Modified gold surfaces by 6-(ferrocenyl)hexanethiol/dendrimer/gold nanoparticles as a platform for the mediated biosensing applications

An electrochemical biosensor mediated by using 6-(Ferrocenyl) hexanethiol (FcSH) was fabricated by construction of gold nanoparticles (AuNPs) on the surface of polyamidoamine dendrimer (PAMAM) modified gold electrode. Glucose oxidase (GOx) was used as a model enzyme and was immobilized onto the gold surface forming a self assembled monolayer via FcSH and cysteamine. Cyclic voltammetry and amperometry were used for the characterization of electrochemical response towards glucose substrate. Following the optimization of medium pH, enzyme loading, AuNP and FcSH amount, the linear range for the glucose was studied and found as 1.0 to 5.0 mM with the detection limit (LOD) of 0.6 mM according to S/N = 3. Finally, the proposed Au/AuNP/(FcSH + Cyst)/PAMAM/GOx biosensor was successfully applied for the glucose analysis in beverages, and the results were compared with those obtained by HPLC.     

Immobilization of dendrimers on Si-C linked carboxylic acid-terminated monolayers on silicon(111)

Poly(amidoamine) dendrimers were attached to activated undecanoic acid monolayers, covalently linked to smooth silicon surfaces via Si-C bonds. The resulting ultra-thin dendrimer films were characterized by X-ray photoelectron spectroscopy (XPS), X-ray reflectometry (XR) and atomic force microscopy (AFM). XPS results suggested amide bond formation between the dendrimer and the surface carboxylic acid groups. XR yielded thicknesses of 10 Å for the alkyl region of the undecanoic acid monolayer and 12 Å for the dendrimer layer, considerably smaller than the diameter of these spherical macromolecules in solution. This was consistent with AFM images showing collapsed dendrimers on the surface. It was concluded that the deformation arose from a large number of amine groups on the surface of each dendrimer reacting efficiently with the activated surface, whereby the dendrimers can deform to fill voids while spreading over the activated surface to form a homogeneous macromolecular layer.     

Amine-terminated TEG-derived PAMAM dendrimer as template for preparation of gold nanoparticles in water

Nano-sized monodisperse gold particles (AuNPs) have received significant attention in the past decade, due to their unique physical properties and good chemical stability, which can lead to a wide variety of potential applications. In this work, TEG-derived PAMAM dendrimers with amine-terminating groups were synthesized and characterized by ¹H NMR and FT-IR. These dendrimers were investigated as the templates for preparation of gold nanoparticles through the reduction of HAuCl₄ by NaBH₄ in water. Stable gold nanoparticles with diameters around 10 nm were obtained in the presence of G2.0 – G5.0 dendrimers and characterized by UV-Vis spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The particle size of the produced AuNPs decreased with increasing dendrimer generations. A dendrimer of higher generation has a rigid structure with many end groups on the surface and may play a powerful role in the growth of the AuNPs, as well as having a solid stabilization effect on the AuNPs.     

Electrodeposition of chitosan-glucose oxidase biocomposite onto Pt-Pb nanoparticles modified stainless steel needle electrode for amperometric glucose biosensor

A glucose biosensor was fabricated by electrodepositing chitosan (CS)-glucose oxidase(GOD) biocomposite onto the stainless steel needle electrode (SSN electrode) modified by Pt–Pb nanoparticles (Pt–Pb/SSN electrode). Firstly, Pt–Pb nanoparticles were deposited onto the SSN electrode and then CS-GOD biocomposite was co-electrodeposited onto the Pt–Pb/SSN electrode in a mixed solution containing p-benzoquinone (p-BQ), CS and GOD. The electrochemical results showed that the Pt–Pb nanoparticles can accelerate the electron transfer and improve the effective surface area of the SSN electrode. As a result, the detection range of the proposed biosensor was from 0.03 to 9 mM with a current sensitivity of 0.4485 μA/mM and a response time of 15 s. The Michaelis constant value was calculated to be 4.9837 mM. The cell test results indicated that the electrodes have a low cytotoxicity. This work provided a suitable technology for the fabrication of the needle-type glucose biosensor.     

ENFET glucose biosensor produced with mesoporous silica microspheres

The biosensors based on ENFETs for direct glucose oxidase (GOD) concentration analysis have been fabricated. Mesoporous silica (MS) microspheres of different pore sizes were used as the substrates for immobilizing enzyme to construct ENFETs. The MS microspheres show significantly improved enzyme immobilization capacity. The glucose sensitive ENFET based on the modification of the gate surface of ion-sensitive field-effect transistors (ISFETs) with MS microspheres and glucose oxidase (GOD) shows obviously enhanced sensitivity and extended lifetime compared with the conventional ones. MS microspheres of different pore sizes were investigated and the sensor with remodeled MS microspheres which experienced the pore expanding treatment show better performance than untreated MS microspheres. The fabricated sensors have a linear range of 0.25–2.0 mM, and a detection limit of ca. 0.10 mM. The influence of buffer concentration, ionic strength and pH was discussed. The biosensor also has good stability and reproducibility.     

