Cell Encapsulation in Soft,Anisometric Poly(ethylene) Glycol Microgels Using a Novel Radical‐Free Microfluidic System

Complex 3D artificial tissue constructs are extensively investigated for tissue regeneration. Frequently, materials and cells are delivered separately without benefitting from the synergistic effect of combined administration. Cell delivery inside a material construct provides the cells with a supportive environment by presenting biochemical, mechanical, and structural signals to direct cell behavior. Conversely, the cell/material interaction is poorly understood at the micron scale and new systems are required to investigate the effect of micron‐scale features on cell functionality. Consequently, cells are encapsulated in microgels to avoid diffusion limitations of nutrients and waste and facilitate analysis techniques of single or collective cells. However, up to now, the production of soft cell‐loaded microgels by microfluidics is limited to spherical microgels. Here, a novel method is presented to produce monodisperse, anisometric poly(ethylene) glycol microgels to study cells inside an anisometric architecture. These microgels can potentially direct cell growth and can be injected as rod‐shaped mini‐tissues that further assemble into organized macroscopic and macroporous structures post‐injection. Their aspect ratios are adjusted with flow parameters, while mechanical and biochemical properties are altered by modifying the precursors. Encapsulated primary fibroblasts are viable and spread and migrate across the 3D microgel structure.     

Visual Quantitative Detection of Circulating Tumor Cells with Single‐Cell Sensitivity Using a Portable Microfluidic Device

Immunocytological technologies, molecular technologies, and functional assays are widely used for detecting circulating tumor cells (CTCs) after enrichment from patients' blood sample. Unfortunately, accessibility to these technologies is limited due to the need for sophisticated instrumentation and skilled operators. Portable microfluidic devices have become attractive tools for expanding the access and efficiency of detection beyond hospitals to sites near the patient. Herein, a volumetric bar chart chip (V‐Chip) is developed as a portable platform for CTC detection. The target CTCs are labeled with aptamer‐conjugated nanoparticles (ACNPs) and analyzed by V‐Chip through quantifying the byproduct (oxygen) of the catalytic reaction between ACNPs and hydrogen peroxide, which results in the movement of an ink bar to a concentration‐dependent distance for visual quantitative readout. Thus, the CTC number is decoded into visually quantifiable information and a linear correlation can be found between the distance moved by the ink and number of cells in the sample. This method is sensitive enough that a single cell can be detected. Furthermore, the clinical capabilities of this system are demonstrated for quantitative CTC detection in the presence of a high leukocyte background. This portable detection method shows great potential for quantification of rare cells with single‐cell sensitivity for various applications.     

Preparation of Monodisperse Biodegradable Polymer Microparticles Using a Microfluidic Flow‐Focusing Device for Controlled Drug Delivery

Degradable microparticles have broad utility as vehicles for drug delivery and form the basis of several therapies approved by the US Food and Drug Administration. Conventional emulsion‐based methods of manufacturing produce particles with a wide range of diameters (and thus kinetics of release) in each batch. This paper describes the fabrication of monodisperse, drug‐loaded microparticles from biodegradable polymers using the microfluidic flow‐focusing (FF) devices and the drug‐delivery properties of those particles. Particles are engineered with defined sizes, ranging from 10 µm to 50 µm. These particles are nearly monodisperse (polydispersity index = 3.9%). A model amphiphilic drug (bupivacaine) is incorporated within the biodegradable matrix of the particles. Kinetic analysis shows that the release of the drug from these monodisperse particles is slower than that from conventional methods of the same average size but a broader distribution of sizes and, most importantly, exhibit a significantly lower initial burst than that observed with conventional particles. The difference in the initial kinetics of drug release is attributed to the uniform distribution of the drug inside the particles generated using the microfluidic methods. These results demonstrate the utility of microfluidic FF for the generation of homogenous systems of particles for the delivery of drugs.     

