N-benzyl-N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]amine as corrosion inhibitor of steel in 1 M HCl

The inhibition effect of a new bipyrazole derivative namely N-benzyl-N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]amine (BBPA) on the corrosion of steel in 1 M HCl is studied at 308 K. Weight-loss measurements, potentiodynamic polarisation, linear polarisation and impedance spectroscopy (EIS) methods were used. Results show that BBPA is a good inhibitor and inhibition efficiency reaches 87% at 5 · 10^− 4 M. The values of the inhibition efficiency calculated from these techniques are reasonably in good agreement. Polarisation curves revealed that this organic compound acts as a mixed-type inhibitor. The temperature effect on the corrosion behaviour of steel in 1 M HCl with and without BBPA at 5 · 10^− 4 M is studied in the temperature range 308-353 K. The associated activation energy is determined. The adsorption of BBPA on the steel surface obeys to the Langmuir's adsorption isotherm. EIS measurements show that the transfer resistance increases with the inhibitor concentration. Efficiency is explained by the theoretical studies.     

Green approach to corrosion inhibition of mild steel in two acidic solutions by the extract of Punica granatum peel and main constituents

The effect of the extract of Punica granatum (PG) and their main constituents involve ellagic acid (EA) and tannic acid (TA), as mild steel corrosion inhibitor in 2 M HCl and 1 M H₂SO₄ solutions was investigated by weight loss measurements. The results obtained from the weight loss measurements show that the inhibition efficiency of TA even in high concentration is very low. Thus, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) investigations were used for different concentrations of PG and EA and best concentration of TA. Potentiodynamic polarization curves indicated that PG and EA behave as mixed-type inhibitors. EIS measurements show an increase of the transfer resistance with increasing inhibitor concentration. The temperature effect on the corrosion behavior of steel without and with the PG extract was studied. The inhibition action of the extract was discussed in view of Langmuir adsorption isotherm.     

Green approach to corrosion inhibition of mild steel in hydrochloric acid and sulphuric acid solutions by the extract of Murraya koenigii leaves

The inhibition of the corrosion of mild steel in hydrochloric acid and sulphuric acid solutions by the extract of Murraya koenigii leaves has been studied using weight loss, electrochemical impedance spectroscopy (EIS), linear polarization and potentiodynamic polarization techniques. Inhibition was found to increase with increasing concentration of the leaves extract. The effect of temperature, immersion time and acid concentration on the corrosion behavior of mild steel in 1 M HCl and 0.5 M H₂SO₄ with addition of extract was also studied. The inhibition was assumed to occur via adsorption of the inhibitor molecules on the metal surface. The adsorption of the extract on the mild steel surface obeys the Langmuir adsorption isotherm. The activation energy as well as other thermodynamic parameters (Q, ΔH^*, and ΔS^*) for the inhibition process was calculated. These thermodynamic parameters show strong interaction between inhibitor and mild steel surface. The results obtained show that the extract of the leaves of M. koenigii could serve as an effective inhibitor of the corrosion of mild steel in hydrochloric and sulphuric acid media.     

Adsorption and corrosion inhibition effect of 2-((5-mercapto-1,3,4-thiadiazol-2-ylimino)methyl)phenol Schiff base on mild steel

In this study, the inhibition effect of 2-((5-mercapto-1,3,4-thiadiazol-2-ylimino)methyl)phenol Schiff base (MTMP) on mild steel corrosion in 0.5 M HCl solution was studied. For this aim, electrochemical techniques such as potentiodynamic polarization curves, weight loss (WL), electrochemical impedance spectroscopy (EIS) and linear polarization resistance (LPR) were used. It was shown that, the MTMP Schiff base has remarkable inhibition efficiency on the corrosion of mild steel in 0.5 M HCl solution. Polarization measurements indicated that, the studied inhibitor acts as mixed type corrosion inhibitor with predominantly control of cathodic reaction. The inhibition efficiency depends on the concentration of inhibitor and reaches 97% at 1.0 mM MTMP. The remarkable inhibition efficiency of MTMP was discussed in terms of blocking of electrode surface by adsorption of inhibitor molecules through active centers. The adsorption of MTMP molecules on the mild steel surface obeys Langmuir adsorption isotherm.     

