Development and in vitro characterization of chitosan-coated polymeric nanoparticles for oral delivery and sustained release of the immunosuppressant drug mycophenolate mofetil

Objective: To develop an oral sustained release formulation of mycophenolate mofetil (MMF) for once-daily dosing, using chitosan-coated polylactic acid (PLA) or poly(lactic-co-glycolic) acid (PLGA) nanoparticles. The role of polymer molecular weight (MW) and drug to polymer ratio in encapsulation efficiency (EE) and release from the nanoparticles was explored in vitro.

Methods: Nanoparticles were prepared by a single emulsion solvent evaporation method where MMF was encapsulated with PLGA or PLA at various polymer MW and drug: polymer ratios. Subsequently, chitosan was added to create coated cationic particles, also at several chitosan MW grades and drug: polymer ratios. All the formulations were evaluated for mean diameter and polydispersity, EE as well as in vitro drug release. Differential scanning calorimetry (DSC), surface morphology, and in vitro mucin binding of the nanoparticles were performed for further characterization.

Results: Two lead formulations comprise MMF: high MW, PLA: medium MW chitosan 1:7:7 (w/w/w), and MMF: high MW, PLGA: high MW chitosan 1:7:7 (w/w/w), which had high EE (94.34% and 75.44%, respectively) and sustained drug release over 12?h with a minimal burst phase. DSC experiments revealed an amorphous form of MMF in the nanoparticle formulations. The surface morphology of the MMF NP showed spherical nanoparticles with minimal visible porosity. The potential for mucoadhesiveness was assessed by changes in zeta potential after incubation of the nanoparticles in mucin.

Conclusion: Two chitosan-coated nanoparticles formulations of MMF had high EE and a desirable sustained drug release profile in the effort to design a once-daily dosage form for MMF.     

High throughput research and evaporation rate modeling for solvent screening for ethylcellulose barrier membranes in pharmaceutical applications

Context: Ethylcellulose is commonly dissolved in a solvent or formed into an aqueous dispersion and sprayed onto various dosage forms to form a barrier membrane to provide controlled release in pharmaceutical formulations. Due to the variety of solvents utilized in the pharmaceutical industry and the importance solvent can play on film formation and film strength it is critical to understand how solvent can influence these parameters.

Objective: To systematically study a variety of solvent blends and how these solvent blends influence ethylcellulose film formation, physical and mechanical film properties and solution properties such as clarity and viscosity.

Materials and methods: Using high throughput capabilities and evaporation rate modeling, thirty-one different solvent blends composed of ethanol, isopropanol, acetone, methanol, and/or water were formulated, analyzed for viscosity and clarity, and narrowed down to four solvent blends. Brookfield viscosity, film casting, mechanical film testing and water permeation were also completed.

Results and discussion: High throughput analysis identified isopropanol/water, ethanol, ethanol/water and methanol/acetone/water as solvent blends with unique clarity and viscosity values. Evaporation rate modeling further rank ordered these candidates from excellent to poor interaction with ethylcellulose. Isopropanol/water was identified as the most suitable solvent blend for ethylcellulose due to azeotrope formation during evaporation, which resulted in a solvent-rich phase allowing the ethylcellulose polymer chains to remain maximally extended during film formation. Consequently, the highest clarity and most ductile films were formed.

Conclusion: Employing high throughput capabilities paired with evaporation rate modeling allowed strong predictions between solvent interaction with ethylcellulose and mechanical film properties.     

High glass-transition polyurethane-carbon black electro-active shape memory nanocomposite for aerospace systems

Carbon black conductive filler material, 2–40% by weight was added to specially designed polyurethane polymer to prepare shape memory polymer nanocomposites. The synthesised polyurethane (PU) has exhibited a high glass transition temperature of 85°C compared to the reported values in published literatures. The polymer was characterised for its chemical, electrical, thermal and mechanical properties. The stiffness, load-bearing capacity and electrical conductivity were observed to improve with increased carbon loading. It was found to be capable of responding to thermal as well as electrical stimuli. The shape recovery efficiency was found to be 94% for thermal and 98% for electrical stimuli which is among the highest for PU reported so far.

