共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
4.
鉴于已有模糊区域关系模型研究工作主要是针对二维空间中模糊区域间的拓扑关系,没有涉及三维立体空间中处于不同平面上的Vague区域间的不确定的拓扑关系,为了处理立体空间中复杂的Vague区域关系,基于Vague集对立体空间中的含核Vague区域之间的空间关系进行了详细的研究,给出了处于不同平面中的含核Vague区域关系的42种交集模型,进一步研究了处于同一平面和不同平面上的含核Vague区域关系的旋转对应性.研究成果可用于对立体空间中的含核Vague区域关系进行统一建模和数学分析,能较好地解决立体空间中的含核Vague区域关系的表示和分析问题. 相似文献
5.
立体视觉测量系统的空间分辨力随着物体的空间位置和移动方向的变化而变化,系统的空间分辨力高低在很大程度上会影响整个系统的测量精度。本文根据立体视觉测量系统的成像公式,对整个系统观察范围内的所有空间点的空间分辨力进行了详细分析与计算。结果表明,两个 CCD夹角在 80°~100°时系统的空间分辨力最高,并且 X方向的空间分辨力整体上高于 Y方向, Z方向的空间分辨力变化相对较小,最终的实验结果和仿真结果相吻合,根据系统空间分辨力的分布规律,本文制定出了制出了空间分辨力最优的立体视觉系统的参数设置方案。 相似文献
6.
立体视觉图像校正是加速立体匹配简单而常用的技术之一。采用几何法对使用棱镜的单镜头立体视觉系统图像进行校正,根据成像原理,从图像平面像素点反推到三维实体点的分析运算,利用成像光线几何关系求解虚拟相机外部参数,实现极线的校正,避免了复杂相机标定过程。同时,该算法可以从双棱镜应用推广到多面棱镜的单棱镜立体视觉系统图像校正。实验结果表明,基于几何法对使用棱镜的单镜头立体视觉系统图像校正是有效的。 相似文献
7.
针对虚拟现实技术中对空间刚体位置和姿态的定位与跟踪的需要,提出了一种确定轴对称回转体空间位置与姿态的立体视觉方法,开发了一个基于面阵CCD双目视觉传感的被动式光学立体定位与跟踪系统。试验结果表明,在执行机构运动速度为100mm/s的情况下,跟踪到的空间目标运动路径与真实值的最大偏差只有0.3mm,姿态角与真实值的最大偏差只有1.4°。实验结果证实,该系统满足虚拟现实技术中对空间目标定位与跟踪的精度要求。 相似文献
8.
9.
比较了影像增强器型C臂和平板C臂这两种C臂系统在空间定位上的优劣势,在此基础上设计了一种针对平板C臂的定位方法,该方法借助相机的针孔模型标定C臂系统成像模型,应用三角测量原理进行空间点的定位.利用自行设计的标定模板进行了单、双平板C臂的标定及立体定位试验.试验结果表明,双平板C臂的定位精度高于单平板C臂,两者定位的最大误差均小于1.25mm,平均误差小于0.62mm,均能满足临床应用需要.该方法具有原理简单、易实现的优点,由于成像原理的一致性,对不同厂家生产的平板C臂具有通用性. 相似文献
10.
基于感知重要性的立体图像质量评价方法 总被引:1,自引:0,他引:1
立体图像质量评价是评价立体视频系统性能的有效途径,而如何对立体图像质量进行有效的客观评价是目前的研究难点。本文提出了一种基于感知重要性的立体图像质量评价方法。该评价方法通过分析视觉显著和失真对感知质量的影响,建立立体图像视觉感知重要性模型,将立体图像分为四类区域:显著失真区域、显著非失真区域、非显著失真区域和非显著非失真区域,然后对各个区域分别进行评价,最后通过对各个区域赋予不同的权值从而预测得到最终的客观评价值。实验结果表明,该方法与主观评价结果有较好的相关性,符合人眼视觉系统。 相似文献
11.
《工程(英文)》2020,6(1):68-76
In this study, a three-dimensional (3D) in-situ laser machining system integrating laser measurement and machining was built using a 3D galvanometer scanner equipped with a side-axis industrial camera. A line structured light measurement model based on a galvanometer scanner was proposed to obtain the 3D information of the workpiece. A height calibration method was proposed to further ensure measurement accuracy, so as to achieve accurate laser focusing. In-situ machining software was developed to realize time-saving and labor-saving 3D laser processing. The feasibility and practicability of this in-situ laser machining system were verified using specific cases. In comparison with the conventional line structured light measurement method, the proposed methods do not require light plane calibration, and do not need additional motion axes for 3D reconstruction; thus they provide technical and cost advantages. The in-situ laser machining system realizes a simple operation process by integrating measurement and machining, which greatly reduces labor and time costs. 相似文献
12.