The inhibition of mild steel corrosion in 1 M hydrochloric acid solutions by triazole derivative

The title compound 1-(4,5-dihydro-3-phenylpyridine-1-yl)-2-(1H-1,2,4-triazole-1-yl)ethyl ketone (DTE) was synthesized and its inhibiting action on the corrosion of mild steel in 1 M hydrochloric acid solutions was investigated by means of weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and scanning electronic microscope (SEM). Results obtained revealed that DTE performed excellently as a corrosion inhibitor for mild steel in 1 M hydrochloric acid media and its efficiency attains more than 90.9% at 1.0 × 10^− 3 M at 298 K. Polarization curves indicated that the inhibitor behave mainly as mixed-type inhibitor. EIS showed that the charge transfer controls the corrosion process in the uninhibited and inhibited solutions. Adsorption of the inhibitor on the mild steel surface followed Langmuir adsorption isotherm. And the values of the free energy of adsorption ΔG_ads indicated that the adsorption of DTE molecule was a spontaneous process and was typical of chemisorption.     

Electrochemical and quantum chemical study of 4-[(E)-[(2,4-dihydroxy phenyl) methylidine] amino]-6-methyl-3-sulphanylidine-2,3,4,5-tetra hydro-1,2,4-triazin-5-one [DMSTT]

The inhibition of mild steel in aerated 1 M hydrochloric acid solution was studied using conventional weight loss method, potentiodynamic polarization studies (Tafel), linear polarization studies (LPR), electrochemical impedance spectroscopy (EIS) and quantum chemical calculation in the presence and absence of different concentrations of DMSTT. The inhibition efficiency increased markedly with increase in the additive concentrations, but slightly decreased with increasing temperature. The presence of DMSTT decreases the double layer capacitance and increases the charge-transfer resistance. The value of activation energy (E_a) for mild steel corrosion and thermodynamic parameters such as adsorption equilibrium constant (K_ads), free energy of adsorption (ΔG_ads) values were calculated and discussed. The inhibitor molecule first adsorbed on mild steel surface according to Langmuir adsorption isotherm.     

Corrosion and impedance studies on magnesium alloy in oxalate solution

Corrosion behavior of AZ91E alloy was investigated in oxalate solution using potentiodynamic polarization and electrochemical impedance measurements (EIS). The effect of oxalate concentration was studied, where the corrosion rate increases with increasing oxalate concentration. The effect of added ions (Br⁻, Cl⁻ or SiO₃²⁻) on the electrochemical behavior of magnesium alloy in 0.1 M Na₂C₂O₄ solution at 298 K, was investigated. It was found that the corrosion rate of 0.1 M oxalate solution containing silicate ion is lower than the blank (0.1 M Na₂C₂O₄). This was confirmed by scanning electron microscope (SEM) observations. However, for the other added ions Br⁻ or Cl⁻, the corrosion rate is higher than the blank.     

The corrosion inhibition and adsorption behavior of Uncaria gambir extract on mild steel in 1 M HCl

The inhibitive effect of the ethyl acetate extract of Uncaria gambir on the corrosion of mild steel in 1 M HCl solution has been investigated by weight loss measurement as well as potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The presence of this catechin-containing extract reduces remarkably the corrosion rate of mild steel in acidic solution. The effect of temperature on the corrosion behavior of mild steel was studied in the range of 303–333 K. The results from this corrosion test clearly reveal that the extract behaves as a mixed type corrosion inhibitor with the highest inhibition at 1000 ppm. Surface analyses via scanning electron microscope (SEM) shows a significant improvement on the surface morphology of the mild steel plate. Linearity of Langmuir isotherm adsorptions indicated the monolayer formation of inhibitor on mild steel surface.     

