共查询到14条相似文献,搜索用时 109 毫秒
1.
介绍了无线射频标签(RFID)及其制作方法、工作原理和应用领域,阐明了RFID天线与导电油墨之间的关系,重点对导电油墨的组成、分类、不同体系油墨的特点进行了阐述,并对无机系、有机系和复合型三大类导电油墨的国内外研究现状做了详细的阐述和对比分析,指出了这三类油墨的特点和发展趋势,其中复合型导电油墨以其独特的优势,在导电油墨未来的研究和应用领域中,将替代传统的有机、无机系导电油墨,成为导电油墨的主导及RFID天线制作材料的首选. 相似文献
2.
RFID丝印墨层厚度影响因素的研究 总被引:4,自引:4,他引:0
介绍了丝网印刷RFID标签天线的工艺特点;在分析了标签天线电阻的计算方法的基础上,提出了天线电阻主要受天线墨层厚度和导电油墨导电性能两方面的影响。分别分析了丝网、刮墨刀、丝网目数等因素对天线墨层厚度的影响,以及导电油墨的黏度及导电油墨的干燥效果对其导电性能的影响。为实际生产中,调整丝印RFID天线的电阻提供理论参考。 相似文献
3.
现代电子标签及其印刷技术 总被引:6,自引:3,他引:3
简要介绍了现代电子标签的概念、特点和应用,以及电子标签系统的组成和工作原理.对RFID标签的印刷技术做了较为详细的分析,尤其对电子标签印刷过程中关键的导电油墨的选用和印刷方法的选择进行了详细阐述,最后对电子标签未来的发展前景提出了一点建议和看法. 相似文献
4.
5.
6.
7.
目的 探究纳米银导电油墨及其在柔性印刷电子中的应用。方法 通过总结国内外文献,从纳米银颗粒及其导电油墨的制备、印刷工艺、烧结工艺以及在柔性印刷电子技术中的应用几方面总结近年来的研究进展。结果 在油墨制备及使用中,简化制备工艺、降低生产成本、实现绿色环保、低温烧结,同时提高油墨的基材适应性是未来纳米银导电油墨的改进重点。直写技术具有精度高、速度快等优势,正逐渐替代丝网印刷技术成为主流。烧结工艺的研究重点在于实现低温烧结,其中化学烧结工艺简单,但提高导电性是研究重点。其他烧结方式则设备昂贵,环境要求高。结论 作为功能性电子材料,纳米银导电油墨因出色的电性能和印刷适性,正在被广泛应用于柔性印刷电子中。近年来通过对纳米银及其导电油墨的深入研究及技术改进,在纳米银颗粒的制备、低温烧结技术、节能环保加工工艺等方面获得了一定的进展。与此同时,将其作为功能材料应用于制备柔性传感器中,RFID标签天线、柔性电极、超级电容器、太阳能电池等正受到广泛研究与应用。 相似文献
8.
基于无源RFID标签天线的印刷质量评价模型研究 总被引:1,自引:1,他引:0
为评价无源RFID标签天线的印刷质量,对无源RFID标签天线的质量性能进行了理论分析。针对成品后的天线性能与仿真后的天线性能间存在的差异,在丝网印刷的条件下,以RFID标签天线间的间隙偏差、天线厚度偏差和最大阅读距离偏差为自变量,建立了评价无源RFID标签天线印刷质量的数学线性回归模型,为RFID标签天线在生产过程中的优化提供了一定指导。 相似文献
9.
基于喷墨印刷的RFID标签天线性价比优化方法研究 总被引:3,自引:3,他引:0
以小型偶极子天线为研究对象,采用无选择和选择性2种不同的喷墨印刷方式印制,对比了2种印刷方式下天线的识别距离和油墨耗用量。实验证明,在表面电流密度较高处进行选择性印刷,以增加墨层厚度的方法,有利于降低喷墨印制无源超高频RFID标签天线的成本,性价比明显提高。 相似文献
10.
