Array biosensor for simultaneous identification of bacterial, viral, and protein analytes.

The array biosensor was fabricated to analyze multiple samples simultaneously for multiple analytes. The sensor utilized a standard sandwich immunoassay format: Antigen-specific "capture" antibodies were immobilized in a patterned array on the surface of a planar waveguide and bound analyte was subsequently detected using fluorescent tracer antibodies. This study describes the analysis of 126 blind samples for the presence of three distinct classes of analytes. To address potential complications arising from using a mixture of tracer antibodies in the multianalyte assay, three single-analyte assays were run in parallel with a multianalyte assay. Mixtures of analytes were also assayed to demonstrate the sensor's ability to detect more than a single species at a time. The array sensor was capable of detecting viral, bacterial, and protein analytes using a facile 14-min assay with sensitivity levels approaching those of standard ELISA methods. Limits of detection for Bacillus globigii, MS2 bacteriophage, and staphylococcal enterotoxin B (SEB) were 10(5) cfu/mL, 10(7) pfu/mL, and 10 ng/mL, respectively. The array biosensor also analyzed multiple samples simultaneously and detected mixtures of the different types of analytes in the multianalyte format.     

Magnetite-containing spherical silica nanoparticles for biocatalysis and bioseparations

The simultaneous entrapment of biological macromolecules and nanostructured silica-coated magnetite in sol-gel materials using a reverse-micelle technique leads to a bioactive, mechanically stable, nanometer-sized, and magnetically separable particles. These spherical particles have a typical diameter of 53 +/- 4 nm, a large surface area of 330 m(2)/g, an average pore diameter of 1.5 nm, a total pore volume of 1.427 cm(3)/g and a saturated magnetization (M(S)) of 3.2 emu/g. Peroxidase entrapped in these particles shows Michaelis-Mentan kinetics and high activity. The catalytic reaction will take place immediately after adding these particles to the reaction solution. These enzyme entrapping particles catalysts can be easily separated from the reaction mixture by simply using an external magnetic field. Experiments have proved that these catalysts have a long-term stability toward temperature and pH change, as compared to free enzyme molecules. To further prove the application of this novel magnetic biomaterial in analytical chemistry, a magnetic-separation immunoassay system was also developed for the quantitative determination of gentamicin. The calibration for gentamicin has a working range of 200-4000 ng/mL, with a detection limit of 160 ng/mL, which is close to that of the fluorescent polarization immunoassay (FPIA) using the same reactants.     

Carbon nanotubes with enhanced chemiluminescence immunoassay for CCD-based detection of Staphylococcal enterotoxin B in food

Enhanced chemiluminescence (ECL) detection can significantly enhance the sensitivity of immunoassays but often requires expensive and complex detectors. The need for these detectors limits broader use of ECL in immunoassay applications. To make ECL more practical for immunoassays, we utilize a simple cooled charge-coupled device (CCD) detector combined with carbon nanotubes (CNTs) for primary antibody immobilization to develop a simple and portable point-of-care immunosensor. This combination of ECL, CNT, and CCD detector technologies is used to improve the detection of Staphylococcal enterotoxin B (SEB) in food. Anti-SEB primary antibodies were immobilized onto the CNT surface, and the antibody-nanotube mixture was immobilized onto a polycarbonate surface. SEB was then detected by an ELISA assay on the CNT-polycarbonate surface with an ECL assay. SEB in buffer, soy milk, apple juice, and meat baby food was assayed with a LOD of 0.01 ng/mL using our CCD detector, a level similar to the detection limit obtained with a fluorometric detector when using the CNTs. This level is far more sensitive than the conventional ELISA, which has a LOD of approximately 1 ng/mL. Our simple, versatile, and inexpensive point-of-care immunosensor combined with the CNT-ECL immunoassay method described in this work can also be used to simplify and increase sensitivity for many other types of diagnostics and detection assays.     

