Nanowires enabling signal-enhanced nanoscale Raman spectroscopy

Silicon nanowires grown by the vapor-liquid-solid (VLS) mechanism catalyzed by gold show gold caps (droplets) approximately 20-500 nm in diameter with a half spherical towards almost spherical shape. These gold droplets are well suited to exploit the surface-enhanced Raman scattering (SERS) effect and could be used for tip-enhanced Raman spectroscopy (TERS). The gold droplet of a nanowire attached to an atomic force microscopy (AFM) tip could locally enhance the Raman signal and increase the spatial resolution. Used as a SERS template, an ensemble of self-organizing nanowires grown bottom up on a silicon substrate could allow highly sensitive signal-enhanced Raman spectroscopy of materials that show a characteristic Raman signature. A combination of a nanowire-based TERS probe and a nanowire-based SERS substrate promises optimized signal enhancement so that the detection of highly dilute species, even single molecules or single bacteria or DNA strands, and other soft matter is within reach. Potential applications of this novel nanowire-based SERS and TERS solution lie in the fields of biomedical and life sciences, as well as security and solid-state research such as silicon technology.     

用于表面增强拉曼散射的石墨烯/纳米粒子复合基底材料的研究现状

表面增强拉曼散射(Surface enhanced Raman scattering,SERS)自从被发现以来在单分子检测、生物医学体系、环境科学、纳米材料以及传感器等领域获得了广泛的应用,而其SERS增强因子、物质吸附能力等性能的好坏主要取决于SERS的基底材料及结构。相比于纳米粒子的SERS基底,石墨烯/纳米粒子复合材料的SERS基底由于石墨烯额外的化学增强作用、表面分子富集和荧光淬灭等功能而受到各国研究人员的重视。首先分析了石墨烯/纳米粒子复合材料的SERS增强机理,然后从材料制备和基底结构两个方面综述了石墨烯/纳米粒子复合材料在SERS上的研究现状,最后对其未来的发展方向进行了展望。     

Controlled Electrodeposition of Gold on Graphene: Maximization of the Defect‐Enhanced Raman Scattering Response

A reliable method to prepare a surface‐enhanced Raman scattering (SERS) active substrate is developed herein, by electrodeposition of gold nanoparticles (Au NPs) on defect‐engineered, large area chemical vapour deposition graphene (GR). A plasma treatment strategy is used in order to engineer the structural defects on the basal plane of large area single‐layer graphene. This defect‐engineered Au functionalized GR, offers reproducible SERS signals over the large area GR surface. The Raman data, along with X‐ray photoelectron spectroscopy and analysis of the water contact angle are used to rationalize the functionalization of the graphene layer. It is found that Au NPs functionalization of the “defect‐engineered” graphene substrates permits detection of concentrations as low as 10^?16 m for the probe molecule Rhodamine B, which offers an outstanding molecular sensing ability. Interestingly, a Raman signal enhancement of up to ≈10⁸ is achieved. Moreover, it is observed that GR effectively quenches the fluorescence background from the Au NPs and molecules due to the strong resonance energy transfer between Au NPs and GR. The results presented offer significant direction for the design and fabrication of ultra‐sensitive SERS platforms, and also open up possibilities for novel applications of defect engineered graphene in biosensors, catalysis, and optoelectronic devices.     

Surface-enhanced Raman scattering of dopamine on self-assembled gold nanoparticles

Dopamine, a potent neurotransmitter in the brain, influences a variety of motivated behaviors and plays a major role in Parkinson's disease. In this study, the Raman signal of dopamine was detected on a fabricated nanoparticle-immobilized glass surface by surface-enhanced raman spectroscopy (SERS). Amine-modified glass was prepared by the self-assembly of amine-terminated silane on substrate, followed by the deposition of gold nanoparticles. The gold nanoparticles deposited on the glass surface were functionalized by anti-dopamine or dopamine. The antigen-dopamine was captured by antibody-assembled gold substrate and detected by SERS. The optical properties and morpology of the glass substrate with immobilized gold nanoparticles were analyzed by scanning electron microscopy and UV-VIS absorption spectroscopy. The Raman spectrum of dopamine displayed broad bands at 1267, 1331, 1158, 1478, 1578 and 1584 cm(-1). The strongest peaks in the spectra (at 1267 and 1478 cm(-1)) were identified as phenolic carbon-oxygen and phenyl C=C stretches, respectively. A working curve of the SERS signal constructed from cathecol ring vibration versus antigen-dopamine concentration was obtained at 1478 cm(-1), and the non-optimized detection limit for anti-dopamine surface antigen was as low as 1 ng/ml. These results suggest that SERS-based immunosensor can be a promising tool for the detection and screening of neurotransmitters.     