Streptomycin: A commercially available drug as corrosion inhibitor for mild steel in hydrochloric acid solution

The corrosion inhibition of mild steel in 1 M HCl solution by Streptomycin has been studied by Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. The inhibitor showed 88.5% inhibition efficiency at optimum concentration 500 ppm. Results obtained revealed that inhibition occurs through adsorption of the drug on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization studies suggest that it is a mixed type of inhibitor. Electrochemical impedance spectroscopy techniques were also used to investigate the mechanism of corrosion inhibition.     

Copper corrosion inhibition by Azadirachta indica leaves extract in 0.5 M sulphuric acid

Azadirachta indica leaves extract (AI) was investigated as a copper corrosion inhibitor in 0.5 M sulphuric acid. Inhibition efficiency of AI was compared to that of the already proven good inhibitors 2-acetamino-5-mercapto-1,3,4-thiadiazole (AAMTDA) and 1,2,3-benzotriazole (BTAH). The inhibition properties were studied using electrochemical polarization and weight loss techniques. In the region of active copper dissolution, the highest inhibition efficiency was exhibited by AAMTDA (92.7%). AI exhibited somewhat higher efficiency (86.4%) than the widely used BTAH (85.5%), showing that the extract could serve as a effective substitute for currently preferred copper corrosion inhibitors in sulphuric acid. The weight loss results were interpreted by means of the Frumkin isotherm of adsorption on the metal surface. The values of ΔG_ads equal to − 41.96 kJ mol^− 1 for AAMTDA and − 35.22 kJ mol^− 1 for BTAH indicate strong spontaneous adsorption while the surface coverage dependence on the log c following the Frumkin isotherm is suggestive of chemisorption in case of all three tested inhibitors.     

The inhibition effect of some pyrimidine derivatives on austenitic stainless steel in acidic media

5-Benzoyl-4-(substitutedphenyl)-6-phenyl-3,4-dihydropyrimidine-2(1H)-(thio)ones (DHPMs) (I and II) were synthesized using the Biginelli three component cyclocondensation reaction of an appropriate β-diketone, arylaldehyde, and (thio) urea. The effect of these corrosion inhibitors on the corrosion of austenitic stainless steel in 0.5 M H₂SO₄ has been studied by electrochemical methods using Tafel plot, linear polarization and electrochemical impedance spectroscopy at 298 K. The inhibition efficiencies obtained from all the methods employed are in good agreement. The adsorption of the DHPMs onto the stainless steel surface was found to follow Langmuir and Dubinin–Radushkevich adsorption isotherm models. Negative values of ΔG_ads in the acidic media ensured the spontaneity of the adsorption process. Results show DHPM I to be the best inhibitor with a mean efficiency of 91% at 2 × 10⁻³ M additive concentration.     

Inhibitive effect of synthesized 2-(3-pyridyl)-3,4-dihydro-4-quinazolinone as a corrosion inhibitor for mild steel in hydrochloric acid

In this study, the inhibitive effect of synthesized 2-(3-pyridyl)-3,4-dihydro-4-quinazolinone (PDQ) as a new corrosion inhibitor for mild steel in 0.1 M hydrochloric acid media is investigated employing potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and linear polarization resistance (LPR) techniques. The results show PDQ reduces anodic dissolution, retards the hydrogen evolution reaction and its adsorption obeys the Langmuir's adsorption isotherm. By increase in temperature, corrosion current density increases, however, its increase is lower in the presence of PDQ. By increase in temperature from 25 °C to 45 °C the inhibition efficiency decreases from 93% to 83% in solution containing 200 ppm inhibitor. Thermodynamic adsorption parameters show that PDQ is absorbed by a spontaneous exothermic process and its adsorption mechanism is combination of physical and chemical style.     

