Synthesis of tin oxide-coated gold nanostars and evaluation of their surface-enhanced Raman scattering activities

Tin oxide-coated gold nanostar hybrid nanostructures are prepared by first synthesizing gold nanostars (ca. 400 nm), then introducing Na₂SnO₃ precursor followed by its hydrolysis and formation of a tin oxide layer on nanoparticle surface. The synthesized hybrid structures have been characterized by combination of UV–Vis spectroscopy, transmission electron microscope (TEM), energy-dispersive X-ray studies, scanning electron microscope (SEM), X-Ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The TEM and SEM analyses showed that gold nanostars have a coating with an approximate thickness of 15 nm. The tin (IV) oxide coating on the gold nanostars was identified by XRD and XPS analyses and confirmed by FTIR spectroscopy. Surface-enhanced Raman scattering (SERS) spectroscopy was performed on tin oxide-coated and uncoated gold nanostars with crystal violet as a probe molecule. The SERS studies revealed field enhancement properties of Au nanostars, thus their strong SERS activity remained after tin oxide coating.     

Shape-dependent surface-enhanced Raman scattering in gold-Raman probe-silica sandwiched nanoparticles for biocompatible applications

To meet the requirement of Raman probes (labels) for biocompatible applications, a synthetic approach has been developed to sandwich the Raman-probe (malachite green isothiocyanate, MGITC) molecules between the gold core and the silica shell in gold-SiO? composite nanoparticles. The gold-MGITC-SiO? sandwiched structure not only prevents the Raman probe from leaking out but also improves the solubility of the nanoparticles in organic solvents and in aqueous solutions even with high ionic strength. To amplify the Raman signal, three types of core, gold nanospheres, nanorods and nanostars, have been chosen as the substrates of the Raman probe. The effect of the core shape on the surface-enhanced Raman scattering (SERS) has been investigated. The colloidal nanostars showed the highest SERS enhancement factor while the nanospheres possessed the lowest SERS activity under excitation with 532 and 785 nm lasers. Three-dimensional finite-difference time domain (FDTD) simulation showed significant differences in the local electromagnetic field distributions surrounding the nanospheres, nanorods, and nanostars, which were induced by the localized surface plasmon resonance (LSPR). The electromagnetic field was enhanced remarkably around the two ends of the nanorods and around the sharp tips of the nanostars. This local electromagnetic enhancement made the dominant contribution to the SERS enhancement. Both the experiments and the simulation revealed the order nanostars > nanorods > nanospheres in terms of the enhancement factor. Finally, the biological application of the nanostar-MGITC-SiO? nanoparticles has been demonstrated in the monitoring of DNA hybridization. In short, the gold–MGITC-SiO? sandwiched nanoparticles can be used as a Raman probe that features high sensitivity, good water solubility and stability, low-background fluorescence, and the absence of photobleaching for future biological applications.     

Competitive Reaction Pathway for Site‐Selective Conjugation of Raman Dyes to Hotspots on Gold Nanorods for Greatly Enhanced SERS Performance

Common methods to prepare SERS (surface‐enhanced Raman scattering) probes rely on random conjugation of Raman dyes onto metal nanostructures, but most of the Raman dyes are not located at Raman‐intense electromagnetic hotspots thus not contributing to SERS enhancement substantially. Herein, a competitive reaction between transverse gold overgrowth and dye conjugation is described to achieve site selective conjugation of Raman dyes to the hotspots (ends) on gold nanorods (GNRs). The preferential overgrowth on the nanorod side surface creates a barrier to prevent the Raman dyes from binding to the side surface except the ends of the GNRs, where the highest SERS enhancement factors are expected. The SERS enhancement observed from this special structure is dozens of times larger than that from conjugates synthesized by conventional methods. This simple and powerful strategy to prepare SERS probes can be extended to different anisotropic metal nanostructures with electromagnetic hotspots and has immense potential in in‐depth SERS‐based biological imaging and single‐molecule detection.     

Identification of Individual Exosome‐Like Vesicles by Surface Enhanced Raman Spectroscopy

Exosome‐like vesicles (ELVs) are a novel class of biomarkers that are receiving a lot of attention for the detection of cancer at an early stage. In this study the feasibility of using a surface enhanced Raman spectroscopy (SERS) based method to distinguish between ELVs derived from different cellular origins is evaluated. A gold nanoparticle based shell is deposited on the surface of ELVs derived from cancerous and healthy cells, which enhances the Raman signal while maintaining a colloidal suspension of individual vesicles. This nanocoating allows the recording of SERS spectra from single vesicles. By using partial least squares discriminant analysis on the obtained spectra, vesicles from different origin can be distinguished, even when present in the same mixture. This proof‐of‐concept study paves the way for noninvasive (cancer) diagnostic tools based on exosomal SERS fingerprinting in combination with multivariate statistical analysis.     