RFID技术是一种非接触式的自动识别技术,它是通过阅读器发射射频信号,RFID系统的射频信号将通过空间耦合来实现自动识别目标对象并获取相关数据,同时也可以将新的数据信息写入RFID标签的标志设备的技术,[1]是以电子识别手段赋予商品一种智能化内涵的新技术。随着RFID标签的广泛使用,对RFID标签天线的制造方案提出了更高的要求。目前,RFID标签天线的制造工艺主要有四种工艺。本文主要介绍四种RFID标签天线的四种制造工艺方案,并对每种制造工艺方案进行了分析,为RFID标签天线的制造方案提供了理论依据。 相似文献
11.
One of the most popular targets of conductive ink technology is to print RFID tag antennas. However, the printed RFID antennas, manufactured by conductive silver ink which is generally based on microsized silver particles, have lower conductivity and consequently lower radiation efficiency than those by conventional copper etching method. This work demonstrates nano-particle conductive silver ink that is capable of printing UHF RFID antennas with improved radiation efficiency. Compared with commercial micro-particle silver ink, the solid content of metal is much higher in the proposed nanoparticle silver ink, leading to better electrical properties. Two types of dipole antennas are printed with the proposed nano-particle as well as with commercial micro-particle inks. Also, the same antennas are fabricated by copper etching. With these conductive inks, a straight and a meandered dipole antennas are fabricated and their radiation efficiencies are measured with the Wheeler cap method. Experimental results show that the radiation efficiencies of the antennas based on nanoparticle silver ink are superior to those printed with the micro-particle silver ink, and are comparable to those of popular copper antennas. 相似文献
12.
Printed antennas with variable conductive ink layer thickness 总被引:2,自引:0,他引:2
J. Siden M.K. Fein A. Koptyug H.-E. Nilsson 《Microwaves, Antennas & Propagation, IET》2007,1(2):401-407
One of the complex tasks in mass production of RF electronics is printing the communication antenna using electrically conductive ink. For example, this is very common for radio- frequency identification (RFID) tags. Electrical properties of the ink are mostly determined by conductive (e.g. silver) particles mixed into the ink solution and the way they `connect' in the cured ink. It is also desirable to minimise the amount of ink used per antenna, because high-conducting metals like silver used in the ink are rather expensive. Metal-based inks have limited conductivity, so the thicker the cured ink layer will be the better the antenna radiation efficiency can be achieved, but also the higher will be the costs. In the paper, the authors report on the investigations of the possibility of minimising the amount of ink used per antenna. This can be achieved by printing thicker ink layers, where antenna structures are known to have high current density. Two common antenna structures and a dedicated antenna for passive RFID are used in the investigation. The main result of the paper is that radiation efficiency depends primarily on the total amount of ink used for printing the antenna, rather than on the variations of the layer thickness within the antenna structure 相似文献
13.
RFID天线的丝印工艺研究 总被引:2,自引:2,他引:0
为分析优化RFID天线的丝网印刷过程并提高其印刷质量,对丝网印刷工艺对天线印刷精度的各种影响因素进行了分析,包括网目数、印版特性、刮刀角度等各项参数。通过优化丝印工艺参数,印刷了RFID天线并测量了作为主要参数之一的阻抗,结果表明其阻抗波动较小,丝印工艺可满足天线印刷的质量要求。 相似文献
14.
目的 研究碳纳米管对碳系水性导电油墨电热性能的影响,寻找最佳含量的发热油墨。方法 采用单因素法,在原有碳系水性导电油墨中通过添加不同含量的碳纳米管制备多组碳系水性电热油墨。通过测试其SEM、TEM、电热功率、接触角等探究碳系水性电热油墨的最佳制备配方。结果 不同碳纳米管含量的碳系水性电热油墨其发热温度、电功率具有一定的差异。在其他条件一定的情况下,随着碳纳米管含量的增加,碳系水性导电油墨的电热导电性先降低再升高。当碳纳米管质量分数为0.75%时,碳系水性导电油墨的可以达到温度最高(147℃),功率相对较低(4.4 W),此时为导电性最佳碳系水性电热油墨的配方。结论 在导电油墨中添加适量的碳纳米管可改善油墨的加热性能。 相似文献