This review was submitted as part of the 2019 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.     

Development of novel pH-sensitive nanoparticles loaded hydrogel for transdermal drug delivery

Objective: Difference of pH that exists between the skin surface and blood circulation can be exploited for transdermal delivery of drug molecules by loading drug into pH-sensitive polymer. Eudragit S100 (ES100), a pH-sensitive polymer having dissolution profile above pH 7.4, is used in oral, ocular, vaginal and topical delivery of drug molecules. However, pH-sensitive potential of this polymer has not been explored for transdermal delivery. The aim of this research work was to exploit the pH-sensitive potential of ES100 as a nanocarrier for transdermal delivery of model drug, that is, Piroxicam.

Methods: Simple nanoprecipitation technique was employed to prepare the nanoparticles and response surface quadratic model was applied to get an optimized formulation. The prepared nanoparticles were characterized and loaded into Carbopol 934 based hydrogel. In vitro release, ex vivo permeation and accelerated stability studies were carried out on the prepared formulation.

Results: Particles with an average size of 25–40?nm were obtained with an encapsulation efficiency of 88%. Release studies revealed that nanoparticles remained stable at acidic pH while sustained release with no initial burst effect was observed at pH 7.4 from the hydrogel. Permeation of these nanocarriers from hydrogel matrix showed significant permeation of Piroxicam through mice skin.

Conclusion: It can be concluded that ES100 based pH-sensitive nanoparticles have potential to be delivered through transdermal route.     

Formulation,optimization, hemocompatibility and pharmacokinetic evaluation of PLGA nanoparticles containing paclitaxel

Objective: Paclitaxel (PTX)-loaded polymer (Poly(lactic-co-glycolic acid), PLGA)-based nanoformulation was developed with the objective of formulating cremophor EL-free nanoformulation intended for intravenous use.

Significance: The polymeric PTX nanoparticles free from the cremophor EL will help in eliminating the shortcomings of the existing delivery system as cremophor EL causes serious allergic reactions to the subjects after intravenous use.

Methods and results: Paclitaxel-loaded nanoparticles were formulated by nanoprecipitation method. The diminutive nanoparticles (143.2?nm) with uniform size throughout (polydispersity index, 0.115) and high entrapment efficiency (95.34%) were obtained by employing the Box–Behnken design for the optimization of the formulation with the aid of desirability approach-based numerical optimization technique. Optimized levels for each factor viz. polymer concentration (X1), amount of organic solvent (X2), and surfactant concentration (X3) were 0.23%, 5?ml %, and 1.13%, respectively. The results of the hemocompatibility studies confirmed the safety of PLGA-based nanoparticles for intravenous administration. Pharmacokinetic evaluations confirmed the longer retention of PTX in systemic circulation.

Conclusion: In a nutshell, the developed polymeric nanoparticle formulation of PTX precludes the inadequacy of existing PTX formulation and can be considered as superior alternative carrier system of the same.     

Inhalable liposomes of Glycyrrhiza glabra extract for use in tuberculosis: formulation,in vitro characterization,in vivo lung deposition,and in vivo pharmacodynamic studies

Objective: The current study involves the development of liposomal dry powder for inhalation (LDPI) containing licorice extract (LE) for use in tuberculosis.

Significance: The current epidemiology of tuberculosis along with the increasing emergence of resistant forms of tuberculosis necessitates the need for developing alternative efficacious medicines for treatment. Licorice is a medicinal herb with reported activity against Mycobacterium tuberculosis.

Methods: Liposomes with LE were prepared by thin film hydration technique and freeze dried to obtain LDPI. The comprehensive in vitro and in vivo characterization of the LDPI formulation was carried out.

