Synthesis,structure and thermoelectric properties of $$\mathrm{La}_{1-x}\mathrm{Na}_{x}\mathrm{CoO}_{3 }$$ perovskite oxides

Monovalent ion doped lanthanum cobaltate \(\hbox {La}_{1-x}\hbox {Na}_{x}\hbox {CoO}_{3 }\) (\(0 \le x \le 0.25\)) compositions were synthesized by the nitrate–citrate gel combustion method. All the heat treatments were limited to below 1123 K, in order to retain the Na stoichiometry. Structural parameters for all the compounds were confirmed by the Rietveld refinement method using powder X-ray diffraction (XRD) data and exhibit the rhombhohedral crystal structure with space group R-3c (No. 167). The scanning electron microscopy study reveals that the particles are spherical in shape and sizes, in the range of 0.2–0.5 \(\upmu \)m. High temperature electrical resistivity, Seebeck coefficient and thermal conductivity measurements were performed on the high density hot pressed pellets in the temperature range of 300–800 K, which exhibit p-type conductivity of pristine and doped compositions. The X-ray photoelectron spectroscopy (XPS) studies confirm the monotonous increase in \(\hbox {Co}^{4+}\) with doping concentration up to \(x = 0.15\), which is correlated with the electrical resistivity and Seebeck coefficient values of the samples. The highest power factor of \(10~\upmu \hbox {W~mK}^{-2 }\) is achieved for 10 at% Na content at 600 K. Thermoelectric figure of merit is estimated to be \({\sim }1 \times 10^{-2}\) at 780 K for 15 at% Na-doped samples.     

Effect of Previous Milling of Precursors on Magnetoelectric Effect in Multiferroic {\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}} Ceramic

$\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 magnetoelectric (ME) ceramics have been synthesized and investigated. The ME effect can be described as an induced electric polarization under an external magnetic field or an induced magnetization under an external electric field. The materials in the ME effect are called ME materials, and they are considered to be a kind of new promising materials for sensors, processors, actuators, and memory systems. Multiferroics, the materials in which both ferromagnetism and ferroelectricity can coexist, are the prospective candidates which can potentially host the gigantic ME effect. $\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 , an Aurivillius compound, was synthesized by sintering a mixture of $\mathrm{Bi}_{2}\mathrm{O}_{3}, \mathrm{Fe}_{2}\mathrm{O}_{3}$ Bi 2 O 3 , Fe 2 O 3 , and $\mathrm{TiO}_{2}$ TiO 2 oxides. The precursor materials were prepared in a high-energy attritorial mill for (1, 5, and 10) h. The orthorhombic $\mathrm{Bi}_{5}\mathrm{Ti}_{3}\mathrm{FeO}_{15}$ Bi 5 Ti 3 FeO 15 ceramics were obtained by a solid-state reaction process at 1313 K. The ME voltage coefficient ( $\alpha _\mathrm{ME}$ α ME ) was measured using the dynamic lock-in method. The highest ME voltage coefficient ( $\alpha _\mathrm{ME} = 8.28\,\text{ mV }{\cdot }\text{ cm }^{-1}{\cdot }\text{ Oe }^{-1})$ α ME = 8.28 mV · cm ? 1 · Oe ? 1 ) is obtained for the sample milled for 1 h at $H_\mathrm{DC }= 4$ H DC = 4  Oe (1 Oe = 79.58  $\text{ A }{\cdot }\text{ m }^{-1})$ A · m ? 1 ) .     

Investigation on the impact and compression behavior of wet \upgamma -\hbox {Al}_{2}\mathrm{O}_{3} granules

The material behavior of dominant elastic–plastic \(\upgamma \) - \(\hbox {Al}_{2}\mathrm{O}_{3}\) granules has been experimentally studied by means of quasi static compression tests and dynamic impact tests until fracture. The obtained distributions of breakage velocity and specific breakage energy are compared. Thus, velocity dependent influences at stressing like viscous behavior can be derived. Additionally, the influences of particle size and moisture content on the material behavior are investigated.     

