Silk is a widely available, edible, biocompatible, and environmentally sustainable natural material. Particulate matter (PM) pollution has drawn considerable attention because it is a serious threat to public health. Herein, we report a human-friendly silk nanofiber air filter, which exhibits superior filtration efficiency for both PM2.5 and submicron particles with obviously low pressure drop and low basis weight compared to typical commercial microfiber air filters. Additionally, other functions such as antibacterial activity could be easily integrated into the silk nanofiber air filters, enabling the fabrication of multifunctional air filters. All the above characteristics, combined with the natural abundance and biocompatibility of silk, suggest a great potential for the use of silk nanofibers as air filters, especially as comfortable and personal air purifiers.
In-plane symmetry is an important contributor to the physical properties of two-dimensional layered materials, as well as atomically thin heterojunctions. Here, we demonstrate anisotropic/isotropic van der Waals (vdW) heterostructures of ReS2 and MoS2 monolayers, where interlayer coupling interactions and charge separation were observed by in situ Raman-photoluminescence spectroscopy, electrical, and photoelectrical measurements. We believe that these results could be helpful for understanding the fundamental physics of atomically thin vdW heterostructures and creating novel electronic and optoelectronic devices.
The size and density of Ag nanoparticles on n-layer MoS2 exhibit thicknessdependent behavior. The size and density of these particles increased and decreased, respectively, with increasing layer number (n) of n-layer MoS2. Furthermore, the surface-enhanced Raman scattering (SERS) of Ag on this substrate was observed. The enhancement factor of this scattering varied with the thickness of MoS2. The mechanisms governing the aforementioned thickness dependences are proposed and discussed.
Multi-shelled CoFe2O4 hollow microspheres with a tunable number of layers (1–4) were successfully synthesized via a facile one-step method using cyclodextrin as a template, followed by calcination. The structural features, including the shell number and shell porosity, were controlled by adjusting the synthesis parameters to produce hollow spheres with excellent capacity and durability. This is a straightforward and general strategy for fabricating metal oxide or bimetallic metal oxide hollow microspheres with a tunable number of shells.
We demonstrate an easy and scalable low-temperature process to convert porous ternary complex metal oxide nanoparticles from solution-synthesized core/shell metal oxide nanoparticles by thermal annealing. The final products demonstrate superior electrochemical properties with a large capacity and high stability during fast charging/discharging cycles for potential applications as advanced lithium-ion battery (LIB) electrode materials. In addition, a new breakdown mechanism was observed on these novel electrode materials.
Bismuth telluride (Bi2Te3) is one of the most important commercial thermoelectric materials. In recent years, the discovery of topologically protected surface states in Bi chalcogenides has paved the way for their application in nanoelectronics. Determination of the fracture toughness plays a crucial role for the potential application of topological insulators in flexible electronics and nanoelectromechanical devices. Using depth-sensing nanoindentation tests, we investigated for the first time the fracture toughness of bulk single crystals of Bi2Te3 topological insulators, grown using the Bridgman-Stockbarger method. Our results highlight one of the possible pitfalls of the technology based on topological insulators.
In this study, a potentially universal new strategy is reported for the large-scale, low-cost fabrication of visible-light-active highly ordered heteronanostructures based on the spontaneous photoelectric-field-enhancement effect inherent in pyramidal morphology. The hierarchical vertically oriented arrayed structures comprise an active molecular co-catalyst at the apex of a visible-light-active large band gap semiconductor for low-cost solar water splitting in a neutral aqueous medium without the use of a sacrificial agent.
Copper sulfide (Cu7S4) nanoparticles coated with an ultra-high payload (~5.0 × 107 fluorine atoms per particle) of fluorinated ligands (oleylamine functionalized 3,5-bis(trifluoromethyl)benzaldehyde, 19FOAm) exhibited a single intense 19F magnetic resonance (MR) signal and efficient near infrared photothermal performance in water medium. In vivo assessment revealed strong 19F MR signals at cancerous lesions and effective inhibition of tumor growth after photothermal treatment, indicating the great potential of these fabricated nanoprobes for simultaneous 19F MR imaging and photothermal therapy.
