首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
吴锦武  张加林  姜哲  王云 《振动与冲击》2008,27(1):104-106,110
以固定支撑板为例,提出一种阵列式压电式传感器的设计方法测量前三阶声辐射模态幅值.在振动板表面布置一组形状相同的矩形PVDF(Polyvinylidene fluoride聚偏氟乙烯)薄膜作为传感器,根据所需要的声辐射模态伴随系数,通过对PVDF传感器阵列输出信号设计的加权系数,使PVDF传感器阵列输出信号为相应的声辐射模态伴随系数.结果表明这种PVDF传感器阵列设计与外激励力性质(如激励力类型、频率以及位置)无关,而且适用任意边界条件板结构.  相似文献   

2.
基于PVDF压电传感器测量振动结构体积位移   总被引:1,自引:0,他引:1  
控制振动板结构的体积位移是降低结构总声功率的一种有效策略。本文以工程常见四端位移为零的振动板为例,提出一种新的压电式传感器的设计方法测量体积位移。利用正弦函数展开近似表示固定板振动位移,通过设计特殊形状的PVDF压电薄膜,使PVDF输出信号为所需要的振动结构体积位移。结果表明这种体积位移传感器不仅适用四边简支、四边固定以及介于两者之间的边界条件板结构,而且作为一种误差传感器测量振动结构体积位移是可行的。并对实验数据进行了分析比较。  相似文献   

3.
以阶梯梁为例,通过一组阵列式压电薄膜(Polyvinylidene fluoride,PVDF)测量阶梯梁的体积位移。在梁表面均匀布置一组相同形状的矩形PVDF阵列,通过测量PVDF与激励力之间的频率响应函数,然后利用伪逆方法结合截断奇异值法(The truncated singular value decomposition,TSVD)设计这组PVDF阵列的加权系数,从而得到阶梯梁体积位移。实验结果表明,该方法能够准确测量到阶梯梁的体积位移,具有不需计算结构模态、附加质量小、与激励力位置无关等优点。  相似文献   

4.
以两端固支阶梯梁为例,通过高分子压电薄膜(Poly Vinyli Dene Fluoride,PVDF)传感器阵列测量其模态坐标。在该阶梯梁表面均匀黏贴一组相同形状的矩形PVDF薄膜,首先通过实验方法直接测得该阶梯梁的曲率模态,然后把曲率模态作为这组PVDF输出信号的加权因数,从而得到所需的模态坐标。实验结果表明,这种传感器设计方法是可行的,并且PVDF阵列式模态传感器具有在不均匀梁结构表面布置方便,能准确、方便的测出实验曲率模态,不受激励力位置影响,滤波效果好等优点。  相似文献   

5.
以不同边界条件的振动梁为例,提出通过分部积分方法设计特定形状的PVDF薄膜测量体积位移。这种分部积分方法得到的PVDF传感器形状不但与外激励力的性质(如激励力类型、位置以及频率等)无关,而且不需要振动梁的模态信息。研究表明,可以把振动梁的边界条件分为两类,即一端固定一端任意和两端位移为零,对于每一类边界条件可以用一种特定形状PVDF传感器测量其体积位移。  相似文献   

6.
以不同边界条件的振动梁为例,本文提出通过分部积分方法设计特定形状的PVDF薄膜测量体积位移。这种分部积分方法得到的PVDF传感器形状不但与外激励力的性质(如激励力类型、位置以及频率等)无关,而且不需要振动梁的模态信息。研究表明,可以把振动梁的边界条件分为两类,即一端固定一端任意和两端位移为零,对于每一类边界条件可以用一种特定形状PVDF传感器测量其体积位移。  相似文献   

7.
提出一种新的基于实验模态分析的阵列式压电模态传感器设计方法。首先利用PVDF阵列进行实验模态分析得到结构的曲率模态,然后直接将曲率模态振型函数在相应测量点的幅值作为加权系数,对结构进行模态滤波,得到各阶模态坐标,并加以实验验证。研究发现,利用该方法设计阵列式压电模态传感器是可行的,而且该方法不需要进行复杂的数值计算,操作简单,模态滤波效果良好,可以很容易推广到二维复杂结构,具有较好的工程应用前景。  相似文献   