Nano‐biosensor based on reduced graphene oxide and gold nanoparticles,for detection of phenylketonuria‐associated DNA mutation

Phenylketonuria (PKU)‐associated DNA mutation in newborn children can be harmful to his health and early detection is the best way to inhibit consequences. A novel electrochemical nano‐biosensor was developed for PKU detection, based on signal amplification using nanomaterials, e.g. gold nanoparticles (AuNPs) decorated on the reduced graphene oxide sheet on the screen‐printed carbon electrode. The fabrication steps were checked by field emission scanning electron microscope imaging as well as cyclic voltammetry analysis. The specific alkanethiol single‐stranded DNA probes were attached by self‐assembly methodology on the AuNPs surface and Oracet blue was used as an intercalating electrochemical label. The results showed the detection limit of 21.3 fM and the dynamic range of 80–1200 fM. Moreover, the selectivity results represented a great specificity of the nano‐biosensor for its specific target DNA oligo versus other non‐specific sequences. The real sample simulation was performed successfully with almost no difference than a synthetic buffer solution environment.Inspec keywords: biosensors, nanosensors, nanoparticles, graphene compounds, gold, nanomedicine, DNA, molecular biophysics, biomedical equipment, electrochemical sensors, electrochemical electrodes, field emission scanning electron microscopy, voltammetry (chemical analysis), self‐assembly, biochemistryOther keywords: reduced graphene oxide, gold nanoparticles, phenylketonuria‐associated DNA mutation, newborn children, electrochemical nanobiosensor, signal amplification, nanomaterials, reduced graphene oxide sheet, screen‐printed carbon electrode, field emission scanning electron microscopy imaging, cyclic voltammetry, alkanethiol single‐stranded DNA probes, self‐assembly methodology, Oracet blue, intercalating electrochemical label, Au‐CO     

Surface-enhanced Raman scattering based nonfluorescent probe for multiplex DNA detection

To provide rapid and accurate detection of DNA markers in a straightforward, inexpensive, and multiplex format, an alternative surface-enhanced Raman scattering based probe was designed and fabricated to covalently attach both DNA probing sequence and nonfluorescent Raman tags to the surface of gold nanoparticles (DNA-AuP-RTag). The intensity of Raman signal of the probes could be controlled through the surface coverage of the nonfluorescent Raman tags (RTags). Detection sensitivity of these probes could be optimized by fine-tuning the amount of DNA molecules and RTags on the probes. Long-term stability of the DNA-AuP-RTag probes was found to be good (over 3 months). Excellent multiplexing capability of the DNA-AuP-RTag scheme was demonstrated by simultaneous identification of up to eight probes in a mixture. Detection of hybridization of single-stranded DNA to its complementary targets was successfully accomplished with a long-term goal to use nonfluorescent RTags in a Raman-based DNA microarray platform.     

Surface-enhanced Raman spectroscopy of self-assembled monolayers: sandwich architecture and nanoparticle shape dependence

Surface enhanced Raman scattering (SERS) spectra of 4-mercaptobenzoic acid (4-MBA) self-assembled monolayers (SAMs) on gold substrates is presented for SAMs onto which gold nanoparticles of various shapes have been electrostatically immobilized. SERS spectra of 4-MBA SAMs are enhanced in the presence of immobilized gold nanocrystals by a factor of 10(7)-10(9) relative to 4-MBA in solution. Large enhancement factors are a likely result of plasmon coupling between the nanoparticles (localized surface plasmon) and the smooth gold substrate (surface plasmon polariton), creating large localized electromagnetic fields at their interface, where 4-MBA molecules reside in this sandwich architecture. Moreover, enhancement factors depend on nanoparticle shape and vary by a factor of 10(2). This SERS geometry offers large surface enhancements for molecules adsorbed onto planar substrates and could be quite useful for determining chemical information for poor Raman scatterers from assays on 2-D substrates.     