Optofluidic Platform for Real‐Time Monitoring of Live Cell Secretory Activities Using Fano Resonance in Gold Nanoslits

An optofluidic platform for real‐time monitoring of live cell secretory activities is constructed via Fano resonance in a gold nanoslit array. Large‐area and highly sensitive gold nanoslits with a period of 500 nm are fabricated on polycarbonate films using the thermal‐annealed template‐stripping method. The coupling between gap plasmon resonance in the slits and surface plasmon polariton Bloch waves forms a sharp Fano resonance with intensity sensitivity greater than 11 000% per refractive index unit. The nanoslit array is integrated with a cell‐trapping microfluidic device to monitor dynamic secretion of matrix metalloproteinase 9 (MMP‐9) from human acute monocytic leukemia cells in situ. Upon continuous lipopolysaccharide (LPS) stimulation, MMP‐9 secretion is detected within 2 h due to ultrahigh surface sensitivity and close proximity of the sensor to the target cells. In addition to the advantage of detecting early cell responses, the sensor also allows interrogation of cell secretion dynamics. Furthermore, the average secretion per cell measured using our system well matches previous reports while it requires orders of magnitude less cells. The optofluidic platform may find applications in fundamental studies of cell functions and diagnostics based on secretion signals.     

Dynamic Environmental Control in Microfluidic Single‐Cell Cultivations: From Concepts to Applications

Microfluidic single‐cell cultivation (MSCC) is an emerging field within fundamental as well as applied biology. During the last years, most MSCCs were performed at constant environmental conditions. Recently, MSCC at oscillating and dynamic environmental conditions has started to gain significant interest in the research community for the investigation of cellular behavior. Herein, an overview of this topic is given and microfluidic concepts that enable oscillating and dynamic control of environmental conditions with a focus on medium conditions are discussed, and their application in single‐cell research for the cultivation of both mammalian and microbial cell systems is demonstrated. Furthermore, perspectives for performing MSCC at complex dynamic environmental profiles of single parameters and multiparameters (e.g., pH and O₂) in amplitude and time are discussed. The technical progress in this field provides completely new experimental approaches and lays the foundation for systematic analysis of cellular metabolism at fluctuating environments.     

A Radial Flow Microfluidic Device for Ultra‐High‐Throughput Affinity‐Based Isolation of Circulating Tumor Cells

Circulating tumor cells (CTCs) are believed to play an important role in metastasis, a process responsible for the majority of cancer‐related deaths. But their rarity in the bloodstream makes microfluidic isolation complex and time‐consuming. Additionally the low processing speeds can be a hindrance to obtaining higher yields of CTCs, limiting their potential use as biomarkers for early diagnosis. Here, a high throughput microfluidic technology, the OncoBean Chip, is reported. It employs radial flow that introduces a varying shear profile across the device, enabling efficient cell capture by affinity at high flow rates. The recovery from whole blood is validated with cancer cell lines H1650 and MCF7, achieving a mean efficiency >80% at a throughput of 10 mL h^?1 in contrast to a flow rate of 1 mL h^?1 standardly reported with other microfluidic devices. Cells are recovered with a viability rate of 93% at these high speeds, increasing the ability to use captured CTCs for downstream analysis. Broad clinical application is demonstrated using comparable flow rates from blood specimens obtained from breast, pancreatic, and lung cancer patients. Comparable CTC numbers are recovered in all the samples at the two flow rates, demonstrating the ability of the technology to perform at high throughputs.     

Real‐Time Quantification of Cell Internalization Kinetics by Functionalized Bioluminescent Nanoprobes

Cells transport mass dynamically, crossing cell membranes to maintain metabolism and systemic homeostasis, through which biomolecules are also delivered to cells for gene editing, cell reprograming, therapy, and other purposes. Quantifying the translocation kinetics is fundamentally and clinically essential, but remains limited by fluorescence‐based technologies, which are semi‐quantitative and only provide kinetics information at cellular level or in discrete time. Herein, a real‐time method of quantifying cell internalization kinetics is reported using functionalized firefly‐luciferase nanocapsules as the probe. This quantitative assay will facilitate the rational design of delivery vectors and enable high‐throughput screening of peptides and other functional molecules, constituting an effective tool for broad applications, including drug development and cancer therapy.     