Electrochemical and thermodynamic studies to evaluate inhibition effect of 2-[(4-phenoxy-phenylimino)methyl]-phenol in 1 M HCl on mild steel

Inhibition of the corrosion of mild steel in 1.0 M HCl solution by a Schiff base compound named 2-[(4-phenoxy-phenylimino)methyl]-phenol (APS) was investigated at different temperatures (25–55 °C) using electrochemical measurements. The inhibition efficiency increased as APS concentration and temperature increased. It was found that adsorption for APS on mild steel complies with the Langmuir adsorption isotherm in all studied temperature. Thermodynamic parameters (ΔG_ads, ΔH_ads and ΔS_ads) for APS adsorption on mild steel were found out and discussed at each temperature. Time dependency of mild steel in 1.0 M HCl solution in the absence and presence of APS was also studied. The surface morphology of mild steel was examined via SEM analysis.     

Inhibition of corrosion of mild steel in acid media by N′-benzylidene-3-(quinolin-4-ylthio)propanohydrazide

In the present investigation a new corrosion inhibitor, N′-(3,4-dihydroxybenzylidene)-3-{[8-(trifluoromethyl)quinolin-4-yl]thio}propanohydrazide(DHBTPH) was synthesized, characterized and tested as a corrosion inhibitor for mild steel in HCl (1 M, 2 M) and H₂SO₄ (0·5 M, 1 M) solutions using weight-loss method, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization methods. The corrosion inhibition efficiency measured by all the above three techniques were in good agreement with each other. The results showed that DHBTPH is a very good inhibitor for mild steel in acidic media. The inhibition efficiency in different acid media was found to be in the decreasing order 0·5 M H₂SO₄ > 1 M HCl > 1 M H₂SO₄ > 2 M HCl. The inhibition efficiency increases with increasing inhibitor concentration and with increasing temperature. It acts as an anodic inhibitor. Thermodynamic and activation parameters are discussed. Adsorption of DHBTPH was found to follow the Langmuir’s adsorption isotherm. Chemisorption mechanism is proposed. The mild steel samples were also analysed by scanning electron microscopy (SEM).     

Corrosion inhibition of nickel in H2SO4 solution by alanine

The effect of alanine, as a safe inhibitor, was studied by measuring the corrosion of Ni in aerated and stagnant 1 M H₂SO₄ solution (pH ～0.2). Measurements were performed under various conditions using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and the new electrochemical frequency modulation (EFM) methods. The obtained results showed that the addition of alanine alone gives a moderate inhibition and acts as an anodic-type inhibitor. The inhibition is due to physical adsorption of alanine on the metal surface. The inhibition efficiency enhances with increasing alanine concentration and immersion time but decreases with rise in temperature. The apparent activation energy, E_a, is higher in the presence than in the absence of alanine. Addition of I^? ions greatly improves the inhibition efficiency of alanine. The synergistic effect is due to enhanced adsorption of alanine cations by chemisorbed I^? anions on the metal surface. The results obtained from polarization, EIS and EFM techniques are in good agreement indicating that EFM method can be used successfully for monitoring corrosion rate of Ni in H₂SO₄ solution with and without alanine.     

Corrosion inhibition of carbon steel and antibacterial properties of aminotris-(methylenephosphonic) acid

In this work, the corrosion inhibition property and the antibacterial activity of the aminotris-(methylenephosphonic) acid (ATMP) have been studied. ATMP has been evaluated as a corrosion inhibitor for carbon steel in 1 M HCl solution using weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. According to the experimental results, the inhibition efficiency increased with increasing inhibitor concentration. Tafel polarization study showed that the ATMP acts as a mixed inhibitor. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through appropriate equivalent circuit models. Adsorption of ATMP on the carbon steel surface obeyed the Langmuir adsorption isotherm. The calculated ΔG_ads value showed that the corrosion inhibition of the carbon steel in 1 M HCl is mainly controlled by a physisorption process. In addition, the effect of immersion time on the corrosion of carbon steel was also studied in this work using ac impedance technique. The corrosion inhibition mechanism of ATMP was discussed. This inhibitor can be also used as biocide in aqueous environments. Our results showed that ATMP have an antibacterial effect against both Gram positive and Gram negative bacteria. The lowest MIC (0.2 mg l^?1) was measured for Pseudomonas fluorescens while the highest MIC was measured for Escherichia coli (3.1 mg l^?1). In addition, the results showed that the MIC of ATMP against Listeria innocua in a buffered medium (pH 6.5) was of ca. 4-fold higher than MIC measured in unbuffered medium. Thus, our findings showed that the antibacterial activity of ATMP is a result of a combined effect of the pH solution and the chemical nature of the used phosphonate molecule.     