Bimetallic Nanostructures as Active Raman Markers: Gold‐Nanoparticle Assembly on 1D and 2D Silver Nanostructure Surfaces

It is demonstrated that bimetallic silver–gold anisotropic nanostructures can be easily assembled from various nanoparticle building blocks with well‐defined geometries by means of electrostatic interactions. One‐dimensional (1D) silver nanowires, two‐dimensional (2D) silver nanoplates, and spherical gold nanoparticles are used as representative building blocks for bottom‐up assembly. The gold nanoparticles are electrostatically bound onto the 1D silver nanowires and the 2D silver nanoplates to give bimetallic nanostructures. The unique feature of the resulting nanostructures is the particle‐to‐particle interaction that subjects absorbed analytes to an enhanced electromagnetic field with strong polarization dependence. The Raman activity of the bimetallic nanostructures is compared with that of the individual nanoparticle blocks by using rhodamine 6G solution as the model analyte. The Raman intensity of the best‐performing silver–gold nanostructure is comparable with the dense array of silver nanowires and silver nanoplates that were prepared by means of the Langmuir–Blodgett technique. An optimized design of a single‐nanostructure substrate for surface‐enhanced Raman spectroscopy (SERS), based on a wet‐assembly technique proposed here, can serve as a compact and low‐cost alternative to fabricated nanoparticle arrays.     

High Figure of Merit (FOM) of Bragg Modes in Au‐Coated Nanodisk Arrays for Plasmonic Sensing

Gold‐coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface‐enhanced Raman scattering (SERS), large‐scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface‐guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold‐coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96‐well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high‐performance plasmonic sensing.     

High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.     

Au@pNIPAM SERRS Tags for Multiplex Immunophenotyping Cellular Receptors and Imaging Tumor Cells

Detection technologies employing optically encoded particles have gained much interest toward clinical diagnostics and drug discovery, but the portfolio of available systems is still limited. The fabrication and characterization of highly stable surface‐enhanced resonance Raman scattering (SERRS)‐encoded colloids for the identification and imaging of proteins expressed in cells are reported. These plasmonic nanostructures are made of gold octahedra coated with poly(N‐isopropylacrylamide) microgels and can be readily encoded with Raman active dyes while retaining high colloidal stability in biofluids. A layer‐by‐layer polyelectrolyte coating is used to seal the outer surface of the encoded particles and to provide a reactive surface for covalent conjugation with antibodies. The targeted multiplexing capabilities of the SERRS tags are demonstrated by the simultaneous detection and imaging of three tumor‐associated surface biomarkers: epidermal growth factor receptor (EGFR), epithelial cell adhesion molecule (EpCAM), and homing cell adhesion molecule (CD44) by SERRS spectroscopy. The plasmonic microgels are able to discriminate tumor A431 (EGFR+/EpCAM+/CD44+) and nontumor 3T3 2.2 (EGFR?/EpCAM?/CD44+) cells while cocultured in vitro.     

Gold Binary‐Structured Arrays Based on Monolayer Colloidal Crystals and Their Optical Properties

A simple and flexible route is presented to fabricate a gold binary‐structured ordered array by one step based on non‐shadow deposition on a plasma etching‐induced dualistic monolayer colloidal crystal. Such a Au binary‐structure array is built of hexagonally arranged nanoshells and nanorings which stand between two adjacent nanoshells. Six gold nanorings surround each nanoshell. The obtained arrays exhibit both the controllable surface‐plasmon‐resonance (SPR) properties of Au nanoshells and the strong electromagnetic‐field‐enhancement effects of Au nanorings, with the high structural stability of ordered arrays, and show promising potential as the substrate of surface‐enhanced Raman scattering (SERS)‐based devices. The method could also be suitable for fabrication of other material binary‐structured arrays. This study is important in designing and fabricating basal materials for the next generation of multifunctional nanostructured devices.     