以酯端基PAMAM树形分子为模板在N，M-二甲基甲酰胺溶剂中制备金纳米粒子

用UV-vis、FT-IR光谱研究了HAuCl4和酯端基聚酰胺胺(PAMAM)树形分子在N，N-二甲基甲酰胺(DMF)溶剂中的相互作用，提出HAuCl4与树形分子之间的络合机理：[AuCl4]^-离子与质子化叔胺基团形成离子对，Au^3 离子与PAMAM树形分子上的酯基和酰胺基团形成配位作用。在DMF溶剂中酯端基PAMAM树形分子与HAuCl4配位后用柠檬酸钠还原形成金纳米粒子，UV-vis光谱和TEM图像分析表明了随树形分子代数的增加，金纳米粒子的直径减小，并提出了树形分子-金纳米复合物的结构模型：(1)较低代数的树形分子环绕在金粒子的外围；(2)在较高代数的树形分子空腔内部封装金纳米粒子。     

Comparative study of conductometric glucose biosensor based on gold and on magnetic nanoparticles

The aim of this study was to show the feasibility and the performances of nanoparticle biosensing. A glucose conductometric biosensor was developed using two types of nanoparticles (gold and magnetic), glucose oxidase (GOD) being adsorbed on PAH (poly(allylamine hydrochloride)) modified nanoparticles, deposited on a planar interdigitated electrode (IDEs). The best sensitivities for glucose detection were obtained with magnetic nanoparticles (70 μM/mM and 3 μM of detection limit) compared to 45 μM/mM and 9 μM with gold nanoparticles and 30 μM/mM and 50 μM with GOD directly cross-linked on IDEs. When stored in phosphate buffer (20 mM, pH 7.3) at 4 °C, the biosensor showed good stability for more than 12 days.     

Preparation of dendrimer SAM on Au substrate and adsorption/desorption of poly-L-glutamate on the SAM

A self-assembled monolayer (SAM) of a dendrimer has been fabricated by covalent bonding of amine-terminated dendrimers to 3-mercaptopropionic acid SAM on an Au substrate, where an amide bond was formed between the amine and the carboxylic acid using amide-coupling reagents. Each reaction step was inspected by transmission surface-enhanced infrared absorption spectroscopy. Reaction was affected by solvents of the coupling reagents and concentrations of the coupling reagents and dendrimers. The pH-dependent adsorption/desorption behavior of sodium poly-L-glutamate (PGA) has been examined on the dendrimer SAM prepared. The adsorbed amount was abundant at acid pH below the pK(a) of carboxylate, while desorption from PGA-adsorbed dendrimer SAM prepared at acid pH proceeded as the pH was raised. The reaction was reversible and reproducible within 30 min under controlled pH, although the carboxylic acid species adsorbed at pH 4.2 was deprotonated to a carboxylate species after more than 30 min of desorption at pH 9.4.     

Amine-terminated TEG-derived PAMAM dendrimer as template for preparation of gold nanoparticles in water

Nano-sized monodisperse gold particles (AuNPs) have received significant attention in the past decade, due to their unique physical properties and good chemical stability, which can lead to a wide variety of potential applications. In this work, TEG-derived PAMAM dendrimers with amine-terminating groups were synthesized and characterized by ¹H NMR and FT-IR. These dendrimers were investigated as the templates for preparation of gold nanoparticles through the reduction of HAuCl₄ by NaBH₄ in water. Stable gold nanoparticles with diameters around 10 nm were obtained in the presence of G2.0–G5.0 dendrimers and characterized by UV-Vis spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The particle size of the produced AuNPs decreased with increasing dendrimer generations. A dendrimer of higher generation has a rigid structure with many end groups on the surface and may play a powerful role in the growth of the AuNPs, as well as having a solid stabilization effect on the AuNPs.     

Glucose biosensors based on dendrimer monolayers

The peculiarities of glucose biosensors based on different generation of dendrimers (G0, G1 and G4) have been studied by amperometry and QCM techniques. It is shown that stable glucose biosensor can be obtained with low generation of dendrimers. The sensor sensitivity, however considerable, increased with increasing number of generation of dendrimers. This can be due to the increased volume of the dendrimer interior as well as with increased number of binding sites for glucose oxidase (GOX). QCM experiments showed that immobilization of GOX resulted in formation of enzyme multilayers on a dendrimer surface. The enzyme turnover for this system (0.1-0.01 s(-1)) was lower then that for immobilization of GOX onto a supported lipid films by means of avidin-biotin technology (1.1 s(-1)). However, dendrimer based biosensors are more stable in comparison with sBLM based sensors and could be stored in a refrigerator in dry conditions over 15 days without substantial loss of sensitivity.     