Results: The particle size of liposomes was around 210?nm with drug entrapment of almost 75%. Transmission electron microscopy revealed spherical shape of liposome vesicles. The flow properties of the LDPI were within acceptable limits. Anderson Cascade Impactor studies showed the mean median aerodynamic diameter, geometric standard deviation and fine particle fraction of the LDPI to be 4.29?µm, 1.23, and 54.68%, respectively. In vivo lung deposition studies of LDPI in mice showed that almost 46% of the drug administered reaches the lungs and 16% of administered drug is retained in the lungs after 24?hours of administration. The in vivo pharmacodynamic evaluation of the LDPI showed significant reduction in bacterial counts in lungs as well as spleen of TB-infected mice.

Conclusions: LE LDPI thus has a promising potential to be explored as an effective anti-tubercular medicine or as an adjunct to existing anti-tubercular drugs.     

SCC4 cell monolayers as an alternative sublingual barrier model: influence of nanoencapsulation on carvedilol transport

Objective: To evaluate, for the first time, the use of SCC4 cell monolayers as an alternative sublingual barrier model and study the influence of nanoencapsulation on carvedilol transport across SCC4 cell monolayers.

Significance: The sublingual cavity is an interesting route for administration of drugs with limited oral bioavailability due to hepatic first pass metabolism. By this route, the drug is directly absorbed into blood circulation. In this sense, mucoadhesive carvedilol-loaded nanocapsules (CAR-NC) were previously proposed for the administration of this drug by sublingual route. Carvedilol is used for cardiovascular diseases and suffers metabolism in liver when orally administrated. Nanoencapsulation of carvedilol controlled its permeation across porcine sublingual mucosa.

Methods: Carvedilol-loaded cationic nanocapsules were prepared by interfacial deposition of a preformed polymer. Drug permeation studies were carried out in Transwell^® inserts. The integrity of cell monolayers after the drug transport was assessed by transepithelial electric resistance. Compatibility of the CAR-NC with the SCC4 cells was evaluated by the Sulforhodamine B assay.

Results: The drug permeated the cell monolayer by a controlled way when nanoencapsulated and this profile had a linear relation with those observed in porcine sublingual mucosa. The integrity of the cell monolayer was maintained after drug permeation and CAR-NC was no cytotoxic to SCC4 cells.

Conclusion: Nanoencapsulated carvedilol permeated by a controlled and safe way by SCC4 cell monolayer. SCC4 cells monolayers may be used as in vitro model for sublingual drug transport studies in the development of novel formulations.     

Enhanced bioavailability and hepatoprotectivity of optimized ursolic acid–phospholipid complex

Objective: To prepare and characterize an optimized phospholipid complex of Ursolic acid (UA) to overcome the poor pharmacokinetic properties and to investigate the impact of the complex on hepatoprotective activity and bioavailability in animal model.

Significance: UA is a potential phytoconstituent obtained from several plant sources, which has been explored for its diverse pharmacological activities including hepatoprotection. Its major limitation is poor absorption, rapid elimination, and hence low bioavailability after administration.

Methods: Response surface methodology was adopted to formulate an optimized (UA) complex. The complex was characterized by differential thermal analysis (DTA), Fourier transform-Infrared Spectroscopy, Powder X ray Diffraction, molecular docking, etc. The physico-chemical profile (solubility, oil/water partition coefficient) and in vitro dissolution profile was estimated. The formulation was then used to study hepatoprotective activity and bioavailability in animal models.

Results: Results showed that the phospholipid complex of UA has enhanced the hepatoprotective potential as compared to pure UA at the same dose level. The complex restored the levels of serum hepatic marker enzymes with respect to untreated group and increased the relative bioavailability of UA in rat plasma by 8.49-fold in comparison with pure compound at the same dose level. It enhanced the elimination half-life (t_{1/2 el}) from 0.69 ± 1.76 to 8.28 ± 1.98 h.

Conclusion: Complexation of UA with phospholipid markedly enhanced the hepatoprotective potential of UA by improving its bioavailability and pharmacokinetic parameters.

Novelty statement

The present article deals with rational optimization of the formulation parameters for phospholipid complex of ursolic acid by Response Surface Methodology analysis, characterizing the formulation by in silico approach apart from conventional instrumental techniques, and evaluating the in vitro dissolution, pharmacokinetics, and hepatoprotective activity of the complex in animals.