8.
朱利锋  姜哲 《噪声与振动控制》2007,27(6):127-130,133
介绍了一种设计体积速度传感器的新方法。设计策略为将PVDF压电薄膜黏结到结构表面上,两维振动结构的表面振速用Legendre多项式展开,利用两维分布式传感器压电方程,设计PVDF薄膜的形状,使传感器的输出电荷量正比于两维结构的体积速度。这样设计得到的传感器,其输出信号的实时性得到了保证,并且适用于任意边界条件,能测量振动结构的局部体积速度,拓宽了其应用范围。此外,还以简支板及其局部区域为例,通过数值计算,验证了设计方法的可行性。  相似文献   

9.
MEMS三维微触觉力传感器标定方法   总被引:1,自引:0,他引:1  
针对一种微机电系统(micro electro mechanical system,MEMS)三维微触觉力传感器,采用悬臂梁弯曲变形获得了标准微小力信号,通过测量传感器敏感梁弹性导致的传感器测杆的微小位移量,对标定过程中的误差进行了补偿,实现了三维微触觉力传感器的精确标定.建立了MEMS三维微触觉力传感器标定系统,对悬臂梁的弹性系数进行了标定,对传感器测头输出的微小电压信号设计了线性化的信号调理电路.标定过程中考虑了由于传感器敏感梁弹性变形导致的传感器测杆的微小位移量对标定精度的影响.采用高精度的纳米测量机(nano-measuring machine,NMM)对传感器测杆的位移特性进行测量,利用该参数对传感器的力特性系数进行误差补偿,最后根据传感器输出的初始电压和力特性系数建立了传感器的力特性输出方程.  相似文献   

10.
以简支矩形薄板为研究对象,首先在波数域内对结构振动体积速度与辐射声功率的关系进行分析,推导出反映结构模态对体积速度贡献规律的数学表达式.在此基础上,结合PVDF压电薄膜的电荷输出方程,利用三角函数的正交性,给出一种新方法来设计体积速度传感器,并针对具体模型进行了结构体积速度测量实验研究.结果表明,所设计的分布式体积速度传感器具有较好的传感精度,进而说明了方法的正确性.同时还发现PVDF压电薄膜制作工艺与粘贴位置的偏差对其传感精度在一定频带内有较大影响,并且对不同位置激励下传感的影响程度不同.  相似文献   

11.
A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling.  相似文献   

12.
An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate agreement is demonstrated between the derived relations and experimental data.  相似文献   

13.
An analysis of anisotropy of the properties of a Bi2Se0.3Te2.7 solid solution was carried out using construction of demonstrative surfaces for thermoelectric effectiveness and thermal expansion coefficients. It is shown that the texture is an important factor forming anisotropy of properties and technological fitness of ingots for manufacturing modules. Anisotropy of properties based on the studies of the ingot textures obtained using the float-zone method and Bridgman method (growing thermoelectric plates in a flat cavity) was studied.  相似文献   

14.
A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue.  相似文献   

15.
16.
Australia has several uranium mines and a large number of mineral sand mines, with associated processing facilities. Exposures resulting from these mining and processing operations usually involve intakes of mixtures of radionuclides. This work describes the development of a suite of first order, linear compartment models, based on the ICRP Publication 66 respiratory tract model, and an analytical solution to the decay equations, for assessing the consequences of such intakes. The computer programs based on these models directly compute excretion, organ retention and organ and whole-body doses for intakes of either single radionuclides or any mixture of radionuclides belonging to the same radioactive decay chain. The intake can be via inhalation, ingestion or injection, and can be acute, chronic or of limited duration. The starting concentration and degree of secular (dis)equilibrium can be specified for each radionuclide. No assumptions need to be made about the relative magnitudes of the radioactive half-lives of the different nuclides.  相似文献   

17.
18.
19.
可燃气体检测报警器测量结果的不确定度评定   总被引:1,自引:0,他引:1  
本文详细介绍了可燃气体检测报警器示值误差测量结果的不确定度评定方法。  相似文献   

20.
水三相点是开尔文热力学温度的唯一基准点,也是ITS-90国际温标重要的定义固定点。因此,水三相点不确定度分析对整个温标的建立、温度量值传递起着至关重要的作用。近3年来,中国计量科学研究院研制出一系列高质量的水三相点容器,加强了水三相点的研究,为不确定度的分析提供了更为可靠的实验依据。同时,不确定度的分析也是客观评价新研制容器性能的一个重要指标。因此,根据实验结果对新研制容器所复现的水三相点进行了不确定度评定。评定结果表明,其扩展不确定度为0.16mK(k=2.69,P=0.99)。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号