Electrochemical impedance study on the corrosion of Al-Pure in hydrochloric acid solution using Schiff bases

The inhibition effect of newly synthesized Schiff bases N-benzylidene benzylamine (A) and benzenemethanamine-α-methyl-N-(phenylmethylene) (B) on the corrosion behaviour of Al-Pure in 1·0 M HCl was studied using galvanostatic polarization and electrochemical impedance spectroscopy (EIS) and adsorption studies. The effects of inhibitor concentration, temperature and surface coverage are investigated. The effect of inhibitor concentration and other parameters are evaluated for different inhibitor concentrations and the probable mechanism was also proposed. The results show that (A) and (B) possess excellent inhibiting effect for the corrosion of Al-Pure and the inhibitors act as mixed type inhibitors. The inhibitors do not affect the mechanism of the electrode processes and inhibit corrosion by blocking the reaction sites. The high inhibition efficiency of (A) and (B) were due to the adsorption of inhibitor molecules on the metal surface. The decrease of surface area available for electrode reactions to take place is due to the formation of a protective film. Activation energy and free energy of adsorption have been calculated.     

The use of Euphorbia falcata extract as eco-friendly corrosion inhibitor of carbon steel in hydrochloric acid solution

Euphorbia falcata L. extract (EFE) was investigated as eco-friendly corrosion inhibitor of carbon steel in 1 M HCl using gravimetric, ac impedance, polarization and scanning electron microscopy (SEM) techniques. The experimental results show that EFE is good corrosion inhibitor and the protection efficiency is increased with the EEF concentration. The results obtained from weight loss and ac impedance studies were in reasonable agreement. Impedance experimental data revealed a frequency distribution of the capacitance, simulated as constant phase element. Polarization curves indicated that EFE is a mixed inhibitor. The corrosion inhibition was assumed to occur via adsorption of EFE molecules on the metal surface. The adsorption of the E. falcata extract was well described by the Langmuir adsorption isotherm. The calculated ΔG_ads^o value showed that the corrosion inhibition of the carbon steel in 1 M HCl is mainly controlled by a physisorption process.     

The electrochemical synthesis of poly(pyrrole-co-o-anisidine) on 3102 aluminum alloy and its corrosion protection properties

The electrochemical syntheses of polypyrrole (PPy) and poly(pyrrole-co-o-anisidine) were achieved on 3102 aluminum alloy (Al) from 0.1 M monomer (pyrrole:o-anisidine, 8:2) containing 0.4 M oxalic acid solution using the cyclic voltammetry technique. The synthesized films were characterized by FT-IR spectroscopy. The thermal stability of films was determined by thermogravimetric analysis (TGA) technique. Surface morphologies were characterized by scanning electron microscope (SEM) images. The potential of zero charge (pzc) of Al was determined using electrochemical impedance spectroscopy (EIS). The corrosion behavior of samples was investigated with open circuit potential (E_ocp)–time, EIS, and anodic polarization techniques. It was found that copolymer coated Al provides better barrier property against of corrosion in 3.5% NaCl solution.     

The inhibition action of N-(furfuryl)-N′-phenyl thiourea on the corrosion of mild steel in hydrochloric acid medium

The inhibiting effect of N-(furfuryl)-N′-phenyl thiourea (FPTU) on the corrosion of mild steel in 0.01 M HCl solution has been demonstrated using potentiodynamic polarization technique. The polarization data have shown that FPTU acts as an efficient anodic inhibitor for mild steel in acid solution. Adsorption of this compound on the mild steel surface was found to obey Temkin's adsorption isotherm. Good inhibition efficiency (> 93%) has been evidenced at 28 °C and 50 °C and inhibition is governed by chemisorption mechanism.