In situ amplified electrochemical immunoassay for carcinoembryonic antigen using horseradish peroxidase-encapsulated nanogold hollow microspheres as labels

Methods based on sandwich-type electrochemical enzyme immunoassay protocol have been extensively developed for the detection of biomolecules, but most often exhibit low detection signals and low detection sensitivity, and are unsuitable for routine use. In this study, we initially synthesized specially horseradish peroxidase-encapsulated nanogold hollow microspheres (HRP-GHS), and then the prepared HRP-GHS was conjugated to the secondary carcinoembryonic antibody (HRP-GHS- anti-CEA). Carcinoembryonic antigen (CEA), as a model protein, was monitored by using the electrochemical sandwich-type enzyme immunoassay format. Under optimized conditions, the linear range of the immunoassay by using single HRP-labeled anti-CEA (HRP- anti-CEA) as secondary antibodies is 2.5-120 ng/mL with a detection limit of 1.5 ng/mL CEA, while the assay sensitivity by using HRP-GHS- anti-CEA as secondary antibodies is further increased from 0.01 to 200 ng/mL with a lower detection limit of 1.5 pg/mL CEA. The intra- and interassay reproducibility is acceptable. The CEA concentrations of the clinical serum specimens assayed by the developed immunoassay show consistent results in comparison with those obtained by commercially available enzyme-linked immunosorbent assay. This immunoassay system has many desirable merits including sensitivity, accuracy, and little required instrumentation. Significantly, the new protocol may be quite promising, with potentially broad applications for clinical immunoassays.     

Toward single molecule detection of staphylococcal enterotoxin B: mobile sandwich immunoassay on gliding microtubules

An immunoassay based on gliding microtubules (MTs) is described for the detection of staphylococcal enterotoxin B. Detection is performed in a sandwich immunoassay format. Gliding microtubules carry the antigen-specific "capture" antibody, and bound analyte is detected using a fluorescent viral scaffold as the tracer. A detailed modification scheme for the MTs postpolymerization is described along with corresponding quantification by fluorescence spectroscopy. The resultant antibody-MTs maintain their morphology and gliding capabilities. We report a limit of detection down to 0.5 ng/mL during active transport in a 30 min assay time and down to 1 ng/mL on static surfaces. This study demonstrates the kinesin/MT-mediated capture, transport, and detection of the biowarfare agent SEB in a microfluidic format.     

Ultrasensitive electrochemical immunosensor for clinical immunoassay using thionine-doped magnetic gold nanospheres as labels and horseradish peroxidase as enhancer

A new signal amplification strategy based on thionine (TH)-doped magnetic gold nanospheres as labels and horseradish peroxidase (HRP) as enhancer holds promise to improve the sensitivity and detection limit of the immunoassay for carcinoembryonic antigen (CEA), as a model protein. This immunoassay system was fabricated on a carbon fiber microelectrode (CFME) covered with a well-ordered anti-CEA/protein A/nanogold architecture. The reverse micelle method was initially used for the preparation of TH-doped magnetic gold nanospheres (nanospheres), and the synthesized nanospheres were then labeled on HRP-bound anti-CEA as a secondary antibody (bionanospheres). Sandwich-type protocol was successfully introduced to develop a new high-efficiency electrochemical immunoassay with the labeled bionanospheres toward the reduction of H2O2. Under optimized conditions, the linear range of the proposed immunoassay without HRP as enhancer was 1.2-125 ng/mL CEA, whereas the assay sensitivity by using HRP as enhancer could be further increased to 0.01 ng/mL with the linear range from 0.01 to 160 ng/mL CEA. The developed immunoassay method showed good precision, high sensitivity, acceptable stability and reproducibility, and could be used for the detection of real samples with consistent results in comparison with those obtained by the enzyme-linked immunosorbent assay (ELISA) method.     