Isolation and Profiling of Circulating Tumor‐Associated Exosomes Using Extracellular Vesicular Lipid–Protein Binding Affinity Based Microfluidic Device

Extracellular vesicles (EVs) are emerging as a potential diagnostic test for cancer. Owing to the recent advances in microfluidics, on‐chip EV isolation is showing promise with respect to improved recovery rates, smaller necessary sample volumes, and shorter processing times than ultracentrifugation. Immunoaffinity‐based microfluidic EV isolation using anti‐CD63 is widely used; however, anti‐CD63 is not specific to cancer‐EVs, and some cancers secrete EVs with low expression of CD63. Alternatively, phosphatidylserine (PS), usually expressed in the inner leaflet of the lipid bilayer of the cells, is shown to be expressed on the outer surface of cancer‐associated EVs. A new exosome isolation microfluidic device (^newExoChip), conjugated with a PS‐specific protein, to isolate cancer‐associated exosomes from plasma, is presented. The device achieves 90% capture efficiency for cancer cell exosomes compared to 38% for healthy exosomes and isolates 35% more A549‐derived exosomes than an anti‐CD63‐conjugated device. Immobilized exosomes are then easily released using Ca²⁺ chelation. The recovered exosomes from clinical samples are characterized by electron microscopy and western‐blot analysis, revealing exosomal shapes and exosomal protein expressions. The ^newExoChip facilitates the isolation of a specific subset of exosomes, allowing the exploration of the undiscovered roles of exosomes in cancer progression and metastasis.     

Label‐Free Optofluidic Nanobiosensor Enables Real‐Time Analysis of Single‐Cell Cytokine Secretion

Single‐cell analysis of cytokine secretion is essential to understand the heterogeneity of cellular functionalities and develop novel therapies for multiple diseases. Unraveling the dynamic secretion process at single‐cell resolution reveals the real‐time functional status of individual cells. Fluorescent and colorimetric‐based methodologies require tedious molecular labeling that brings inevitable interferences with cell integrity and compromises the temporal resolution. An innovative label‐free optofluidic nanoplasmonic biosensor is introduced for single‐cell analysis in real time. The nanobiosensor incorporates a novel design of a multifunctional microfluidic system with small volume microchamber and regulation channels for reliable monitoring of cytokine secretion from individual cells for hours. Different interleukin‐2 secretion profiles are detected and distinguished from single lymphoma cells. The sensor configuration combined with optical spectroscopic imaging further allows us to determine the spatial single‐cell secretion fingerprints in real time. This new biosensor system is anticipated to be a powerful tool to characterize single‐cell signaling for basic and clinical research.     

Formation of Bubbles in a Multisection Flow‐Focusing Junction

The formation of bubbles in a flow‐focusing (FF) junction comprising multiple rectangular sections is described. The simplest junctions comprise two sections (throat and orifice). Systematic investigation of the influence on the formation of bubbles of the flow of liquid and the geometry of the junction identifies regimes that generate monodisperse, bidisperse, and tridisperse trains of bubbles. The mechanisms by which these junctions form monodisperse and bidisperse bubbles are inferred from the shapes of the gas thread during breakup: these mechanisms differ primarily by the process in which the gas thread collapses in the throat and/or orifice. The dynamic self‐assembly of bidisperse bubbles leads to unexpected groupings of bubbles during their flow along the outlet channel.     

Microfluidic‐Based Approaches in Targeted Cell/Particle Separation Based on Physical Properties: Fundamentals and Applications

Cell separation is a key step in many biomedical research areas including biotechnology, cancer research, regenerative medicine, and drug discovery. While conventional cell sorting approaches have led to high‐efficiency sorting by exploiting the cell's specific properties, microfluidics has shown great promise in cell separation by exploiting different physical principles and using different properties of the cells. In particular, label‐free cell separation techniques are highly recommended to minimize cell damage and avoid costly and labor‐intensive steps of labeling molecular signatures of cells. In general, microfluidic‐based cell sorting approaches can separate cells using “intrinsic” (e.g., fluid dynamic forces) versus “extrinsic” external forces (e.g., magnetic, electric field, etc.) and by using different properties of cells including size, density, deformability, shape, as well as electrical, magnetic, and compressibility/acoustic properties to select target cells from a heterogeneous cell population. In this work, principles and applications of the most commonly used label‐free microfluidic‐based cell separation methods are described. In particular, applications of microfluidic methods for the separation of circulating tumor cells, blood cells, immune cells, stem cells, and other biological cells are summarized. Computational approaches complementing such microfluidic methods are also explained. Finally, challenges and perspectives to further develop microfluidic‐based cell separation methods are discussed.