共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
一般的线性被动隔振系统因具有频率保持性而不能彻底隔离线谱激励,而对于非线性隔振系统则可能改变系统的频谱结构,特别是处于混沌状态时它的频谱是连续的宽频特性以消除或减弱特征线谱进行了研究。结果表明混沌隔振不仅对线谱有较好的隔离效果,而且整体隔振性能也比较好。 相似文献
3.
针对目前潜艇动力机械系统的线谱控制方法难以实现小能量控制混沌化、变工况下持续混沌化和小振幅混沌化难题,提出了基于状态反馈和开环加非线性闭环耦合的两自由度高静低动刚度隔振系统广义混沌同步化方法。首先,建立两自由度高静低动刚度隔振系统的动力学模型,分析其全局性态;然后,利用Chen系统作为驱动信号,采用HookeJeeves方法优化控制增益,通过状态反馈实现变工况下的持续混沌化;最后,利用开环加非线性闭环耦合的广义混沌同步实现高静低动刚度隔振系统大参数范围和小振幅混沌化。仿真结果表明,虽然基于状态反馈的广义混沌同步能实现两自由度高静低动隔振系统持续混沌化且线谱强度有所降低,但基座的振动幅值相比未混沌化前急剧加大;而基于开环加非线性闭环耦合的广义混沌同步能同时实现两自由度高静低动隔振系统变工况下的持续混沌化和小振幅下的混沌化,不仅能显著降低线谱强度,而且能有效抑制被隔振物体的振幅,解决了一般意义的混沌化方法无法解决的线谱抑制和振动隔离之间的冲突。 相似文献
4.
水下辐射噪声中的低频线谱是影响潜艇声隐身性能的主要因素,线谱混沌化控制技术通过处于混沌状态的非线性隔振系统将低频线谱转换为宽频混沌谱,可以实现频谱重构并降低线谱强度。前期研究表明,利用广义混沌同步方法可以实现变工况下隔振系统的持续混沌化,在某些情况下还能显著减小振幅,为线谱混沌化控制理论提供了新思路。然而,目前要利用广义混沌同步产生小振幅的持续混沌运动,只能通过"试错"来选择合适的混沌同步控制策略,还没有形成系统的方法。为此,提出了一种混沌同步控制策略构造方法。结合耦合Duffing隔振系统对该构造方法进行验证和说明,并将该方法应用于两自由度非线性隔振系统。 相似文献
5.
线谱是潜艇辐射噪声谱中最显著的特征,即使在潜艇以低速航行,产生最低的噪声辐射的情况下也可以探测到。利用混沌的宽频特性来降低潜艇辐射噪声线谱,提高其隐身能力已被广泛研究,但由于混沌的内在不确定特性,当系统处于混沌状态时,整体隔振性能不能得到保证。提出应用滑模变结构控制实现隔振系统和混沌系统投影同步的新方法,在保持原有隔振系统隔振性能的前提下有效的消除了线谱。该方法不用计算Lyapunov指数,且对参数失配具有很强的鲁棒性。通过对两自由度隔振系统和Duffing方程的数值仿真,验证了该方法可成功消除线谱且明显改善隔振系统的隔振性能。 相似文献
6.
线谱混沌化是提高潜艇声隐身性能的主要手段,但难以实现小振幅下的持续混沌化;同时,非线性隔振系统由于多个吸引子共存,混沌化品质依赖于初始条件和系统参数。为此,利用开环加非线性闭环方法研究两自由度非线性隔振系统的吸引子迁移和线谱混沌化。建立两自由度非线性隔振系统的动力学方程并分析其全局性态,得到系统的全局分岔特性及吸引子共存规律;通过开环加非线性闭环方法实现不同吸引子之间的迁移控制,使系统在不同初始条件下始终运行于基础振动最小的混沌吸引子上;利用开环加非线性闭环耦合方法实现驱动系统和响应系统之间的广义混沌同步,使系统在不同参数下始终处于小振幅持续混沌运动。仿真结果表明该方法具有可行性和稳定性,能实现隐匿线谱信息和保持隔振性能的双重功能。 相似文献
7.
8.
9.
10.
《振动与冲击》2021,(16)
为隐匿并降低船舶辐射水声中的线谱信息,提升船舶水声隐身性能,提出了一种基于混沌同步与迁移控制的船舶机械设备隔振系统(VIS)线谱控制方法。利用广义同步控制使隔振系统处于持续混沌运动状态,分析混沌同步系统的多吸引子共存现象以及不同吸引子对应的线谱控制效果,分别对开环控制、线性反馈控制、开环加闭环控制、开环加非线性闭环控制等迁移控制方法展开算法研究和稳定性研究,并将其应用于同步系统中混沌吸引子之间的迁移控制。仿真结果表明:广义同步控制下的隔振系统中有多个稳定的混沌吸引子,选择合适的迁移控制方法能够使混沌同步系统稳定运行于小振幅的混沌运动,降低特征线谱强度和设备振幅,并且该方法具有稳定性强、能耗低的特点。 相似文献
11.
A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils. 相似文献
12.
The end of over unit products of more than Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits beer wine yellow wine fruit syrup wine others cover over % of the national top-branded liquor products.…… 《中国标准化(英文版)》2008,25(1):30
The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.…… 相似文献
13.
Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster. 相似文献
14.
N.A. Odintsova N.V. Ageenko K.V. Kiselev N.M. Sanina E.Y. Kostetsky 《International Journal of Refrigeration》2006,29(3):387
We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes. 相似文献
15.
David R. Smith F. R. Fickett 《Journal of research of the National Institute of Standards and Technology》1995,100(2):119-171
Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability. 相似文献
16.
Fco. Javier Franco Pérez Marc Gener Moret 《Materials and Manufacturing Processes》2017,32(7-8):876-884
ABSTRACTThe production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials. 相似文献
17.
As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion. 相似文献
18.
Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting. 相似文献
19.
TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure. 相似文献
20.
R. Owsiński S. Kamiński M. Szymaniec A. Niesłony T. Łagoda 《Materialwissenschaft und Werkstofftechnik》2015,46(10):1059-1067
The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase. 相似文献