本文利用柔性的三维特性,结合盈亏平衡分析,探讨了对生产系统投资决策时,如何选择最佳的柔性水平以达到利润的最大化。 相似文献
13.
P.Y. Tabakov 《Composite Structures》2005,71(3-4):453-462
A mathematical apparatus is developed for the analysis of the three-dimensional stress–strain state with small deflections of laminated orthotropic plates of any thickness and non-symmetrical layer structure through the thickness. This theory is based on the representation of the displacement vector in terms of products of the given functions in the direction of the axes x1, x2 and the unknown functions over the axis x3. Both the real and complex roots of the characteristic equation describing the representation of the sought functions through the thickness of the plate are taken into account. Such an approach allows us to expand the scope of physical and mechanical relationships among the material characteristics. 相似文献
14.
在立体构成课的造型训练中,利用简单的基本材料的限制,开发学生的创造性思雏,使非专业人员看来平淡无奇、能力有限的常规材料,在专业设计者手中成为表现力无限的常新材料。 相似文献
15.
从行业特点和软件工程的角度出发,系统的研究了瓦楞纸箱辅助决策和设计理论.采用编码技术、三维搜索方法等解决了相似方案检索和纸箱优化设计问题.利用AutoCAD二次开发技术和COM技术完成了图形的显示和设计结果的输出. 相似文献
16.
Finite element analyses of three-dimensional crack problems in piezoelectric structures 总被引:1,自引:0,他引:1
Fulin Shang Author Vitae Author Vitae Martin Abendroth Author Vitae 《Engineering Fracture Mechanics》2003,70(2):143-160
In this paper, electromechanical fracture mechanics and finite element techniques for crack analyses are extended to three-dimensional crack configurations. Penny-shaped cracks and elliptical cracks are analyzed, subjected to combined mechanical tension and electric fields. For the penny-shaped crack, exact solutions originating from different resources are compared with numerical results. Some errors in the literature concerning the analytical solution for the elliptical crack are corrected. Numerical results of the stress-intensity factors and energy release rates for these crack configurations are presented. 相似文献
17.
Fabrication and characterization of three-dimensional cellular-matrix composites reinforced with woven carbon fabric 总被引:1,自引:0,他引:1
Yiping Qiu Wei Xu Youjiang Wang Mohammed A. Zikry Mansour H. Mohamed 《Composites Science and Technology》2001,61(16):2425-2435
A low-density three-dimensional cellular-matrix composite reinforced with woven carbon fabric (3DCMC), was fabricated by means of a pressure-quenching molding technique with nitrogen gas as the blowing agent. Epoxy resins in the interstices of yarns in the 3DCMC samples were vacated during the foaming process and needle shaped voids were also generated between fibers in yarns. The average density of the 3DCMC samples was about 103 kg/m3, and their density reduction was 28–37% compared with a regular matrix composite with the same preform. The 3DCMC has 32–42% higher specific tensile strength, 14–37% greater specific tensile modulus, a lower specific flexure strength but 35% higher specific tangent modulus in 3-point bending, a 30–40% higher specific impact energy absorption at an impact velocity around 120 m/s and a similar specific energy absorption at about 220 m/s. Meanwhile, the 3-point bending and impact test results of 3DCMC showed that they have different fracture mechanisms from that of 3DRMC. 相似文献
18.
目的:通过1312例孕妇产前胎儿超声检查结果,研究三维超声在产前胎儿畸形诊断中的应用价值。方法:对2010年1月至2011年12月本院孕期经超声诊断的胎儿畸形87例病例资料进行回顾性分析.比较胎儿畸形在产前三维超声诊断结论与产后检出的数量及结果。结果:87例畸形胎儿中,产前诊断与产后检查完全相符86例,漏诊1例。畸形病例中,以中枢神经系统畸形最为常见。结论:三维超声可在孕期诊察胎儿器官发育情况.在产前预先发现先天性畸形,对临床有重要的诊断价值。 相似文献
19.
多视图3D液晶显示器显示深度计算 总被引:2,自引:0,他引:2
给出了针对多视图3D液晶显示器的虚体素明确的定义,对虚体素的特性做了说明。在深入掌握多视图3D液晶显示器显示原理的基础上,对虚体素显示深度做了详细的研究。研究了虚体素显示深度与同名点距离以及观察距离的关系,并以StereoGraphics公司的Symthagram204显示器为例作了定量计算。针对该显示器,根据透镜阵列折射原理给出公式,计算了不同同名点距离时最远的可观察距离;在此基础上,对不同的同名点距离计算了最大的虚体素显示深度,在给定两眼间距为65mm时,得出该型显示器的最佳观察距离为1.26m。研究结果为多视图3D液晶显示器性能的度量和比较提供了一个定量的标准。 相似文献