Development of xMAP Assay for Detection of Six Protein Toxins

xMAP technology was used for simultaneous identification of six protein toxins (staphylococcal enterotoxins A and B, cholera toxin, ricin, botulinum toxin A, and heat labile toxin of E. coli). Monoclonal antibody-conjugated xMAP microspheres and biotinilated monoclonal antibodies were used to detect the toxins in a sandwich immunoassay format. The detection limits were found to be 0.01 ng/mL for staphylococcal enterotoxin A, cholera toxin, botulinum toxin A, and ricin in model buffer (PBS-BSA) and 0.1 ng/mL for staphylococcal enterotoxin B and LT. In a complex matrix, such as cow milk, the limits of detection for staphylococcal enterotoxins A and B, cholera toxin, botulinum toxin A, and ricin increased 2- to 5-fold, while for LT the detection limit increased 30-fold in comparison with the same analysis in PBS-BSA. In the both PBS-BSA and milk samples, the xMAP test system was 3-200 times (depending on the toxin) more sensitive than ELISA systems with the same pairs of monoclonal antibodies used. The time required for a simultaneous analysis of six toxins using the xMAP system did not exceed the time required for ELISA to analyze one toxin. In the future, the assay may be used in clinical diagnostics and for food and environmental monitoring.     

Flow-through multianalyte chemiluminescent immunosensing system with designed substrate zone-resolved technique for sequential detection of tumor markers

A novel flow-through immunosensing system for performing a multianalyte chemiluminescent determination in a single run was designed. A new analytical strategy of substrate zone-resolved technique was proposed. Using carcinoma antigen 125 (CA 125) and carcinoembryonic antigen (CEA) as model analytes, the capture antibodies for CA 125 and CEA were immobilized on an UltraBind aldehyde-activated membrane to act as an immunoreactor, to which the mixture of CA 125, CEA, and their corresponding tracers, horseradish peroxidase (HRP)-labeled anti-CA 125 and alkaline phosphatase (ALP)-labeled anti-CEA, was introduced for on-line incubation. The substrates for HRP and ALP were then delivered into the detection cell sequentially to perform substrate zone-resolved immunoassay by a sandwich format. Under optimal conditions, CA 125 and CEA could be assayed in the ranges of 5.0-100 units/mL and 1.0-120 ng/mL, respectively. The whole assay process including incubation, wash, detection, and regeneration could be completed in 35 min. The serum samples from the clinic were assayed with the proposed method, and the results were in acceptable agreement with the reference values. This method and the strategy of substrate zone-resolved technique could be further developed for high-throughput multianalyte immunoassay.     

Electrophoresis-assisted active immunoassay

An active assay can be defined as that in which diffusion-controlled reactions are replaced by active delivery of analytes to probe molecules. The present paper describes an electrophoresis-assisted version of an active ELISA performed in tubes or wells with a dialysis membrane attached to their bottoms. The permeability of such a membrane to small ions allows us to apply electric field perpendicular to the membrane surface and to rapidly transport and concentrate charged macromolecular analytes in its vicinity. Probe molecules were either adsorbed or covalently linked to a modified surface of a membrane from regenerated cellulose. An active assay was performed both in separate cells and in 96-well microplates. It was demonstrated that the active assay format allows one (i) to reduce assay time to minutes instead of hours, (ii) to increase sensitivity by a factor of 10-300, and (iii) to capture within 10 min up to 70% of all the analyte molecules present in 0.36 mL of solution.     

Immobilization of proteins in immunochemical microarrays fabricated by electrospray deposition.

Electrospray (ES) deposition has been applied to fabricate protein microarrays for immunochemical assay. Protein antigens were deposited as arrays of dry spots on a surface of aluminized plastic. Deposition was performed from water solutions containing a 10-fold (w/w of dry protein) excess of sucrose. Upon contact with humid air, the spots turn into microdroplets of sucrose/protein solution from which proteins were either adsorbed or covalently linked to clean or modified aluminum surfaces. It was found that covalent binding of antigens via aldehyde groups of oxidized branched dextran followed by reduction of the Schiff bonds gives the highest sensitivity and the lowest background in microarray-based ELISA, as compared to other tested methods of antigen immobilization. The minimum concentration of a primary mouse antibody detected in indirect ELISA with such antigen microarrays was approximately 0.3-1.0 ng/mL for ELF-97 or BCIP/NBT substrates of alkaline phosphatase.     