Novelty statement

The present article deals with rational optimization of the formulation parameters for phospholipid complex of ursolic acid by Response Surface Methodology analysis, characterizing the formulation by in silico approach apart from conventional instrumental techniques, and evaluating the in vitro dissolution, pharmacokinetics, and hepatoprotective activity of the complex in animals.     

Formulation development and in vitro evaluation of gentamicin sulfate-loaded PLGA nanoparticles based film for the treatment of surgical site infection by Box–Behnken design

Objective: Gentamicin sulfate (GS)–loaded poly lactic-co-glycolic acid (PLGA) polymeric nanoparticles (PNPs) were developed and incorporated in film for the treatment of surgical site infection (SSI).

Method: PNPs were prepared by double emulsification solvent removal technique using ethyl acetate solution containing PLGA and polyvinyl alcohol (PVA) as an emulsifier. The emulsion was re-emulsified using Gum Kondagogu (GKK). PNPs loaded film was prepared with 5% w/v solution of pullulan in PNPs using solvent casting technique. Design of Experiment (DoE) study using Box–Behnken design was performed for the optimization of PNPs. Drug release study was carried out for PNPs at phosphate buffer saline (PBS) pH 6.4 and simulated wound fluid (SWF) pH 7.4.

Result: PNPs were found to have average particle size 280?±?12.04?nm, polydispersity index (PDI) 0.15?±?0.01 and zeta potential – 4.9?±?0.84?mV. Scanning electron microscopy (SEM) showed spherical nature of PNPs along with particle size of 160?±?35.30?nm confirmed with transmission electron microscopy (TEM). PNPs were found to be effective against Pseudomonas aeruginosa (PA) and Staphylococcus aureus (SA). Optimized batch of film showed in vitro disintegration time below 8?min with tensile strength (TS) 0.06?±?0.03 N/cm² and percentage elongation (% E) 70.95?±?4.29. X-ray diffraction study (XRD) confirmed amorphous nature of GS, PLGA, pullulan, GKK and film.

Conclusion: PNPs showed controlled release of GS after an initial burst release. Developed film can be an effective approach for management of SSI and control of antibiotic induced drug resistance.     

The effect of ferrous ions,calcium ions and citric acid on absorption of ciprofloxacin across caco-2 cells: practical and structural approach

Objective: To study the potential influence of selected metal ions on absorption (and hence oral bioavailability of ciprofloxacin (Cipro) in presence and absence of a competing ligand.

Significance: The presence of metal ions together with Cipro results in complexes exhibiting a decreased bioavailability. Attempts were made to better understand the mechanism of decreased Cipro bioavailability in the presence of metals such as calcium and ferrous ions, and a small-sized ligand citric acid (CitA).

Methods: Effect of complex size or other potential factors was studied using diffusion through synthetic membrane, permeation studies across Caco-2 cells and capillary electrophoresis. A molecular dynamics (MD) simulation study was conducted to find the arrangement and the nature of the interactions between Cipro molecules and ferrous ions.

Results: Cipro was shown to form complexes with metals and CitA. The presence of CitA improved permeation of Cipro through the synthetic membrane but this was not as obvious in case of Caco-2 cells. Capillary electrophoresis suggested the existence of large molecular aggregates of Cipro: metal complexes. MD simulations offered clear evidence of large size aggregates in line with the experimental findings. CitA alone significantly improved permeation of Cipro through Caco-2 cells.

Conclusions: The size of the formed complexes, rather than the decrease in the solubility of formed complexes, plays a significant role in permeation (absorption) of Cipro. CitA might ameliorate the effect of co-administered metal ions on the bioavailability of Cipro.     

Development of a Raman method to follow the evolution of coating thickness of pellets

Context: Although several methods have been investigated to measure the film thickness of tablets and its correlation with the dissolution behavior, much fewer such investigations exist for pharmaceutical pellets.

