₆ was synthesized and its crystal structure, magnetic and thermal properties have been investigated. The XRD patterns were refined by the Rietveld method and the refined lattice parameters with the monoclinic space group P2₁/n (No. 14) were a=0.5398 (2), b=0.5704 (2), c=0.7767 (2) nm and β=89.68 (2)°. The antiferromagnetic behavior was observed below 16.0 K and λ-type heat capacity was measured near this temperature.     

Growth mechanism of stress corrosion cracking in high strength steel

Stress corrosion crack growth rates are measured at sveral stress intensity levels for low-tempered 4340 steel in 0.1N H₂SO₄ solution. The characteristics of the growth rates are divided into three regions of stress intensity factors: Region I near K_1SCC; Region III near unstable fracture toughness, K_1SC; and Region II, which lies between the two. K_1SCC is the value of K at which no crack growth can be detected after 240 hr.

In order to explain these experimental results, the crack initiation analysis reported in a previous paper is extended to the growth rates. A detached crack initiates and grows at the tip of an already existing crack. When the detached crack reaches the tip of the main crack, the process repeats as a new existing crack.

A relationship between crack growth rate, v, and stress intensity factor, K, is obtained as a function of b/a and a = b + d, where b is the distance from the tip of the main crack to the detached crack, and d is the ydrogen atom saturated domain.

The experimental data are in good agreement with the theoretical values in Region II when a = 0.02 mm, b/a = 0.8, c₁/c₀ = 2.8 for 200°C tempered specimens and a = 0.015 mm, b/a = 0.7, c₁/c₀ = 3.0, ρ_b = 0.055 mm for 400°C tempered specimens, where ρ_b is a fictitious notch radius. The plateau part in Region II for 400°C tempered specimens is also successfully explained by the present theory. For Region III, the value of b/a will be almost equal to 1 because v → ∞ for b/a → 1. On the other hand, for Region I, b/a will be zero, since the value of v becomes negligibly small and no crack growth is observable.     

Characterization and microstructure of highly preferred oriented lead barium titanate thin films on MgO (100) by sol-gel process

Highly preferred oriented lead barium titanate (Pb_1−x,Ba_x)TiO₃ thin film, with particular emphasis on (Pb_0.5,Ba_0.5)TiO₃, can be obtained by spin-coating on MgO (100) substrate by using the precursor sol, which was synthesized from acetylacetone chelating with titanium isopropoxide and ethylene glycol as a solvent, in the sol-gel process. Film thickness, pyrolysis temperature and heating rate were studied systemically to investigate their influences on the formation of preferred oriented thin films. The highly preferred (001)/(100) oriented thin film could be obtained by the pyrolysis of wet film at 500 °C and annealing at 600 °C at a slow heating rate of 5 °C/min. It is confirmed that the tetragonal perovskite structure of the titanate ceramic decreases with an increase of Ba content in (Pb_1−x,Ba_x)TiO₃. The (001)/(100) oriented films were synthesized from all compositions between x = 0.2 and x = 0.8, at a crystallization temperature of 600 °C. In particular, for the Ba content in the range of x = 0.50.6, highly preferred (001)/(100) planes were observed.     

Glass-free LTCC microwave dielectric ceramics

The sintering behavior, microstructure and microwave dielectric properties of complex pyrophosphate compounds AMP₂O₇ (A = Ca, Sr; M = Zn, Cu) were investigated in this paper. All compounds could be densified below the temperature of 950 °C without any glass addition, and exhibit low permittivity (_r < 8), high Q × f value and negative temperature coefficient of resonant frequency. The Q × f value was discussed from the point of view of bond strength. The chemical compatibility with silver and copper was also investigated. All compounds seriously react with silver at 700 °C. However SrZnP₂O₇ could be co-fired with copper in reduced atmosphere. The microwave dielectric properties of SrZnP₂O₇ sintered at 950 °C in reducing atmosphere are: _r = 7.06, Q × f = 52781 GHz, τ_f = −70 ppm/°C. In terms of its lower sintering temperature, chemical compatibility with copper and good microwave dielectric properties, SrZnP₂O₇ ceramic is very promising for low temperature co-fired ceramic (LTCC) applications.     