Versatile immunosensor using CdTe quantum dots as electrochemical and fluorescent labels

A versatile immunosensor using CdTe quantum dots as electrochemical and fluorescent labels has been developed for sensitive protein detection. This sandwich-type sensor is fabricated on an indium tin oxide chip covered with a well-ordered gold nanoparticle monolayer. Gel imaging systems were successfully introduced to develop a novel high-efficient optical immunoassay, which could perform simultaneous detection for the samples with a series of different concentrations of a target analyte. The linear range of this assay was between 0.1 and 500 ng/mL, and the assay sensitivity could be further increased to 0.005 ng/mL with the linear range from 0.005 to 100 ng/mL by stripping voltammetric analysis. The immunosensor showed good precision, high sensitivity, acceptable stability, and reproducibility and could be used for the detection of real sample with consistent results in comparison with those obtained by the ELISA method.     

Rotating electrode potentiometry: lowering the detection limits of nonequilibrium polyion-sensitive membrane electrodes

A rotating electrode configuration is evaluated as a means to lower the detection limits of newly devised polyion-sensitive membrane electrodes (PSEs). Planar potentiometric polycation and polyanion PSEs are prepared by incorporating tridodecylmethylammonium chloride and calcium dinonylnaphthalenesulfonate, respectively, into plasticized PVC or polyurethane membranes and mounting disks of such films on an electrode body housed in a conventional rotating disk electrode apparatus. Rotation of the PSEs at 5000 rpm results in an enhancement in the detection limits toward heparin (polyanion) and protamine (polycation) of at least 1 order of magnitude (to 0.01 unit/mL for heparin; 0.02 microg/mL for protamine) over that observed when the EMF responses of the same electrodes are assessed using a stir-bar to achieve convective mass transport. A linear relationship between omega(-1/2), where omega is the rotating angular frequency, and C1/2, the polyion concentration corresponding to half the total maximum deltaEMF response toward the polyion species, is observed. It is further shown that the rotating polycation sensor can be used as an end-point detector to greatly enhance (relative to nonrotated indicator electrode) the analytical resolution and precision for measurement of low concentrations of heparin when such samples are titrated with protamine. The theoretical basis for lowering the detection limits by rotating PSEs is discussed based on the unique nonequilibrium response mechanism of such sensors.     

Fluorescein isothiocyanate linked immunoabsorbent assay based on surface-enhanced resonance Raman scattering

By using fluorescein isothiocyanate (FITC) as a Raman probe, we have developed a simple and sensitive method for an immunoassay based on surface-enhanced resonance Raman scattering (SERRS). For the first time, a SERRS-based immunoassay on the bottom of a microtiter plate is reported. We have applied the main pretreatment method of enzyme-linked immunoabsorbent assay (ELISA) to the present study. In this method, SERRS spectra of FITC are measured after several continuous steps of antigen coating, blocking, antibody adding, and colloidal silver staining. Human immunoglobulin G (IgG) and FITC-antihuman IgG are used for the immunoreaction. The proposed method has several advantages for immunoassay. First, we can determine the concentration of antigens via the intensity of a SERRS signal of FITC molecules that are attached to antibodies without an enzyme reaction, and thus the process is simple and reagent saving. Second, one can obtain SERRS spectra of FITC directly from silver aggregates on the bottom of a microtiter plate without displacement. Third, by using SERRS of FITC, the present method is sensitive enough to detect antigens at the concentration of 0.2 ng/mL, which is comparable to ELISA. Results are presented to demonstrate that the proposed SERRS-based immunoassay may have great potential as a high-sensitivity and high-throughout immunoassay.     