Objective: To study the possibility of measuring the film thickness and predicting the dissolution behavior of pellets produced in different fluid bed equipments with Raman spectroscopy.

Materials and methods: Pyridoxine hydrochloride-layered pellets were produced and coated in two different Strea-1 equipments. Raman spectra were collected and analysed to set up a calibration model based on the film thickness data calculated from Camsizer analysis results. Dissolution tests were done according to Ph. Eur. standards.

Results: Raman spectroscopy proved to be a good tool in the measurement of film thickness. Polymer weight gain showed a linear correlation with film thickness but was a poor predictor of dissolution results below a threshold value.

Conclusion: The Raman spectroscopic measurement of a small sample can provide accurate data of the film thickness. The investigation suggests that a threshold value might exist for the film thickness above which it can be used to judge future dissolution results.     

Research on the relationship between cephalosporin structure,solution clarity,and rubber closure compatibility using volatile components profile of butyl rubber closures

Objective: Establish an effective experimental strategy to determine the compatibility of rubber closures for drugs.

Significance: Various types of rubber closures with different compositions are available for drug packaging. Many additives of rubber closures can be released from rubber closures and may affect the quality of drugs and pose a risk to human health. In this study, we aimed to determine the relationship between cephalosporin structure, solution clarity, and rubber closure compatibility using volatile components profile of butyl rubber closures.

Methods: Two opposite polarity gas chromatography (GC) systems and GC-mass spectrometry (MS) were used to achieve rapid qualitative determination of the main volatile components in rubber closures. Simulated adsorption experiment was performed to investigate the adsorption of main volatile components in rubber closures by cephalosporins with different side chain structures, and to determine the effects of adsorption on solution clarity.

Results: A volatile components screening library of rubber closures was established and the structures of some volatile component were confirmed. The specific adsorption of the structure of cephalosporins on volatile components from rubber closures was studied.

Conclusion: Based on the results of this study, rubber closures with good compatibility for cephalosporins with different side chain structures can be selected rapidly. This experimental strategy not only facilitates the screening of suitable rubber closures more effectively, but also enables the quick determination of volatile components adsorbed by drugs.     

Physicochemical characterization and thermal behavior of hexosomes containing ketoconazole as potential topical antifungal delivery system

Objective: The main purpose of this article is to show the valuable characteristics that liotropic liquid crystal systems possess to be employed as new drug delivery systems.

Significance: Colloidal aqueous dispersions of lyotropic liquid crystal mesophases such as the identified as cubosomes and hexosomes, and so on, have received considerable attention due to their unique nanostructures and their thermodynamic properties, which provide the potential as a sustained drug release matrix. Additionally, their large surface area and similarity with the liquid crystal structures of intercellular lipids of stratum corneum enhances the interaction with the skin and mucous, increasing the potential for topical drug delivery efficiency of biopharmaceutical class II drugs as the antifungal ketoconazole.

Methods: This article presents the results in morphological characteristics, particle size, ζ potential, flow, thermal behavior and drug release studies of hexosomes containing ketoconazole (LHLC-K) obtained with glycerol monooleate, propylene glycol monolaurate, poloxamer, and water mixtures.

Results: This colloidal system exhibits a Newtonian-type flow and a hexagonal nanostructure with a median particle size of 107?±?20?nm and ζ potential of +4.45?±?0.50?mV. Through differential scanning calorimetry studies, the LHLC-K demonstrated physical and chemical stability for more than six months and mesophasic thermal reversibility between 10 and 50?°C. Finally, LHLC-K releases ketoconazole following a kinetics described by the first order model.

Conclusions: Physicochemical properties of the hexosomes containing ketoconazole are important for topical mycosis treatment administration, conditions of storage, and for its incorporation into the formulation of semi-solid dosage forms.     

Dual cross-linked chitosan microspheres formulated with spray-drying technique for the sustained release of levofloxacin

Objective: This study was aimed to develop sustained drug release from levofloxacin (LF)-loaded chitosan (CS) microspheres for treating ophthalmic infections.