Multilayer membranes via layer-by-layer deposition of glucose oxidase and Au nanoparticles on a Pt electrode for glucose sensing

We prepared multilayer membranes by the layer-by-layer deposition of glucose oxidase (GOx) and Au nanoparticles (5, 10, or 50 nm φ) on sensor substrates, such as a Pt electrode and a quartz glass plate, to prepare glucose sensors. The enzyme activity of GOx remained even in alternate assemblies, and the activity increased with the increasing number of depositions. The apparent K_m values of the deposited GOx were 28–32 mM, while a reported value in a solution is 33 mM. These results suggest that Au nanoparticles can be used as binders for the deposition of GOx without significant change in the affinity between GOx and glucose.     

Biosensor enhanced by glucose oxidase biomimetic membrane containing the platinum and silica nanoparticles

In this paper, glucose biosensor is fabricated with immobilization of glucose oxidase (GOx) in platinum and silica sol. The glucose biosensor combined with Pt and SiO₂ nanoparticles could make full use of the properties of nanoparticles. A set of experimental results indicates that the current response for the enzyme electrode containing platinum and silica nanoparticles increases from 0.32 µA cm^− 2 to 33 µA cm^− 2 in the solution of 10 mM β-D-glucose. The linear range is 3 × 10^− 5 to 3.8 × 10^− 3 M with a detection limit of 2 × 10^− 5 M at 3σ. The effects of the various volume ratios of Pt and SiO₂ sols with respect to the current response and the stability of the enzyme electrodes are studied.     

Amperometric biosensor based on carbon nanotubes coated with polyaniline/dendrimer-encapsulated Pt nanoparticles for glucose detection

A novel amperometric glucose biosensor based on the nanocomposites of multi-wall carbon nanotubes (CNT) coated with polyaniline (PANI) and dendrimer-encapsulated Pt nanoparticles (Pt-DENs) is prepared. CNT coated with protonated PANI is in situ synthesized and Pt-DENs is absorbed on PANI/CNT composite surface by self-assembly method. Then Glucose oxidase (GOx) is crosslink-immobilizated onto Pt-DENs/PANI/CNT composite film. The results show that the fabricated GOx/Pt-DENs/PANI/CNT electrode exhibits excellent response performance to glucose, such as low detection limit (0.5 µM), wide linear range (1 µM–12 mM), short response time (about 5 s), high sensitivity (42.0 µA mM^? 1 cm^? 2) and stability (83% remains after 3 weeks).     

以树形分子为模板制备金纳米簇及其表征

利用酯端基聚酰胺-胺（PAMAM）树形分子为模板,以N,N-二甲基甲酰胺（DMF）为溶剂,用硼氢化钠还原氯化金制备了树形分子封装的金纳米簇复合物.UV-vis光谱和TEM表征研究表明,分子代数越大,制备的金纳米粒子直径越小,粒径分布越均匀,在DMF溶剂中越稳定.     

Poly(amidoamine)-G5 dendrimers/noble metal gold hybrid nanoparticles prepared by γ-ray irradiation

In the absence of a chemical reductant and other protective reagents, noble metal gold hybrid nanoparticles are successfully prepared by ⁶⁰Co γ-ray irradiation using fifth-generation poly(amidoamine) dendrimer with surface amine-terminated group as polymeric template. The zerovalent gold is of spherical structure and the particle size is on nanometer scale range of 3-12 nm. The size distribution of gold nanoparticles displays multidispersity. The results of FTIR show that interactions between dendrimer template and gold nanoparticle exist in intra-molecule and inter-molecule of fifth-generation poly(amidoamine) dendrimer.     

Fabrication and characterization of platinum black and mesoporous platinum electrodes for in-vivo and continuously monitoring electrochemical sensor applications

