首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
高温环境下MEMS微构件动态特性测试技术研究   总被引:1,自引:1,他引:0  
基于放电激励方法建立了高温环境下MEMS微构件动态特性测试系统,该系统主要由激励装置、激光多普勒测振仪、微构件温度控制系统组成.激励装置利用尖端放电产生的激波激励微构件,通过进给机构调节电极间距以改变激励能量.激励底座是用高温胶粘接而构成的多层结构,包括微构件安装板、十字载台、陶瓷绝缘片和板电极.微构件胶粘在底座上,其振动响应信号由多普勒测振仪测量,计算机对测量数据频谱分析后得到谐振频率.编写了基于LabVIEW的微构件温度控制软件,控制测试时温度.利用该测试系统,测试了微构件在室温~500℃环境下的谐振频率,得到了谐振频率随温度变化规律.  相似文献   

2.
频闪白光干涉技术(SWLI)能够对被测系统进行动态模式的重建和表征,在微机电系统(MEMS)或微光机电系统(MOEMS)等振动样品测量中具有很高的实用性。传统频闪方法不能预先检测或分析具有单个振动激励源的微结构,而频闪白光干涉技术则解决了这一问题。为了全面了解这一新开发的技术,本文介绍了理论、技术方法和该技术各种应用的实验结果及分析。该技术为MEMS、MOEMS甚至微纳尺度生物体动态行为的重建和分析提供了一种有效的方法。实验结果和分析表明所开发的技术在实际应用中具有良好的可行性和准确性。  相似文献   

3.
本文阐述了飞秒激光微精细加工技术的原理特点,在微机械和微光学中的应用,及其在加工研究中取得的一些进展;提出一种基于计算机视觉、显微干涉及激光多普勒的 MEMS 的动态测试技术,实现 MEMS 器件平面运动幅度的快速测量、平面和离面运动的测量和离面运动的瞬态测量。  相似文献   

4.
本文阐述了飞秒激光微精细加工技术的原理特点,在微机械和微光学中的应用,及其在加工研究中取得的一些进展;提出一种基于计算机视觉、显微干涉及激光多普勒的MEMS的动态测试技术,实现MEMS器件平面运动幅度的快速测量、平面和离面运动的测量和离面运动的瞬态测量。  相似文献   

5.
结合微机械陀螺仪和隧道效应的特点,提出了角振动微机械隧道陀螺仪的工作原理和结构设计方案。针对微机械陀螺的驱动和检测在面内和面外的结构特点,制定了图像处理法、静电力阶跃激励法和机械激励法等振动特性测试方法,在大气环境下分别对隧道陀螺仪驱动和检测模态的振动特性进行了测试,得到了相应的谐振频率,采用不同的方法得到的结果基本一致。  相似文献   

6.
频闪干涉仪在微机电系统动态表征中的应用   总被引:3,自引:0,他引:3  
微机电系统(MEMS)测试的主要目的是为工程开发中的设计和模拟过程提供数据反馈,其中一个重要方面就是MEMS器件动态特性的高速可视化.介绍了一种基于计算机控制的频闪干涉测试系统,用来测量可动MEMS器件的离面运动,实现了纳米级分辨力,该系统采用改进的相移干涉算法,使用一个大功率激光二极管(LD)作为频闪照明的光源,可以实现1MHz范围内大幅值(十几微米)的微运动测量,这种高离面灵敏度的测量方法特别适合进行微机械(光学)元件的动态特性测量.通过研究一个多晶硅微谐振器的动态特性说明了系统的强大功能。  相似文献   

7.
鉴于三维形貌在微机电系统(MEMS)测试领域的重要地位及显微干涉法在光学计量领域的高精度性能,开展了显微干涉法在MEMS结构三维形貌测试中的应用研究.基于小波变换极高的去噪性能及处理无载波条纹的优点,包裹相位采用连续小波变换的方法提取.基于展开相位拐点与符号歧义点的单应性,开展了通过检测展开相位拐点并对展开相位进行校正的方法恢复非单调条纹图的真实相位的研究.采用上述方法,成功测试了微梁的静、动态三维形貌及手机芯片的翘曲变形.该项研究为MEMS结构的三维形貌测试提供了高精度且简单快速的测量手段.  相似文献   