Highly controlled surface-enhanced Raman scattering chips using nanoengineered gold blocks

Well defined gold nanostructures of various sizes are fabricated on glass substrates using high-resolution electron-beam lithography/lift-off techniques and detailed surface-enhanced Raman scattering (SERS) properties of crystal violet molecules are studied in order to elucidate electromagnetic (EM) field enhancement effects on the fabricated structures. SERS measurements are performed with high reproducibility using in situ Raman microspectroscopy in aqueous solution. An analysis based on EM theory is performed using field-enhancement factors obtained from finite-difference time-domain (FDTD) simulations and the analysis reproduces experimental results very well. It is noteworthy, furthermore, that the proposed analytic method of EM effects on SERS allows the estimate of the ideal local temperature of gold nanostructures by canceling out the difference in EM field factors at Stokes and anti-Stokes Raman scattering wavelengths. Thus, these experimental results demonstrate that quantitative analysis based on EM theory can be obtained using highly controlled gold nanostructures for SERS measurements with high reproducibility, a result that is promising for the construction of a SERS analysis chip. Although no SERS chip reported so far has been usable for quantitative analysis, this study opens the door for construction of a quantitative SERS chip.     

Double‐Walled Au Nanocage/SiO2 Nanorattles: Integrating SERS Imaging,Drug Delivery and Photothermal Therapy

In this work, a novel type of nanomedical platform, the double‐walled Au nanocage/SiO₂ nanorattle, is successfully fabricated by combining two “hollow‐excavated strategies”—galvanic replacement and “surface‐protected etching”. The rational design of double‐walled nanostructure based on gold nanocages (AuNCs) and hollow SiO₂ shells functionalized respectively with p‐aminothiophenol (pATP) and Tat peptide simultaneously renders the nanoplatforms three functionalities: 1) the whole nanorattle serves as a high efficient drug carrier thanks to the structural characteristics of AuNC and SiO₂ shell with hollow interiors and porous walls; 2) the AuNC with large electromagnetic enhancement acts as a sensitive surface‐enhanced Raman scattering (SERS) substrate to track the internalization process of the nanorattles by human MCF‐7 breast cancer cells, as well as an efficient photothermal transducer for localized hyperthermia cancer therapy due to the strong near‐infrared absorption; 3) Tat‐functionalized SiO₂ shell not only improves biocompatibility and cell uptake efficiency resulting in enhanced anticancer efficacy but also prevents the AuNCs from aggregation and provides the stability of AuNCs so that the SERS signals can be used for cell tracking in high fidelity. The reported chemistry and the designed nanostructures should inspire more interesting nanostructures and applications.     

Multifunctional Silver‐Embedded Magnetic Nanoparticles as SERS Nanoprobes and Their Applications

In this study, surface‐enhanced Raman spectroscopy (SERS)‐encoded magnetic nanoparticles (NPs) are prepared and utilized as a multifunctional tagging material for cancer‐cell targeting and separation. First, silver‐embedded magnetic NPs are prepared, composed of an 18‐nm magnetic core and a 16‐nm‐thick silica shell with silver NPs formed on the surface. After simple aromatic compounds are adsorbed on the silver‐embedded magnetic NPs, they are coated with silica to provide them with chemical and physical stability. The resulting silica‐encapsulated magnetic NPs (M‐SERS dots) produce strong SERS signals and have magnetic properties. In a model application as a tagging material, the M‐SERS dots are successfully utilized for targeting breast‐cancer cells (SKBR3) and floating leukemia cells (SP2/O). The targeted cancer cells can be easily separated from the untargeted cells using an external magnetic field. The separated targeted cancer cells exhibit a Raman signal originating from the M‐SERS dots. This system proves to be an efficient tool for separating targeted cells. Additionally, the magnetic‐field‐induced hot spots, which can provide a 1000‐times‐stronger SERS intensity due to aggregation of the NPs, are studied.     

Gold/palladium and silver/palladium colloids as novel metallic substrates for surface-enhanced Raman scattering

New surface-enhanced Raman scattering (SERS) substrates, composed of gold or silver colloidal nanoparticles doped with palladium, were prepared. These novel colloids are stable and maintain a satisfactory SERS efficiency, even after long aging. The interest in doping the coinage metal nanoparticles with palladium is due to the well-known catalytic activity of this metal. Transmission electron microscopy (TEM) and ultraviolet-visible absorption spectroscopy were used to characterize the shape and size of the metal particles. It was found that these bimetallic colloidal nanoparticles have a core-shell structure, with gold or silver coated with palladium clusters.     

