RZF预编码与MMSE-SIC检测联合的大规模MIMO系统预编码设计算法

研究了大规模多输入多输出(MIMO)系统的预编码设计算法。针对大规模MIMO系统通常利用增加用户天线数来提高系统频谱效率的方法会导致用户间干扰增大,从而对系统性能产生负面影响的问题,提出了一种将正则化迫零(RZF)预编码与最小均方误差-串行干扰消除(MMSE-SIC)检测相结合的改进算法。该算法通过在基站端采用RZF预编码对信号进行预处理以平衡用户间干扰和噪声干扰的影响,继而在接收端运用检测性能优异的MMSE-SIC算法来进一步减轻信号中的干扰,从而达到提升系统容量的目的。实验结果表明,这种将RZF预编码与MMSE-SIC检测相结合的改进算法,在用户间干扰较大时具有较好的适用性,且在完全已知和未完全已知信道状态信息情况下的频谱效率均优于传统RZF算法。     

采用Tomlinson-Harashima预编码的多天线多用户系统的低复杂度用户选择算法

针对采用Tomlinson-Harashima预编码(THP)的下行多天线多用户系统,提出了一种基于启发式Gram-Schmidt(G-S)正交化的低复杂度的贪婪用户选择算法.仿真结果表明,该算法的系统吞吐量性能非常接近最优遍历搜索的性能,优于迫零波束成型准正交用户选择(ZFBF-SUS)方案的性能,并且在容量域上具有渐进最优性.     

基于ZF-DPC机制的多天线下行系统的自适应调制

以系统总速率最大化为目标，基于迫零污纸编码（ZF-DPC）机制提出了MIMO多用户下行系统的一种保障用户QoS的自适应调制方案。根据这一方案，基站应用空分多址接入（SDMA）同时支持多个用户；针对污纸编码（DPC）的极高复杂度，利用次优的ZF-DPC消除用户间的干扰；在理想信道信息情形下实现可变速率可变功率自适应调制。考虑到最优算法的高复杂度，提出了两种可应用到实际系统的低复杂度次优算法。仿真结果表明，次优算法在极大降低系统复杂度的同时，总速率比较接近最优算法的性能。     

大规模MIMO系统的全导频RZF预编码方法

研究了大规模多输入多输出(MIMO)系统的预编码。针对小区间干扰和导频污染会对预编码的有效性产生较大影响的问题,提出了一种改进的全导频正则化迫零(RZF)预编码方法。该方法通过将有限的正交导频信号分配给小区用户来对预编码矩阵中的信道向量进行优化,得到优化后的全导频正则化预编码矩阵,并依此推导出新的包含导频污染函数和用户干扰函数的和速率表达式。另外,综合考虑基站天线数、用户数以及导频重用因子,优化其配置关系,从而用较少的用户信息和更高的导频重用因子来抑制更多的小区间干扰,有效地提升系统性能。实验结果表明,这种改进的RZF预编码算法能够较好地提高系统容量,在完全已知信道状态信息(CSI)和未完全已知CSI两种情况下的频谱效率及和速率均优于传统的RZF方法。     

前馈神经网络在空调负荷预测中的应用

空调系统负荷是一个典型的具有动态性、不确定性等随机特性的非线性模型，传统方式难以实现准确、快速地预测空调系统动态负荷。人工神经网络具有高度的非线性运算能力和很强的容错能力，其中最为广泛的是前馈神经网络和采用误差反向传播算法来计算网络权值。本文讨论当误差不为零或者不为线性函数，即二阶项s（w）不能忽略时的Hesse矩阵的近似计算，进而训练网络。研究结果表明，用该种神经网络预测空调负荷和计算的结果会较好地吻合。     

非理想信道估计条件下OFDM系统的最大似然检测算法

基于最大似然的准则,研究了理想信道估计条件下和非理想信道估条件下OFDM系统的最优检测算法。研究结果表明,当发送信号为PSK调制方式时,无论是理想信道估计还是非理想信道估计,最大似然检测算法与传统的迫零检测算法等价。但当信道估计非理想且发送信号的调制方式为16QAM或高阶QAM时,采用最大似然检测算法才能够获得更好的性能。     

基于MIMO的信号检测技术在宽带数据链中的应用

分析了多输入多输出系统中空分复用和空时分组码的解码算法，提出了一种空分复用和空时分组码相结合的方案，探讨了这种方案的解码算法并对该算法进行了仿真验证．结果表明，这种方案的BER性能在高信噪比时要好于其它方案，因而可以应用到需要高传输速率以及高链路可靠性的宽带数据链中．     

卧式金属罐容量检测方法研究

基于容量比较法、光电内测距法和自动测量控制原理,就卧式金属罐容量检测方法进行了研究.提出检测过程的模糊控制与数据处理优化算法,建立了具有自动容量比较法检测系统;提出检测过程的自动识别、拟合与数据处理优化算法,建立了自动几何测量法检测系统;分别与手动容量比较法检测生成的容量表进行比较,计算了检测系统所生成容量表的不确定度;实现了加油站在不停业、不清洗的前提下对地埋卧式金属罐容量的现场检测.     

多尺度法的设解形式之探讨

当采用多尺度法研究非线性振动问题时，经常会遇到不同情形下系统响应的设解形式不同的问题．文中针对一类具有平方和立方非线性项的单自由度和多自由度非线性系统，得到不同设解形式下的一次近似解和二次近似解，并与数值解相比较，发现2种设解形式的近似解与数值仿真解的解曲线吻合很好，表明传统的各种设解形式在研究弱非线性系统时都有很好的近似性．     

多阶段控制系统的优化及其在水平井设计中的应用

水平井三维轨道设计是以方位角、井斜角为状态变量，以曲线半径、装置角、曲线段长为控制变量，以入靶精度等为性能指标的非线性多阶段最优控制系统。针对该系统多峰的特点，本文提出一种改进的GA，该算法通过引进个体相似性来保持群体的多样性；通过定义的梯度算子生成新的个体来加速算法的收敛。将该算法用于辽河油田多口水平井的优化设计，数值结果表明了算法的正确性、有效性。     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.     

Study on Bond Ability of Arc-Spraying Coatings with Different Surface Pretreatment on Cast-Iron

Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting.     

Structural Characteristics of TiO2 Ceramic Coating by Micro-Plasma Oxidation

TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure.     

Evaluation of fatigue life of steel using steel grain size

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.