Significance: Dual cross-linked CS microspheres developed by the spray-drying technique displays significantly higher level of sustained drug release compared with non-cross-linked CS microspheres.

Methods: LF-loaded CS microspheres were prepared using the spray-drying technique, and then solidified with tripolyphosphate and glutaraldehyde as dual cross-linking agents. The microspheres were characterized by surface morphology, size distribution, zeta potential, encapsulation efficiency, and drug release profiles in vitro. The drug quantification was verified and analyzed by high-performance liquid chromatography (HPLC). The structural interactions of the CS with LF were studied with Fourier transform infrared spectroscopy. The effect of various influencing excipients in the formulation of the dual cross-linked CS microspheres on drug encapsulation efficiency and the drug release profiles were extensively investigated.

Result: The microspheres demonstrated high encapsulation efficiency (72.4?～?98.55%) and were uniformly spherical with wrinkled surface. The mean particle size was between 1020.7?±?101.9 and 2381.2?±?101.6?nm. All microspheres were positively charged (zeta potential ranged from 31.1?±?1.32 to 42.81?±?1.55?mV). The in vitro release profiles showed a sustained release of the drug and it was remarkably influenced by the cross-linking process.

Conclusion: This novel spray-drying technique we have developed is suitable for manufacturing LF-loaded CS microspheres, and thus could serve as a potential platform for sustained drug release for effective therapeutic application in ocular infections.     

Proof-of-concept preparation and characterization of dual-drug amorphous nanoparticle complex as fixed-dose combination of poorly soluble drugs

Objectives: To carry out a proof-of-concept study on the development of dual-drug amorphous nanoparticle complex (nanoplex in short) as a potential formulation platform for fixed-dose combination (FDC) of poorly-soluble drugs.

Significance: FDC has been proven effective in improving patient compliance for treatment that requires complex multidrug regimen. Currently, there is growing interest to develop FDC of poorly-soluble drugs due to the increased number of drugs exhibiting poor solubility thus low bioavailability.

Methods: The dual-drug nanoplex was prepared by electrostatically-driven co-complexation of drug molecules with oppositely charged dextran sulfate, using ciprofloxacin (CIP) and itraconazole (ITZ) as the model poorly-soluble drugs.

Results: We first verified that the co-complexation products were dual-drug CIP-ITZ nanoplex, and not binary mixtures of the single-drug CIP and ITZ nanoplexes, by demonstrating their distinct thermal behaviors and dissolution characteristics. Depending on the preparation condition, the dual-drug nanoplex exhibited size and zeta potential of 160–410?nm and ?35–50?mV, respectively. The individual drug payloads were readily manipulated by varying the CIP/ITZ mass ratio in the feed, resulting in CIP and ITZ payloads in the range of 60-30% and 15-45%, respectively. The CIP-ITZ nanoplex, however, exhibited diminished CIP supersaturation generation, thus lower CIP solubility enhancement, compared to the single-drug CIP nanoplex. The CIP-ITZ nanoplex, nonetheless, remained capable of generating high ITZ supersaturation level.

Conclusion: Dual-drug nanoplex was successfully prepared with a high degree of control over its physical characteristics. Nevertheless, whether dual-drug nanoplex always exhibits diminished solubility enhancement compared to its single-drug counterparts needs to be investigated using different poorly-soluble drugs.     

A comparison of drug substance predicted chemical stability with ICH compliant stability studies

Objective: The aim of this study is to demonstrate the applicability of predictive stability studies to the degradation of drug substances.

Significance: The use of predicted stability studies during pharmaceutical development and in regulatory submissions is increasing, particularly in early phase to support an initial retest period/shelf life claim in the absence of standard stability data. These studies offer an alternative to standard stability testing and can facilitate clinical trials to be started earlier and medicines to reach patients faster. They involve a short-term stressed stability study, typically designed to degrade a drug substance or product to the specification level of the shelf life limiting attribute. The results are used to predict degradation under long-term storage conditions and enable stability understanding to be gained over a short time frame, using limited amounts of material.