Encoded silica colloidal crystal beads as supports for potential multiplex immunoassay

We developed a new kind of suspension array for multiplexed immunoassays using silica colloidal crystal beads (SCCBs) as coding carriers. The monodisperse and size-controlled SCCBs were fabricated by a microfluidic device. Calcination was employed to improve the mechanical stability and lower the fluorescent background of the SCCBs. Immobilization of protein molecules on the surface of the SCCBs through chemical bonds was studied, and the modification condition was optimized to increase the detection sensitivity. Results indicated that the SCCBs as supports were more sensitive (0.92 ng/mL IgG) than the glass beads (27 ng/mL IgG) and the planar carriers (140 ng/mL IgG). A multiplex immunoassay showed the flexibility and feasibility of SCCBs array in clinical applications.     

Direct construction of an open-sandwich enzyme immunoassay for one-step noncompetitive detection of thyroid hormone T4

To establish a sensitive noncompetitive immunoassay for thyroxine (T4), we attempted to isolate anti-T4 antibodies from a phage display library based on a phagemid pDong1 ( Dong et al. Anal. Biochem.2009, 36, 386 ), which was designed to enable open-sandwich enzyme-linked immunosorbent assay (OS-ELISA) after selection on immobilized antigen. After the Fab-displaying phage library made from the splenocytes of T4-KLH immunized mice was subjected to biopanning on T4-BSA, two T4-specific clones were obtained. When they were assayed by indirect competitive ELISA, both clones showed low IC(50) (5-13 ng/mL), indicating their high affinity to T4. When they were used for OS-ELISA that detects antigen-dependency of the interaction between variable domains V(H) and V(L), a clone successfully detected 1 ng/mL of T4 with a working range superior to that of competitive IA. OS-ELISA was also performed with maltose binding protein (MBP)-fused V(H)/V(L) of this clone, which showed a detection limit less than 0.1 ng/mL T4. Moreover, the assay showed cross-reactivity with T3 similar to that of competitive ELISA, and also gave a reasonable total serum T4 concentration (90 ng/mL) from ethanol-extracted sample serum using the recombinant proteins. This is the first direct construction of an OS-ELISA system bypassing hybridoma, which will be applicable to the detection of many other small molecule antigens.     

Channel and substrate zone two-dimensional resolution for chemiluminescent multiplex immunoassay

A two-dimensional resolution system of channels and substrate zones was proposed for multiplex immunoassay performed with a designed multichannel chemiluminescent (CL) detection device coupled with a single photomultiplier. Using carcinoma antigen 125 (CA 125), carcinoma antigen 153 (CA 153), carcinoma antigen 199 (CA 199), and carcinoembryonic antigen (CEA) as two couples of model analytes, two couples of capture antibodies were immobilized in two channels, respectively. With a sandwich format, the CL substrates for alkaline phosphatase and horseradish peroxidase were delivered into the channels sequentially to perform a multiplex immunoassay after the sample and tracer antibodies were introduced into the channels for on-line incubation. CA 125, CA 153, CA 199, and CEA could be assayed in the ranges of 0.50-80, 2.0-100, and 5.0-150 U/mL and 1.0-70 ng/mL with limits of detection of 0.15, 0.80, and 2.0 U/mL and 0.65 ng/mL at 3sigma, respectively. The whole assay process including regeneration of the device could be completed in 37 min. The proposed system showed acceptable detection and fabrication reproducibility, and the results obtained were in acceptable agreement with those from parallel single-analyte test of practical clinical sera. This technique provides a new strategy for a simple, automated, and near-simultaneous multianalyte immunoassay.     

利用微型生物光学传感器的竞争免疫检测法检测牛奶中氨苄青霉素

利用微型表面等离子体共振的生物传感器测量了残留在牛奶中的氨苄青霉素的浓度.采用竞争抑制试验的方法,即先将定量的单克隆抗氨苄青霉素抗体（3H295）和含氨苄青霉素的牛奶样品混合,样品中氨苄青霉素即与抗体结合,然后将该混合样品通入传感器表面,传感器的表面共价固定了氨苄青霉素分子,通过生物特异相互作用分析,检测样品中剩余的抗体,从而得到氨苄青霉素的浓度.样品的测量时间为10min,最低检测限为2.5 ng/mL,低于欧盟标准4 ng/mL.该检测方法的测量时间短、重复性好,批间测量的变异系数为5.4%,表明该方法能满足实际测量要求.     