8.
频闪白光干涉技术(SWLI)能够对被测系统进行动态模式的重建和表征,在微机电系统(MEMS)或微光机电系统(MOEMS)等振动样品测量中具有很高的实用性。传统频闪方法不能预先检测或分析具有单个振动激励源的微结构,而频闪白光干涉技术则解决了这一问题。为全面了解这一新开发的技术,本文从理论、技术方法和该技术各种应用的实验结果及分析进行了介绍。该技术为MEMS,MOEMS甚至微纳尺度生物体动态性能的重建和分析提供了一种有效的方法。实验结果和分析证明了频闪白光干涉技术在实际应用中具有良好的可行性和准确性。  相似文献   

9.
基于机器微视觉的微机电系统(MEMS)动态测试系统,提出了一种分形小波变换亚像素检测技术提取MEMS运动轨迹算法.该算法结合电耦合器件(CCD)成像机理,利用图像的分形参数进行随机分形插值对图像边缘进行重建,通过小波变换实现重建后图像亚像素精度的边缘检测.在连续光照明条件下,对MEMS平面微运动模糊图像进行检测处理,提取和分析了MEMS运动轨迹.将该方法和在频闪条件下测得的MEMS器件的平面微运动幅值的结果进行了比对分析和讨论.由实验结果可以看出,本方法有较高的测量精度,其测量绝对误差小于0.02像素.  相似文献   

10.
首先介绍了两种结构完全对称的高灵敏度的摇摆质量陀螺.设计并制作了一种对角驱动的新型摇摆质量微陀螺.利用硅的各向异性湿法腐蚀等MEMS体加工技术,简化了该微陀螺的制作工艺.该微结构的对称性、一致性和加工精度有很大改善,尤其是振动梁、激励部件和敏感部件等关键部件.详细阐述了该微陀螺的工作原理和结构设计,完成了微陀螺关键部件的制作和样机组装.利用NF公司的FRA 5087频率响应分析仪测试了样机大气下的振动模态,其中驱动频率为5.563 2 kHz,检测频率为5.553 4 kHz,频差为9.8 Hz,小于0.2%.利用频谱分析的方法测试了样机的哥氏力.测试结果表明这种摇摆质量微陀螺的设计与制作方法是可行的.  相似文献   

11.
A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling.  相似文献   

12.
An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate agreement is demonstrated between the derived relations and experimental data.  相似文献   

13.
An analysis of anisotropy of the properties of a Bi2Se0.3Te2.7 solid solution was carried out using construction of demonstrative surfaces for thermoelectric effectiveness and thermal expansion coefficients. It is shown that the texture is an important factor forming anisotropy of properties and technological fitness of ingots for manufacturing modules. Anisotropy of properties based on the studies of the ingot textures obtained using the float-zone method and Bridgman method (growing thermoelectric plates in a flat cavity) was studied.  相似文献   

14.
A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue.  相似文献   

15.
16.
Australia has several uranium mines and a large number of mineral sand mines, with associated processing facilities. Exposures resulting from these mining and processing operations usually involve intakes of mixtures of radionuclides. This work describes the development of a suite of first order, linear compartment models, based on the ICRP Publication 66 respiratory tract model, and an analytical solution to the decay equations, for assessing the consequences of such intakes. The computer programs based on these models directly compute excretion, organ retention and organ and whole-body doses for intakes of either single radionuclides or any mixture of radionuclides belonging to the same radioactive decay chain. The intake can be via inhalation, ingestion or injection, and can be acute, chronic or of limited duration. The starting concentration and degree of secular (dis)equilibrium can be specified for each radionuclide. No assumptions need to be made about the relative magnitudes of the radioactive half-lives of the different nuclides.  相似文献   

17.
18.
19.
可燃气体检测报警器测量结果的不确定度评定   总被引:1,自引:0,他引:1  
本文详细介绍了可燃气体检测报警器示值误差测量结果的不确定度评定方法。  相似文献   

20.
水三相点是开尔文热力学温度的唯一基准点,也是ITS-90国际温标重要的定义固定点。因此,水三相点不确定度分析对整个温标的建立、温度量值传递起着至关重要的作用。近3年来,中国计量科学研究院研制出一系列高质量的水三相点容器,加强了水三相点的研究,为不确定度的分析提供了更为可靠的实验依据。同时,不确定度的分析也是客观评价新研制容器性能的一个重要指标。因此,根据实验结果对新研制容器所复现的水三相点进行了不确定度评定。评定结果表明,其扩展不确定度为0.16mK(k=2.69,P=0.99)。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号