Gold nanoparticles–graphene hybrids as active catalysts for Suzuki reaction

Graphene was successfully modified with gold nanoparticles in a facile route by reducing chloroauric acid in the presence of sodium dodecyl sulfate, which is used as both a surfactant and reducing agent. The gold nanoparticles–graphene hybrids were characterized by high-resolution transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction and energy X-ray spectroscopy. We demonstrate for the first time that the gold nanoparticles–graphene hybrids can act as efficient catalysts for the Suzuki reaction in water under aerobic conditions. The catalytic activity of gold nanoparticles–graphene hybrids was influenced by the size of the gold nanoparticles.     

Graphene/Gold nanoparticle composite-based paper sensor for electrochemical detection of hydrogen peroxide

In this article, we report the convenient preparation of graphene/gold nanoparticle-decorating filter membrane, which could be directly used as electrode for H₂O₂ sensing. The graphene oxide and chloroauric acid are reduced by l-ascorbic acid before covering the paper substrate. The reduced graphene oxide/gold nanoparticle-paper material is characterized by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The paper composite could be cut into piece and directly used as electrochemical sensor. The electrochemical experimental results show that the paper sensor has satisfying performances in sensing H₂O₂ with the detection limit of 15?μM and the linear range is 8.53–17.35?mM. This work would propose a novel strategy for the applications of graphene in the fields of electroanalysis and sensing.     

Detection of alkaline phosphatase using surface-enhanced Raman spectroscopy

A new approach was developed to detect the activity of alkaline phosphatase (ALP) enzyme at ultralow concentrations using a surface-enhanced Raman scattering (SERS) technique. The approach is based on the use of gold nanoparticles as a SERS material whereas 5-bromo-4-chloro-3-indolyl phosphate (BCIP) is used as a substrate of ALP. The enzymatic hydrolysis of BCIP led to the formation of indigo dye derivatives, which were found to be highly SERS active. For the first time, we were able to detect ALP at a concentration of approximately 4 x 10(-15) M or at single-molecule levels when ALP was incubated with BCIP for 1 h in the Tris-HCl buffer. The same technique also was successfully employed to detect surface-immobilized avidin, and a detection limit of 10 ng/mL was achieved. This new technique allows the detection of both free and labeled ALP as a Raman probe in enzyme immunoassays, immunoblotting, and DNA hybridization assays at ultralow concentrations.     

Characterization of different sequences of DNA on si substrate by atomic force microscopy and gold nanoparticle labeling

In this paper, different sequences of single-strand DNA modified on Si substrate were studied taking advantages of the high resolution of atomic force microscopy (AFM) and signal enhancement of gold nanoparticles. Two sequences of single-strand DNA, as a model, were immobilized on Si substrate and hybridized with their sequence-complementary DNA molecules modified respectively with two sizes of gold nanoparticles. The surface of Si substrate was characterized through detecting the size and coverage of gold nanoparticles by AFM. Results demonstrated that different sizes of gold nanoparticles represented different sequences of DNA immobilized on the substrate. Density and distribution of DNA on Si substrate can be investigated by AFM imaging using gold nanoparticles as topographic markers. Compared to other sensitive methods such as fluorescence energy transfer, X-ray photoelectron, and radiolabeling experiments, this approach is advantageous in terms of high spatial resolution in sub-micrometer scale. This new method will be beneficial in the characterization of DNA immobilized on chip surfaces.     

