共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
华东医院王鸣鹏编著的《实用CT检查技术学》已由科学技术文献出版社正式出版发行。该书着重于临床应用和实用性,并以较多篇幅介绍了最近几年CT技术的发展、螺旋CT的原理和三维成像方法,以及CT扫描机的影像质量控制。其主要章节如下:CT机的基本原理和结构;CT检查技术基础;人体各部位CT扫描技术;螺旋CT扫描技术和检查方法;螺旋CT的三维成像方法和原理;CT的照相设备、胶片及胶片的处理;CT扫描的影像质量控制等。该书可作为放射诊断医、技师的参考书,也可作为放射专业大、中专的教科书。目前,全国各大新华书店… 相似文献
3.
版材的成像性能会因许多条件而发生一定程度的改变,诸如版材不同批次间本身敏感度的差异、周围环境温度、储存时间及条件、显影冲洗、以及激光光源的衰减等等。受益的,CTP系统保持精确成像的稳定性越好,后续印刷所需进行的调整越少。在此意义上,应用了方形激光点技术的热敏CTP系统是最好的解决方案,因为它从根本上避免了因版材、环境条件的变化对最终成像的网点数据的影响。版材的成像性能因上述环境条件的变化而产生的变化通常可达±10%,绝大多数的版材不同批次及储存时间的不同都可产生这种程度的变化,环境温度等条件的变… 相似文献
4.
5.
本文阐述了应用螺旋CT成像技术于泌尿器官的研究,包括贤脏,膀胱,输尿道等。结果表明这种新技术对于精确诊断这些器官的病变能提供可靠的影像数据而不会对病人产生创伤。 相似文献
6.
1.前言医用X线胶片是感光材料的大类产品,它占我国感光材料产量的比例为17%~18%,而占卤化银感光材料的比例为40%左右,这个比例大体与世界感光材料产量中X线胶片所占比例相当。随着先进的成像技术——计算机断层摄影技术(CT)、磁共振成像技术(MRI... 相似文献
7.
8.
CT机成像性能检测模体的研制 总被引:1,自引:0,他引:1
通过对AAPM模体Catphan模体和Stemens(西门子)、GE(通用电器)、Philips(菲利浦)等公司质控模体的分析与研究,取长补短,参考AAPM的1号报告、39号报告,依据IEC1223-2-6标准进行设计加工,研制出能检测各种型号CT机成像性能的模体。模体结构紧凑,模块布置合理,加工精细,能检测空间分辨力、低对比度分辨力、层厚和CTDI(CT剂量指数)等12个性能参数。可用于CT机验收测试和QA(质量评价)测试。 相似文献
9.
10.
美国标准与测试技术研究院的科学家和某大学的研究人员共同合作最近将一种新的成像技术应用于聚合复合物微细结构及其缺陷的无损测定。此项名为光学相干层析X射线摄影法(OCT)的新方法是以物体扩散出的短光脉冲干涉测量分析为基础。在此之前,研究人员已在大学里研制... 相似文献
11.
12.
声衍射层析成像研究进展 总被引:1,自引:0,他引:1
在计算机层析成像中用声波或电磁波取代X射线照射目标时波长不能再看作无限小,需要将Fourier切片定理修改为Fourier衍射投影定理,基于射线的CT相应地推广为衍射CT。概述了近年来衍射CT的发展,特别是声衍射CT。在理论和算法方面讨论了非均匀Fourier变换算法及其实现、仅根据强度信息的图像重建方法、多频率入射的情况、不完整测量数据条件下的图像重建等问题。此外还扼要介绍了不同领域中衍射CT的研究和应用情况。 相似文献
13.
14.
15.
16.
17.
Terahertz (THz) tomography is a rather novel technique for non-destructive testing that is particularly suited for the testing of plastics and ceramics. Previous publications showed a large variety of conventional algorithms adapted from computed tomography or ultrasound tomography which were directly applied to THz tomography. Conventional algorithms neglect the specific nature of THz radiation, i.e. refraction at interfaces, reflection losses and the beam profile (Gaussian beam), which results in poor reconstructions. The aim is the efficient reconstruction of the complex refractive index, since it indicates inhomogeneities in the material. A hybrid algorithm has been developed based on the algebraic reconstruction technique (ART). ART is adapted by including refraction (Snell’s law) and reflection losses (Fresnel equations). Our method uses a priori information about the interface and layer geometry of the sample. This results in the ‘Modified ART for THz tomography’, which reconstructs simultaneously the complex refractive index from transmission coefficient and travel time measurements. 相似文献
18.
Tao Zhang Eric Maire Jerome Adrien Patrick R. Onck Luc Salvo 《Advanced Engineering Materials》2013,15(8):767-772
As one of the most important analysis techniques for non‐destructive imaging, X‐ray tomography has been widely used in materials science, medical science, and industry to evaluate the behavior of porous materials. By using this method, a three dimensional volume can be inspected in order to visualize in situ the progress of damage in materials and this can be analyzed qualitatively and quantitatively. In the present study, we have used X‐ray tomography to investigate the fracture behavior of an ERG open cell aluminum foam. The process of damage development of a sample undergoing tension and the relation between the inter‐metallics and the cracks can be observed totally by the X‐ray tomography set‐up. Local tomography has in particular been used to image the microstructure at high resolution. A finite element model has also been developed in order to simulate this process of the damage using the 3D data obtained by the tomography. 相似文献
19.