Manipulating the alignment of liquid crystals (LCs) is a hot and fundamental issue for their applications in block copolymers, photonics, actuators, biosensors, and liquid-crystal displays. Here, the surface characteristic of Cu2O nanocrystals was well controlled to manipulate the orientation of the LCs. The mechanism of the orientation of the LCs induced by Cu2O nanocrystals was elucidated based on the interaction between the LCs and Cu2O nanocrystals. To comprehensively prove our assumption, different types of LCs (nematic, cholesteric, and smectic) as well as the same type of LCs with different polarities were selected in our system. Moreover, the photomechanical behaviors of the LC polymer composites demonstrated that the alignment of LCs can be effectively manipulated using Cu2O nanocrystals.
Yolk–shell architectures have attracted extensive attention owing to their unique structure and infusive applications. MoS2 is regarded as one of the most promising catalytic materials for hydrogen evolution by the splitting of water. In this work, a simple self-template solvothermal approach is developed for the synthesis of novel MoS2 yolk–shell microspheres with a hierarchical porous structure by reacting MoO2 microspheres with L-cysteine. A dissolutionrecrystallization formation mechanism is proposed for the MoS2 yolk–shell microspheres. Owing to structural superiority, the new material architecture exhibits improved photoelectrochemical properties, including efficient hydrogen evolution reaction catalytic activities, a high photocurrent density, a small overpotential, and a low charge-transfer resistance.
The persistent need for a sustainable energy economy has led researchers to focus on novel energy conversion and storage technologies, inspiring the discovery of smart material designs such as hierarchical nanocomposites. These nanocomposites have proven effective in the advancement of energy-based technologies. The synergistic properties of hierarchical nanocomposites composed of two types of two-dimensional layered materials, layered double hydroxides and graphene, have resulted in improved electrochemical as well as photocatalytic performance. Synthetic strategies and their effect on the electrochemical and photocatalytic performance of these nanocomposites as high-performance supercapacitors and water oxidation catalysts are discussed in detail in this review.
Sandwich structured graphene-wrapped FeS-graphene nanoribbons (G@FeS-GNRs) were developed. In this composite, FeS nanoparticles were sandwiched between graphene and graphene nanoribbons. When used as anodes in lithium ion batteries (LIBs), the G@FeS-GNR composite demonstrated an outstanding electrochemical performance. This composite showed high reversible capacity, good rate performance, and enhanced cycling stability owing to the synergy between the electrically conductive graphene, graphene nanoribbons, and FeS. The design concept developed here opens up a new avenue for constructing anodes with improved electrochemical stability for LIBs.
Developing efficient water-splitting electrocatalysts, particularly for the anodic oxygen evolution reaction (OER), is an important challenge in energy conversion technologies. In this study, we report the development of iron-doped nickel disulfide nanoarray on Ti mesh (Fe0.1-NiS2 NA/Ti) via the sulfidation of its nickel–iron-layered double hydroxide precursor (NiFe-LDH NA/Ti). As a three-dimensional OER anode, Fe0.1-NiS2 NA/Ti exhibits remarkable activity and stability in 1.0 M KOH, with the requirement of a low overpotential of 231 mV to achieve 100 mA·cm?2. In addition, it exhibits excellent activity and durability in 30 wt.% KOH. Notably, this electrode is also efficient for the cathodic hydrogen evolution reaction under alkaline conditions.
A new type of lead-free, formamidinium (FA)-based halide perovskites, FASnI2Br, are investigated as light-harvesting materials for low-temperature processed p–i–n heterojunction solar cells with different configurations. The FASnI2Br perovskite, with a band-gap of 1.68 eV, exhibits optimal photovoltaic performance after low-temperature annealing at 75 °C. By using C60 as electron-transport layer, the device yields a hysteresis-less power conversion efficiency of 1.72%. The possible use of an inorganic MoOx film as a new type of independent hole-transport layer for the present tin-based perovskite solar cells is also demonstrated.