Most electrochemical biosensors are disposable due to enzymes that are living creatures. Thus, these are limited to use in in-vivo and continuously monitoring biosensor system applications. The mesoporous (pores with a size of 2-50 nm) platinum (Pt) structure formed on a rod-shaped Pt microelectrode was reported for developments glucose sensors without any enzymes. In this paper, plane Pt electrode (non-treated), Pt black electrode, and mesoporous Pt electrode are fabricated and characterized on a silicon substrate in order to check their usability as enzymeless sensing electrodes for in-vivo and continuously monitoring electrochemical biosensors integrated with silicon CMOS read-out circuitry. The Pt black electrode with rough surface was fabricated by using an electrodeposition technique with hexachloroplatinic acid hydrate (HCPA) solutions. The proposed mesoporous Pt electrode with approximately 3 nm in pore diameter was fabricated by using an electrodeposition technique with nonionic surfactant octaethylene glycol monohexadecyl ether (C₁₆EO₈) and HCPA. The measured current responses at 40 mM glucose solution of the fabricated plane Pt, Pt black, and mesoporous Pt electrodes are approximately 12.4 nA/mm², 2.1 μA/mm², and 2.8 μA/mm², respectively. These data indicate that the mesoporous Pt electrode is much more sensitive than the other Pt electrodes and has strong potential for enzymeless electrochemical sensor applications.     

Molecular electrostatic potentials in the design of dendrimers for the delivery of glitazones

Glitazones are PPARgamma agonistic insulin sensitizers used clinically for the treatment of type-2 diabetes. The delivery of these compounds with the help of dendrimers is possible. Ab initio MO calculations and MESP analysis indicate that the dendrimers with complementary electrostatic potential to glitazones can be designed. The estimated binding strength between one arm of dendrimer and thiazolidinedione is about 15-20 kcal/mol. This binding strength originates from three hydrogen bonds between the dendrimer and each molecule of glitazone. This binding strength is quite suitable for drug encapsulation on the dendrimer based nanoparticles and can be employed for drug delivery.     

树状大分子包裹的金纳米颗粒对PCR优化的影响

以283bp的λDNA的再扩增PCR体系为测试体系,对树状大分子包裹的金纳米颗粒对PCR的作用进行研究,实验证明,包裹有不同浓度胶体金的树状大分子都能对PCR反应起到优化作用,而且随着胶体金浓度的增大,相应树状大分子的优化作用增强,最优浓度越来越低,结果表明,树状大分子包裹的金纳米颗粒的优化机制是胶体金的加入,使树状大分子的＂硬度＂增大,当树状大分子与PCR各组分相互作用时,由于其表面的有效反应基团增多,提高周围PCR各组分有效反应浓度,从而增强反应的效率及特异性。     

Multilayered assembly of dendrimers with enzymes on gold: thickness-controlled biosensing interface

A new approach to construct a multilayered enzyme film on the Au surface for use as a biosensing interface is described. The film was prepared by alternate layer-by-layer depositions of G4 poly(amidoamine) dendrimers and periodate-oxidized glucose oxidase (GOx). The cyclic voltammograms obtained from the Au electrodes modified with the GOx/dendrimer multilayers revealed that bioelectrocatalytic response is directly correlated to the number of deposited bilayers, that is, to the amount of active enzyme immobilized on the Au electrode surface. From the analysis of voltammetric signals, the coverage of active enzyme per GOx/dendrimer bilayer during the multilayer-forming steps was estimated, which demonstrates that the multilayer is constructed in a spatially ordered manner. Also, with the ellipsometric measurements, a linear increment of the film thickness was registered, supporting the formation of the proposed multilayered structure. The E5D5 electrode showed the sensitivity of 14.7 microA x mM(-1) glucose x cm(-2) and remained stable over 20 days under day-by-day calibrations. The proposed method is simple and would be applicable to the constructions of thickness- and sensitivity-controllable biosensing interfaces composed of multienzymes as well as a single enzyme.     

Holographic patterning of luminescent photopolymer nanocomposites

Volume phase gratings in the photopolymerisable composites, containing luminescent nanoparticles have been fabricated for the first time. Nanoparticles of LaPO₄, doped by Ce³⁺ and Tb³⁺ ions (the trade name is REN-X-green) with high luminescence quantum yield were used as a luminescent inorganic additive. The holographic gratings in such materials are formed as a result of the diffusion distribution of the nanoparticles during exposure of photopolymerisable composites to interference pattern. The influence of the pre-polymer formulation and the holographic patterning parameters on the grating formation is comprehensively investigated. The use of the optimised pre-polymer syrup containing two monomers with sufficiently different polymerisation rates allows fabrication of gratings with diffraction efficiency up to 80% at low optical losses (< 5%) (20 μm film thickness). To obtain maximum diffraction efficiency the intensity and the period of the interference pattern were optimised for each formulation. In addition maximum diffraction efficiency was achieved with the nanocomposites containing 30–32 wt.% of nanoparticles. On the other hand the highest possible modulation of the nanoparticles' concentration was obtained for the concentration of about 20 wt.%. In this case maximum ordering of the nanoparticles in the polymer matrix is achieved. The photoluminescence of the nanoparticles within the homogeneous polymer film and within the grating has been measured. The example application of the photopolymerisable composite containing luminescence inorganic nanoparticles in holographic security technology has been demonstrated.