A Fast and Efficient Replacement of CTAB with MUA on the Surface of Gold Nanorods Assisted by a Water‐Immiscible Ionic Liquid

The synthesis and surface modification of gold nanorods (GNRs) is one of the most important and basic issues in nanoscience. Most of the widely investigated GNRs are coated with a cetyltrimethylammonium bromide(CTAB) bilayer. Here, a highly efficient method is proposed to replace CTAB from the surface of GNRs with a bifunctional 11‐mercaptoundecanoic acid in order to decrease the possible toxicity caused by CTAB. This ligand exchange is achieved in a biphasic mixture of an aqueous solution and a water‐immiscible ionic liquid (IL), [BMIM][Tf₂N]. That is, by mixing IL, mercaptoundecanoic acid (MUA)/IL (200 × 10^?3 m ) and a concentrated aqueous solution of GNRs together, followed by vortex stirring for 90 s, CTAB‐capped GNRs with varying aspect ratios can be turned into corresponding MUA‐capped GNRs with the same aspect ratio. Furthermore, the formed MUA‐capped GNRs can be obtained in a large quantity and stored as powders for easy use. The MUA‐capped GNRs with improved biocompatibility and colloidal stability are well suited for further biological functionalization and potential applications. This IL‐assisted ligand exchange can reverse the surface charge, enhance the stability of GNRs, and suppress its cytotoxicity.     

M‐shaped Grating by Nanoimprinting: A Replicable,Large‐Area,Highly Active Plasmonic Surface‐Enhanced Raman Scattering Substrate with Nanogaps

Plasmonic nanostructures separated by nanogaps enable strong electromagnetic‐field confinement on the nanoscale for enhancing light‐matter interactions, which are in great demand in many applications such as surface‐enhanced Raman scattering (SERS). A simple M‐shaped nanograting with narrow V‐shaped grooves is proposed. Both theoretical and experimental studies reveal that the electromagnetic field on the surface of the M grating can be pronouncedly enhanced over that of a grating without such grooves, due to field localization in the nanogaps formed by the narrow V grooves. A technique based on room‐temperature nanoimprinting lithography and anisotropic reactive‐ion etching is developed to fabricate this device, which is cost‐effective, reliable, and suitable for fabricating large‐area nanostructures. As a demonstration of the potential application of this device, the M grating is used as a SERS substrate for probing Rhodamine 6G molecules. Experimentally, an average SERS enhancement factor as high as 5×10⁸ has been achieved, which verifies the greatly enhanced light–matter interaction on the surface of the M grating over that of traditional SERS surfaces.     

Design of Magnetic‐Plasmonic Nanoparticle Assemblies via Interface Engineering of Plasmonic Shells for Targeted Cancer Cell Imaging and Separation

Magnetic‐plasmonic nanoparticles have received considerable attention for widespread applications. These nanoparticles (NPs) exhibiting surface‐enhanced Raman scattering (SERS) activities are developed due to their potential in bio‐sensing applicable in non‐destructive and sensitive analysis with target‐specific separation. However, it is challenging to synthesize these NPs that simultaneously exhibit low remanence, maximized magnetic content, plasmonic coverage with abundant hotspots, and structural uniformity. Here, a method that involves the conjugation of a magnetic template with gold seeds via chemical binding and seed‐mediated growth is proposed, with the objective of obtaining plasmonic nanostructures with abundant hotspots on a magnetic template. To obtain a clean surface for directly functionalizing ligands and enhancing the Raman intensity, an additional growth step of gold (Au) and/or silver (Ag) atoms is proposed after modifying the Raman molecules on the as‐prepared magnetic‐plasmonic nanoparticles. Importantly, one‐sided silver growth occurred in an environment where gold facets are blocked by Raman molecules; otherwise, the gold growth is layer‐by‐layer. Moreover, simultaneous reduction by gold and silver ions allowed for the formation of a uniform bimetallic layer. The enhancement factor of the nanoparticles with a bimetallic layer is approximately 10⁷. The SERS probes functionalized cyclic peptides are employed for targeted cancer‐cell imaging and separation.     