RuCu nanocages and core–shell Cu@Ru nanocrystals with ultrathin Ru shells were first synthesized by a one-pot modified galvanic replacement reaction. The construction of bimetallic nanocrystals with fully exposed precious atoms and a high surface area effectively realizes the concept of high atom-efficiency. Compared with the monometallic Ru/C catalyst, both the RuCu nanocages and Cu@Ru core–shell catalysts supported on commercial carbon show superior catalytic performance for the regioselective hydrogenation of quinoline toward 1,2,3,4-tetrahydroquinoline. RuCu nanocages exhibit the highest activity, achieving up to 99.6% conversion of quinoline and 100% selectivity toward 1,2,3,4-tetrahydroquinoline.
Recently, the synthesis of ultrathin nanostructures has attracted increasing interest because of their unique structure and properties. In this work, we report the synthesis of sub-2.0-nm Ru and composition-tunable RuPt nanowire networks using an environmentally friendly aqueous method. The structures were characterized using transmission electron microscopy (TEM), high-resolution TEM, X-ray diffraction (XRD), and energy-dispersive X-ray (EDX) spectroscopy. Moreover, the combined utilization of sodium n-dodecyl sulfate and potassium fluoride was determined to play a key role in the formation of these ultrathin nanostructures. The electrocatalytic properties of the sub-2.0-nm RuPt nanowire networks were investigated for methanol oxidation in an acidic medium. The nanostructures displayed composition-dependent properties, and compared with commercial Ru50Pt50/C, the as-synthesized Ru56Pt44 ultrathin nanowire network exhibited enhanced stability.
By means of vibrational spectroscopy and density functional theory (DFT), we investigate CO adsorption on phosphorene-based systems. We find stable CO adsorption at room temperature on both phosphorene and bulk black phosphorus. The adsorption energy and vibrational spectrum are calculated for several possible configurations of the CO overlayer. We find that the vibrational spectrum is characterized by two different C–O stretching energies. The experimental data are in good agreement with the prediction of the DFT model and reveal the unusual C–O vibrational band at 165–180 meV, activated by the lateral interactions in the CO overlayer.
The present study explored a new method to improve the catalytic activity of non-precious metals, especially in electrochemical reactions. Highly ionized Fe plasma produced by arc discharge was uniformly deposited on a porous carbon substrate and formed atomic clusters on the carbon surface. The as-prepared FeOx/C material was tested as a cathode material in a rechargeable Li–O2 battery under different current rates. The results showed significant improvement in battery performance in terms of both cycle life and reaction rate. Furthermore, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results showed that the as-prepared cathode material stabilized the cathode and reduced side reactions and that the current rate was a critical factor in the nucleation of the discharge products.
Scanning tunneling microscopy (STM) can be used to image individual biological molecules, such as proteins, in vacuum or air. This requires sample dehydration and thus may not reflect the native state of the molecule. Extensive efforts have been made to image single proteins in solution using STM; however, the images have revealed only round or oval shapes with no sub-molecular details. Here, we present the sub-molecular features of streptavidin proteins under physiological conditions using a homebuilt low-leakage-current and highstability liquid phase STM. The N-lobe, C-lobe, and C-terminal tail of the epidermal growth factor receptor kinase domains were also resolved in solution. Our results demonstrate that the structure, morphology, and dynamics of a protein molecule can be examined under physiological conditions by the STM.
Mesoporous Au films consisting of a network of interconnected Au ligaments around ultra-large pores were found to exhibit a promising electrocatalytic activity towards sluggish reactions. Mesoporous Au films with pore sizes up to 25 nm were successfully fabricated using a polymeric micelle approach. A superior catalytic activity of the mesoporous Au films towards methanol oxidation was confirmed, which was thoroughly analyzed and compared with that of other Au materials. An intrinsic investigation on the high catalytic activity revealed that the superior performance of the as-prepared mesoporous Au film was related to its unique atomic structures around the mesopores with well-crystallized facets and several step/kink sites on the Au surfaces. These findings showcase a strategic and feasible design for preparing highly active Au-based catalysts that could be used as promising candidates in electrocatalytic applications.
