共查询到18条相似文献,搜索用时 78 毫秒
1.
高分子材料辐射接枝苯乙烯的研究进展 总被引:6,自引:0,他引:6
对各高分子材料辐射接枝苯乙烯的动力学,接枝方法及接枝材料的应用进行了综述,讨论限辐射剂量,剂量率,温度,后效应,溶剂,添加剂和高分子材料厚度及结晶性等方面对接枝反应的影响。 相似文献
2.
嵌入式轨道是一种普遍用于城市轨道交通减振降噪的轨道结构,该种轨道的钢轨埋置在高分子弹性材料中,只有轨头露出表面,所以高分子弹性材料是嵌入式轨道结构起到减振降噪作用的重要部分。利用轮轨滚动声辐射理论和有限元—边界元法,建立嵌入式轨道模型,调查高分子弹性材料弹性模量对嵌入式轨道结构振动声辐射的影响。在轮轨激励作用下,计算轨道结构的振动和声辐射响应,分析轨道结构辐射噪声的频谱规律。通过改变弹性材料的弹性模量,对比轨道结构振动沿纵向的衰减效果和沿横向的衰减效果,分析高分子弹性材料弹性模量对轨道结构减振特性的影响。 相似文献
3.
辐射固化技术由于满足"4E"原则而被誉为绿色技术,在诸多应用领域都显示了自身的优越性,近年来在国内外得到了迅猛发展,特别是紫外/电子束(UV/EB)辐射固化技术在近年采都处于高速发展时期.为了让研究人员对辐射固化材料的研究有一个全面了解和系统认识,充分拓展辐射固化材料的应用领域,从辐照源、化学体系、固化机理、应用等方面综述了紫外线固化和电子束固化的共性及区别.简单介绍了我国辐射固化材料的发展状况,展望了辐射固化材料的发展前景,对辐射固化技术的发展方向提出了建议,希望能促进辐射固化材料的发展,造福于人类. 相似文献
4.
新一代加速器的需要,引起人们对于寻找新的具有更好性能的闪烁材料的极大兴趣。文中简要介绍了耐辐射无机闪烁材料应满足的条件和研究动态。 相似文献
5.
6.
7.
论速了流场中潜艇耐压壳自由振动、受简谐力或力矩作用和受冲击载荷情况下的动力学响应和声辐射研究概况,讨论了带有阻尼材料的复合游艇耐压壳的动力学和声辐射研究情况,以及阻尼材料的破坏研究概况,并指出了今后的研究方向。 相似文献
8.
本文从简述辐射传热的一般理论着手,提出了低温下辐射传热的几个问题,分析了材料的辐射性质及对低温绝热的影响,描述了低温辐射传热的计算,最后提出了对减少低温辐射传热的一些看法。 相似文献
9.
电磁辐射控制材料是指通过与电磁波相互作用,能够调控电磁波传导、吸收和反射特性的材料,主要包括红外辐射控制材料、射频及微波辐射控制材料等。射频及微波辐射控制材料是高密度电子集成的重要支撑材料,红外辐射控制材料则应用于智能建筑节能、汽车隔热及电子设备的热量管理等。此外,作为隐身材 相似文献
10.
11.
12.
13.
N. Araki 《International Journal of Thermophysics》1990,11(2):329-337
Experimental data on thermal conductivity and thermal diffusivity of a semitransparent material generally include an error due to the radiation heat transfer. This error varies in accordance with the experimental conditions such as the temperature level of the sample and the measuring method. In this paper, research on the influence of radiation heat transfer on thermal diffusivity are reviewed, and as an example, the method to correct the radiation component in the apparent thermal diffusivity measured by the stepwise heating technique is presented. The transient heat transfer by simultaneous thermal conduction and radiation in a semitransparent material is analyzed when the front surface is subjected to stepwise heating. The apparent thermal diffusivity, which includes the radiation component, is calculated for various parameters.Paper presented at the Second U.S.-Japan Joint Seminar on Thermophysical Properties, June 23, 1988, Gaithersburg, Maryland, U.S.A. 相似文献
14.
15.
同步辐射原位X射线散射技术可以实现对材料结构进行多尺度的、无损的、高时间空间分辨率的表征,动态地揭示材料微观结构在不同外界环境下的演变过程。X射线散射基础理论已经相对成熟。第三代同步辐射光源大幅提高了X射线散射技术的时空分辨率,进一步拓宽X射线散射技术的应用场景。当前同步辐射原位X射线散射技术的难点主要集中于实验装置设计和大数据处理。概述了X射线散射技术的主要分类和基本的实验方法,主要介绍了不同分类的同步辐射原位X射线散射技术在纳米材料(纳米颗粒生长和纳米颗粒自组装)与能源材料(以钙钛矿薄膜材料为代表)研究中的应用。最后结合当前国内外先进同步辐射光源的发展现状,展望了同步辐射原位X射线散射技术未来发展的方向和应用前景。 相似文献
16.
17.
D. Martin M. Radoiu M. Dragusin R. Cramariuc I. Indreias C. Oproiu S. Marghitu A. Manea M. Toma V. Bestea 《Materials and Manufacturing Processes》1999,14(3):347-364
Radiation research results in the field of polymeric materials, obtained in the last few years by electron beam irradiation of aqueous solutions containing appropriate monomer mixtures, such as acrylamide, acrylic acid and vinyl acetate, are presented. Two types of polymeric flocculants for waste water treatment and three kinds of hydrogels for agriculture and medicine are described. The effects of radiation absorbed dose, radiation absorbed dose rate, and chemical composition of the irradiated solutions upon the polymeric materials characteristics are discussed. The required absorbed dose levels to produce the polymeric flocculants are in the range of 0.3 to 9 kGy and 4 kGy to 12 kGy for hydrogels. Some experimental results obtained by testing polymeric flocculants with waste water from food industry are given. Polymeric material processing was developed on a pilot plant level with ALID-7 electron linear accelerator of 5.5 MeV and 0.7 kW, built in the Electron Accelerator Laboratory of the Institute of Atomic Physics, Bucharest. A new facility permitting the application of simultaneous electron beam and microwave irradiation is presently under investigation. Preliminary results demonstrated that some polymeric flocculant characteristics, such as linearity, were improved by simultaneous electron beam and microwave treatment. Also, the absorbed dose levels decreased and intrinsic viscosity increased, respectively, by about two times by this new material processing method. 相似文献
18.
在列车车轮表面喷涂阻尼材料可以降低车轮振动声辐射,通过试验调查喷涂阻尼厚度对其减振降噪性能的影响。在半消声室进行对比试验,测试了斜曲型辐板车轮在无阻尼、喷涂1 mm和2 mm情况下的振动声辐射,和双S型辐板车轮在无阻尼、喷涂1 mm和4 mm阻尼下的声辐射。测试结果表明:对于斜曲型辐板车轮,2 mm阻尼层对车轮的减振区域和减振量均优于1 mm阻尼层,在径向和轴向激励下,1mm阻尼层降噪量分别为2.0 dB(A)和1.0 dB(A);对于双S型辐板车轮,在径向和轴向激励下,1 mm阻尼层降噪量分别为1.9 dB(A)和1.1 dB(A)。对于这两种辐板形式车轮,阻尼层增厚,降噪效果均增加。对于斜曲型车轮,在径向激励下阻尼具有更好的降噪效果,对于双S型车轮,在径向激励和轴向激励下阻尼降噪效果近似相同。 相似文献