SERS‐Active‐Charged Microgels for Size‐ and Charge‐Selective Molecular Analysis of Complex Biological Samples

Surface‐enhanced Raman scattering (SERS) provides a dramatic increase of Raman intensity for molecules adsorbed on nanogap‐rich metal nanostructures, serving as a promising tool for molecular analysis. However, surface contamination caused by protein adsorption and low surface concentration of small target molecules reduce the sensitivity, which severely restricts the use of SERS in many applications. Here, charged microgels containing agglomerates of gold nanoparticles (Au NPs) are designed using droplet‐based microfluidics to provide a reliable SERS substrate with molecular selectivity and high sensitivity. The limiting mesh size of hydrogel enables the autonomous exclusion of large proteins and the charged matrix concentrates oppositely charged small molecules through electrostatic attraction. As nanogaps among Au NPs in the agglomerates enhance Raman intensity, Raman spectrum of the adsorbed molecules is selectively measured with high sensitivity in the absence of interruption from adhesive proteins. Therefore, the SERS‐active‐charged microgels can be used for direct analysis of pristine biological samples without the pretreatment steps of separation and concentration, which are commonly a prerequisite for Raman analysis. For the purpose of demonstration, a direct detection of fipronil sulfone with partial negative charges, a metabolite of toxic insecticide, dissolved in eggs using the positively charged microgels without any pretreatment of the samples, is shown.     

Bright Surface‐Enhanced Raman Scattering with Fluorescence Quenching from Silica Encapsulated J‐Aggregate Coated Gold Nanoparticles

Plexitonic nanoparticles offer variable optical properties through tunable excitations, in addition to electric field enhancements that far exceed molecular resonators. This study demonstrates a way to design an ultrabright surface‐enhanced Raman spectroscopy (SERS) signal while simultaneously quenching the fluorescence background through silica encapsulation of the semiconductor–metal composite nanoparticles. Using a multistep approach, a J‐aggregate‐forming organic dye is assembled on the surface of gold nanoparticles using a cationic linker. Excitonic resonance of the J‐aggregate–metal system shows an enhanced SERS signal at an appropriate excitation wavelength. Further encapsulation of the decorated particles in silica shows a significant reduction in the fluorescence signal of the Raman spectra (5× reduction) and an increase in Raman scattering (7× enhancement) when compared to phospholipid encapsulation. This reduction in fluorescence is important for maximizing the useful SERS enhancement from the particle, which shows a signal increase on the order of 10⁴ times greater than J‐aggregated dye in solution and 24 times greater than Oxonica S421 SERS tag. The silica layer also serves to promote colloidal stability. The combination of reduced fluorescence background, enhanced SERS intensity, and temporal stability makes these particles highly distinguishable with potential to enable high‐throughput applications such as SERS flow cytometry.     

A new approach to solution-phase gold seeding for SERS substrates

Surface-enhanced Raman scattering (SERS) vastly improves signal-to-noise ratios as compared to traditional Raman scattering, making sensitive assays based upon Raman scattering a reality. However, preparation of highly stable SERS-active gold substrates requires complicated and expensive methodologies and instrumentation. Here, a general and completely solution-phase, seed-based approach is introduced, which is capable of producing gold films for SERS applications on a variety of substrates, not requiring surface modification or functionalization. SERS enhancement factors of ≈10(7) were observed. Moreover, solution-phase gold film deposition on highly complex surfaces, such as protein-coated bioassays, is demonstrated for the first time. Protein bioassays coated with such SERS-active gold films are combined with bioconjugated single-walled carbon nanotube Raman labels, affording highly sensitive detection of the cancer biomarker, carcinoembryonic antigen in serum, with a limit of detection of ≈5 fM (1 pg mL(-1) ).     

Selective Patterning of Gold Surfaces by Core/Shell,Semisoft Hybrid Nanoparticles

The generation of patterned surfaces with well‐defined nano‐ and microdomains is demonstrated by attaching core/shell, semisoft nanoparticles with narrow size distribution to microdomains of a gold‐coated silicon wafer. Near monodisperse nanoparticles are prepared using reversible addition‐fragmentation chain transfer (RAFT) polymerization, initiated from a silica surface, to prepare a polystyrene shell around a silica core. The particles are then used as‐prepared, or after aminolysis of the terminal thiocarbonyl group of the polystyrene shell, to give thiol‐terminated nanoparticles. When gold‐coated silicon wafers are immersed into very dilute suspensions of these particles (as low as 0.004 wt%), both types of particles are shown to adhere to the gold domains. The thiolated particles adhere selectively to the gold microdomains, allowing for microdomain patterning, while particles that contain the trithiocarbonate functionality lead to a much more even coverage of the gold surface with fewer particle aggregations.