Ultrabroadband photodetection based on graphene ink

We report photodetection in a very large spectral bandwidth, which encompasses ultraviolet, visible and near infrared, using graphene inks or graphene inks functionalized with either gold or silver nanoparticles, or gold nanoparticles further encapsulated with bovine serum albumin deposited on interdigitated electrodes fabricated on a silicon dioxide/silicon substrate. In contrast to gold-functionalized graphene inks, which have responsivities better than 1 mA W(-1) at a 0.1 V bias over the huge bandwidth extending from 215 to 2500 nm, Ag-functionalized inks show at least a four-fold increased responsivity, with a record value of 13.7 mA W(-1) in near infrared.     

Stable, dispersible surface-enhanced Raman scattering substrate capable of detecting molecules bound to silica-immobilized ligands

A stable surface-enhanced Raman scattering (SERS) substrate is developed through immobilization of gold sols onto aminated silica beads. The plasmon resonance is established by spacing of gold sols on the bead surface and remains stable over extended periods of time due to the large number of amine groups that provide stable anchoring of gold to the surface. Unlike planar supports, this substrate can be dispersed in a sample, providing high surface area for detection and efficient transport of analytes to its surface. This substrate can be used to detect the binding of a molecule to ligands on the silica surface, which avoids the stability limitations of thiol-bound ligands on gold. Chemical modification of the amine groups on the silica surface with benzoic anhydride could be readily detected in Raman scattering enhanced by the neighboring gold sols, with nearly the same sensitivity as benzylthiol bound directly to the gold surfaces. This result suggests future work involving the immobilization of other ligands through the residual amine groups to the silica, which could be used to selectively attract target analytes to the SERS-active surface.     

Detection of adenosine triphosphate with an aptamer biosensor based on surface-enhanced Raman scattering

A simple, ultrasensitive, highly selective, and reagent-free aptamer-based biosensor has been developed for quantitative detection of adenosine triphosphate (ATP) using surface-enhanced Raman scattering (SERS). The sensor contains a SERS probe made of gold nanostar@Raman label@SiO(2) core-shell nanoparticles in which the Raman label (malachite green isothiocyanate, MGITC) molecules are sandwiched between a gold nanostar core and a thin silica shell. Such a SERS probe brings enhanced signal and low background fluorescence, shows good water-solubility and stability, and exhibits no sign of photobleaching. The aptamer labeled with the SERS probe is designed to hybridize with the cDNA on a gold film to form a rigid duplex DNA. In the presence of ATP, the interaction between ATP and the aptamer results in the dissociation of the duplex DNA structure and thereby removal of the SERS probe from the gold film, reducing the Raman signal. The response of the SERS biosensor varies linearly with the logarithmic ATP concentration up to 2.0 nM with a limit of detection of 12.4 pM. Our work has provided an effective method for detection of small molecules with SERS.     

Surface-enhanced Raman scattering immunoassays using a rotated capture substrate

A rapid, sensitive format for immunosorbent assays has been developed to meet the increasing levels of performance (i.e., reduction of incubation times and detection limits) demanded in the medical, veterinary, and bioterrorism prevention arenas. This paper introduces the concept of a rotating capture substrate as a facile means to increase the flux of antigen and label to the solid-phase surface and thereby reduce assay time. To this end, a sandwich-type assay is carried out that couples the specificity of antibody-antigen interactions with the high sensitivity of surface-enhanced Raman scattering detection. To investigate this strategy, polyclonal anti-rabbit IgG was immobilized on a gold capture substrate via a thiolate coupling agent. The capture substrate, capable of controlled rotation, was then immersed in a sample solution containing rabbit IgG, which served as a model analyte. After binding the target IgG, the substrates were immersed and rotated in an extrinsic Raman label (ERL) labeling solution, which is composed of gold nanoparticles (60 nm) coated with an aromatic moiety as the Raman scatterer and an antibody as the biospecific recognition element. The effect of substrate rotation on both the antigen binding and ERL labeling steps was investigated. Implementation of optimized rotation conditions resulted in the reduction of assay times from 24 h to 25 min and a 10-fold improvement in the limit of detection. Finally, the developed protocol was applied to the detection of rabbit IgG suspended in goat serum, which served to assess performance in a biological matrix.     