Piezoelectric and dielectric properties of PZT–PZN–PMS ceramics prepared by molten salt synthesis method

Piezoelectric powders and ceramics with the composition of Pb_0.95Sr_0.05(Zr_0.52Ti_0.48)O₃–Pb(Zn_1/3Nb_2/3)O₃–Pb(Mn_1/3Sb_2/3)O₃ (PZT–PZN–PMS) were prepared by molten salt synthesis (MSS) and conventional mixed-oxide (CMO) methods, respectively. The influence of synthesis process on the properties of powders and ceramics were investigated in detail. The results show that the MSS method significantly improved the sinterability of PZT–PZN–PMS ceramics, resulting in an improvement of dielectric and piezoelectric properties compared to the CMO method. The optimum values of MSS samples are as follows: _r = 1773; tan δ = 0.0040; T_c = 280 °C; d₃₃ = 455 pC/N; k_p = 0.70; Q_m = 888; E_c = 10.3 kV/cm; and P_r = 28.2 μC/cm², at calcination of 800 °C and sintering of 1120 °C temperature.     

Synthesis and physical characterization of magnetite nanoparticles for biomedical applications

Iron oxide nanoparticles for biomedical applications in the size range of 15–130 nm were prepared by either oxidative hydrolysis of ferrous sulfate with KOH or precipitation from ferrous/ferric chloride solutions. The magnetite particle size is controlled by variation of pH and temperature. The synthesized magnetite nanoparticles are partially oxidized as signaled by ferrous concentrations of below 24 wt% Fe²⁺ and lattice parameters of a₀ ≤ 8.39 Å which are smaller compared to 8.39 Å for stoichiometric magnetite. The extend of oxidation increases with decreasing particle size. Heating at 150–350 °C topotactically transforms the magnetite nanoparticles into stoichiometric tetragonal maghemite (ferrous ion concentration c_Fe²⁺=0 and a₀ = 8.34 Å) without significant particle growth. The magnetite–maghemite transformation is studied with thermal analysis, XRD and IR spectroscopy. The saturation magnetizations of the magnetite and maghemite particles decrease with decreasing particle size. The variation of M_s with particle size is interpreted using a magnetic core–shell particle model. Magnetite particles with d ≤ 16 nm show superparamagnetic behavior at room temperature whereas particles with diameter >16 nm display hysteresis behavior. These particles are candidates for biomedical applications, e.g. controlled drug release or hyperthermia.     

Templated grain growth of SrBi2Ta2O9 ceramics: Mechanism of texture development

Textured SrBi₂Ta₂O₉ (SBT) ceramics were fabricated via templated grain growth (TGG) technique using platelet-like SBT single crystal templates. The templates (5 wt%) were embedded in a fine-grain SBT powder matrix containing 3 wt% of Bi₂O₃ excess that were subjected to uniaxial pressing and sintering at 1000–1250 °C for up to 24 h. Microstructural characterization by SEM was performed to establish the effect of sintering parameters on the grain growth and texture development. It was found that the ceramics developed a bimodal microstructure with notable concentration of large (longer than 90 μm) aligned grains with c-axis oriented parallel to the pressing direction. The mechanism controlling the texture development and grain growth in SBT ceramics is discussed.     

Electrochromic properties of nanocrystalline MoO3 thin films

Electrochromic MoO₃ thin films were prepared by a sol–gel spin-coating technique. The spin-coated films were initially amorphous; they were calcined, producing nanocrystalline MoO₃ thin films. The effects of annealing temperatures ranging from 100 °C to 500 °C were investigated. The electrochemical and electrochromic properties of the films were measured by cyclic voltammetry and by in-situ optical transmittance techniques in 1 M LiClO₄/propylene carbonate electrolyte. Experimental results showed that the transmittance of MoO₃ thin films heat-treated at 350 °C varied from 80% to 35% at λ = 550 nm (ΔT =  45%) and from 86% to 21% at λ ≥ 700 nm (ΔT =  65%) after coloration. Films heat-treated at 350 °C exhibited the best electrochromic properties in the present study.