Expanding the structural diversity of polyelectrolyte complexes and polyzwitterions

Charged (macro)molecules are essential components in natural materials and organisms; thus the rational design of biomimetic materials requires a holistic understanding of structure–property relationships in charged systems. We discuss recent progress in uncovering such relationships for polyzwitterions and polyelectrolyte complexes, with emphases on the synthetic strategies that were employed in systematic studies. For polyelectrolytes, discussion is confined to the effects that structural variations in polycation and polyanion structure have on the fundamental phase behavior of the corresponding polyelectrolyte complexes. In the field of polyzwitterions, both fundamental and applied properties are discussed in relation to chemical structure. Finally, we present an overview of promising chemistries that will expand the structural landscape of charged macromolecules with the aim of stimulating new research to further uncover and understand the fundamental design principles for these materials.     

Highly sensitive immunoassay based on immunogold-silver amplification and inductively coupled plasma mass spectrometric detection

In this work, we demonstrated a highly sensitive inductively coupled plasma mass spectrometric (ICPMS) method for the determination of human carcinoembryonic antigen (CEA), which combined the inherent high sensitivity of elemental mass spectrometric measurement with the signal amplification of catalytic silver deposition on immunogold tags. The silver amplification procedure was easy to handle and required cheap reagents, and the sensitivity was greatly enhanced to 60-fold after a 15 min silver amplification procedure. The experimental conditions, including detection of gold and silver by ICPMS, immunoassay parameters, silver amplification parameters, analytical performance, and clinical serum samples analysis, were investigated. The ICPMS Ag signal intensity depends linearly on the logarithm of the concentration of human CEA over the range of 0.07-1000 ng mL(-1) with a limit of detection (LOD, 3σ) of 0.03 ng mL(-1) (i.e., 0.15 pM). The LOD of the proposed method is around 2 orders of magnitude lower than that by the widely used enzyme-linked immunosorbent assay (ELISA) and 1 order of magnitude lower than that by clinical routine chemiluminescence immunoassay (CLIA) or time-resolved fluoroimmunoassay (TRFIA) and conventional ICPMS immunoassay. The present strategy was applied to the determination of human CEA in clinical human serum samples, and the results were in good agreement with those obtained by chemiluminescence immunoassay.     

Isolation of alpaca anti-hapten heavy chain single domain antibodies for development of sensitive immunoassay

Some unique subclasses of Camelidae antibodies are devoid of the light chain, and the antigen binding site is comprised exclusively of the variable domain of the heavy chain (VHH). Although conventional antibodies dominate current assay development, recombinant VHHs have a high potential as alternative reagents for the next generation of immunoassay. We expressed VHHs from an immunized alpaca and developed a VHH-based immunoassay using 3-phenoxybenzoic acid (3-PBA), a major metabolite of pyrethroid insecticides as a model system. A phage VHH library was constructed, and seven VHH clones were selected by competitive binding with 3-PBA. The best immunoassay developed with one of these VHHs showed an IC(50) of 1.4 ng/mL (limit of detection (LOD) = 0.1 ng/mL). These parameters were further improved by using the phage borne VHH, IC(50) = 0.1 ng/mL and LOD = 0.01 ng/mL. Both assays showed a similar tolerance to methanol and dimethylsulfoxide up to 50% in assay buffer. The assay was highly specific to 3-PBA and its 4-hydroxylated derivative, 4-hydroxy 3-PBA, (150% cross reactivity) with negligible cross reactivity with other tested structural analogues, and the recovery from spiked urine sample ranged from 80 to 112%. In conclusion, a highly specific and sensitive VHH for 3-PBA was developed using sequences from immunized alpaca and phage display technology for antibody selection.