Methods: In this work, Accelerated Stability Assessment Program (ASAP) studies were performed for 10 different drug substances and the predictions obtained for chemical degradation were compared to ICH compliant stability data.

Results: Across the studies good agreement was achieved, with the initial retest period predictions from the ASAP studies being conservative by design. When minimal degradation was observed during an ASAP study, it was demonstrated that at least a 12-month initial retest period could be supported.

Conclusion: This comparison of ASAP predictions and ICH compliant stability data has demonstrated the ability of well-designed ASAP studies to predict the long-term chemical stability of drug substances.     

Effect of hydrophilic and hydrophobic polymers on permeation of S-amlodipine besylate through intercalated polymeric transdermal matrix: 3(2) designing,optimization and characterization

Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.

Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.

Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm²/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.

Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug.     

Low molecular weight chitosan-based conjugates for efficient Rhein oral delivery: synthesis,characterization, and pharmacokinetics

Objective: This article aims to design low molecular weight chitosan (LMWC)-based conjugates of Rhein (RH) by means of an amino acid linker (Alanine) for improved solubility and enhanced bioavailability.

Significance: Rhein is a potential candidate for the therapy of kidney disease. However, the poor solubility, inadequate bioavailability, and lack of proper formulation restrict its clinical applicability. LMWC-drug conjugates offer the potential to improve the water-solubility of RH, increase its oral absorption, and thereby enhance its bioavailability.

Methods: The conjugates were synthesized via a carbodiimide reaction and confirmed using UV-vis, FTIR, and ¹H-NMR spectroscopy. The water-solubility and in vitro release properties were evaluated. Free RH and RH-LMWC conjugates were administered at an equivalent oral gavage dose of RH at 35?mg/kg for pharmacokinetic studies in Sprague Dawley rats.

Results: The conjugates with RH content of 9.65% were successfully synthesized and featured a satisfactory water-solubility of 9.73?mg/mL, which exhibited a sustained release pattern over 72?h, and the enzymes present may promote the degradation of the conjugate to increase the release of Rhein. Oral administration of RH-LMWC conjugates to rats led to seven-folds and 3.1-folds increase in the T_1/2 and AUC_0–∞, respectively, as compared to RH suspension.

Conclusion: The present work demonstrated that the RH-LMWC conjugates exhibited sustained release properties with outstanding oral bioavailability enhancements compared to administration of RH itself. Potentially, RH-LMWC conjugates may serve as a promising lead for developing a new platform for RH oral delivery.     

Influencing factors on gelatin matrix for chlorhexidine delivery

Objective: The objective was to evaluate the influencing factors in the fabrication of gelatin matrix (gelatin chips) for drug delivery. The attributes affecting drug release characteristics of the gelatin products were examined.

Significance: Understanding the attributes that affect drug release from gelatin matrix could provide the knowledge base for the development, manufacturing, and performance evaluation of gelatin-based drug products for sustained drug delivery.

Methods: Chlorhexidine (CHX) was the model drug in the gelatin-product testing. The gelatin products were fabricated by two methods: a single-pot mixing of all the components and a two-step gelatin crosslinking followed by drug loading. Different gelatin types (Type A porcine and Type B bovine), glutaraldehyde (GTA) crosslinking conditions, glycerin concentration, and CHX concentration in drug loading and loading time were used to fabricate the products. The cumulative amounts of CHX release from the gelatin products were determined using in vitro release testing (IVRT).

Results: The attributes affecting CHX release from the gelatin products were gelatin type, GTA crosslinking, and CHX loading concentration. The fabrication methods (two-step method of gelatin crosslinking and drug loading by equilibration vs. direct mixing of the components) also affected CHX release. Other attributes such as glycerin and CHX loading time did not show significant effects on drug release under the conditions studied. In addition, the results in the two IVRT methods employed in this study were comparable.

Conclusion: Gelatin products of qualitative (Q1) and quantitative (Q2) differences could lead to different drug release behaviors. Drug release was also affected by the ingredient mixing steps during gelatin chip fabrication.