DNAzyme-based colorimetric sensing of lead (Pb(2+)) using unmodified gold nanoparticle probes

Novel functional oligonucleotides, especially DNAzymes with RNA-cleavage activity, have been intensively studied due to their potential applications in therapeutics and sensors. Taking advantage of the high specificity of 17E DNAzyme for Pb(2+), highly sensitive and selective fluorescent, electrochemical and colorimetric sensors have been developed for Pb(2+). In this work, we report a simple, sensitive and label-free 17E DNAzyme-based sensor for Pb(2+) detection using unmodified gold nanoparticles (GNPs) based on the fact that unfolded single-stranded DNA could be adsorbed on the citrate protected GNPs while double-stranded DNA could not. By our method the substrate cleavage by the 17E DNAzyme in the presence of Pb(2+) could be monitored by color change of GNPs, thereby Pb(2+) detection was realized. The detection of Pb(2+) could be realized within 20?min, with a detection limit of 500?nM. The selectivity of our sensor has been investigated by challenging the sensing system with other divalent metal ions. Since common steps such as modification and separation could be successfully avoided, the sensor developed here could provide a simple, cost-effective yet rapid and sensitive measurement tool for Pb(2+) detection and may prove useful in the development of sensors for clinical toxicology and environmental monitoring in the future.     

Cetyltrimethylammonium bromide-modified spherical and cube-like gold nanoparticles as extrinsic Raman labels in surface-enhanced Raman spectroscopy based heterogeneous immunoassays

This paper reports on the characterization and preliminary comparison of gold nanoparticles of differing surface modification and shape when used as extrinsic Raman labels (ERLs) in high-sensitivity heterogeneous immunoassays based on surface enhanced Raman scattering (SERS). ERLs are gold nanoparticles coated with an adlayer of an intrinsically strong Raman scatterer, followed by a coating of a molecular recognition element (e.g., antibody). Three types of ERLs, all with a nominal size of approximately 30 nm, were fabricated by using spherical citrate-capped gold nanoparticles (sp-cit-Au NPs), spherical CTAB-capped gold nanoparticles (sp-CTAB-Au NPs), or cube-like CTAB-capped gold nanoparticles (cu-CTAB-Au NPs) as cores. The performance of these particles was assessed via a sandwich immunoassay for human IgG in phosphate buffered saline. The ERLs fabricated with sp-CTAB-Au NPs as cores proved to be more than 50 times more sensitive than those with sp-cit-Au NPs as cores; the same comparison showed that the ERLs with cu-CTAB-Au NPs as cores were close to 200 times more sensitive. Coupled with small differences in levels of nonspecific adsorption, these sensitivities translated to a limit of detection (LOD) of 94, 2.3, and 0.28 ng/mL, respectively, for the detection of human IgG in the case of sp-cit-Au NPs, sp-CTAB-Au NPs, and cu-CTAB-Au NPs. The LOD of the cu-CTAB-Au NPs is therefore approximately 340 times below that for the sp-cit-Au NPs. Potential applications of these labels to bioassays are briefly discussed.     

Hybrid Structures for Surface‐Enhanced Raman Scattering: DNA Origami/Gold Nanoparticle Dimer/Graphene

A combination of three innovative materials within one hybrid structure to explore the synergistic interaction of their individual properties is presented. The unique electronic, mechanical, and thermal properties of graphene are combined with the plasmonic properties of gold nanoparticle (AuNP) dimers, which are assembled using DNA origami nanostructures. This novel hybrid structure is characterized by means of correlated atomic force microscopy and surface‐enhanced Raman scattering (SERS). It is demonstrated that strong interactions between graphene and AuNPs result in superior SERS performance of the hybrid structure compared to their individual components. This is particularly evident in efficient fluorescence quenching, reduced background, and a decrease of the photobleaching rate up to one order of magnitude. The versatility of DNA origami structures to serve as interface for complex and precise arrangements of nanoparticles and other functional entities provides the basis to further exploit the potential of the here presented DNA origami–AuNP dimer–graphene hybrid structures.     

High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.