Energy Bands and Thermoelectricity of Filled Skutterudite $$\mathrm{EuRu}_{4}\mathrm{As}_{12}$$

Density functional theory-based calculations of the elastic and electronic properties with magnetic moments of the filled skutterudite \(\mathrm{EuRu}_{4}\mathrm{As}_{12}\) have been performed in its ferromagnetic ground state. The full-potential linearized augmented plane wave (FP-LAPW) method has been used for the study presented here. The numerical values of the elastic parameters are estimated within the framework of the Voigt–Reuss–Hill approximations. The energy band structure calculation performed near the Fermi energy level shows the metallic nature of the material with a high value of Seebeck coefficient (S). The presence of an exchange splitting of Eu-4f states suggests their appreciable contribution toward the magnetic behavior. The analysis of the thermal transport properties confirms the result obtained from the electronic structure calculation with Seebeck coefficient of \(118\,\,\upmu \hbox {V/K}\) and the figure of merit (ZT) value of 0.51, at room temperature. The estimated values of S and ZT indicate the possibility of the thermoelectric applications of the sample material.     

Prediction of Mass Evaporation of \mathrm{Fe}_{50}\mathrm{Co} _{50} During Measurements of Thermophysical Properties Using an Electrostatic Levitator

This paper describes the prediction of mass evaporation of \(\mathrm{Fe}_{50}\mathrm{Co} _{50}\) at% alloys during thermophysical property measurements using the electrostatic levitator at NASA Marshall Space Flight Center in Huntsville, AL. The final mass, final composition, and activity of individual component are considered in the calculation of mass evaporation. The predicted reduction in mass and variation in composition are validated with six ESL samples which underwent different thermal cycles. The predicted mass evaporation and composition shift show good agreement with experiments with the maximum relative errors of 4.8 % and 1.7 %, respectively.     

Superconducting epitaxial $$\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }$$ on $$\hbox {SrTiO}_{3}$$SrTiO3-buffered Si(001)

Thin films of optimally doped(001)-oriented \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) are epitaxially integrated on silicon(001) through growth on a single crystalline \(\hbox {SrTiO}_{3}\) buffer. The former is grown using pulsed-laser deposition and the latter is grown on Si using oxide molecular beam epitaxy. The single crystal nature of the \(\hbox {SrTiO}_{3}\) buffer enables high quality \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) films exhibiting high transition temperatures to be integrated on Si. For a 30-nm thick \(\hbox {SrTiO}_{3}\) buffer, 50-nm thick \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) films that exhibit a transition temperature of \(\sim \)93 K, and a narrow transition width (<5 K) are achieved. The integration of single crystalline \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) on Si(001) paves the way for the potential exploration of cuprate materials in a variety of applications.     

Effect of Hafnium Impurities on the Magnetoresistance of $$\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }$$

In the present study, we investigate the influence of the hafnium (Hf) impurities on the magnetoresistance of \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }\) ceramic samples in the temperature interval of the transition to the superconducting state in constant magnetic field up to 12 T. The cause of the appearance of low- temperature “tails” (paracoherent transitions) on the resistive transitions, corresponding to different phase regimes of the vortex matter state is discussed. At temperatures higher than the critical temperature (T > \(T_\mathrm{c})\), the temperature dependence of the excess paraconductivity can be described within the Aslamazov–Larkin theoretical model of the fluctuation conductivity for layered superconductors.     

Radiative Properties of Ceramic $$\hbox {Al}_{2}\hbox {O}_{3}$$, AlN,and $$\hbox {Si}_{3}\hbox {N}_{4}$$Si3N4: I. Experiments

The radiative properties of dense ceramic \(\hbox {Al}_{2}\hbox {O}_{3}\), AlN, and \(\hbox {Si}_{3}\hbox {N}_{4}\) plates are investigated from the visible to the mid-infrared region at room temperature. Each specimen has different surface finishings on different sides of the laminate. A monochromator was used with an integrating sphere to measure the directional-hemispherical reflectance and transmittance of these samples at wavelengths from 0.4 \(\upmu \hbox {m}\) to 1.8 \(\upmu \hbox {m}\). The specular reflectance was obtained by a subtraction technique. A Fourier-transform infrared spectrometer was used to measure the directional-hemispherical or specular reflectance and transmittance with appropriate accessories from about 1.6 \(\upmu \hbox {m}\) to 19 \(\upmu \hbox {m}\). All measurements were performed at near-normal incidence on either the smooth side or the rough side of the sample. The experimental observations are qualitatively interpreted considering the optical constants, surface roughness, and volume scattering and absorption.     

A Study of Some Thermophysical Parameters in Glassy \mathrm{{Se}}_{80}\mathrm{{Te}}_{20} and \mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10} (Cd, In, and Sb) Alloys

The present paper reports a comparative study of some thermophysical properties (thermal conductivity, thermal diffusivity, thermal effusivity, and specific heat per unit volume) for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{20}$ Se 80 Te 20 and $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10}$ Se 80 Te 10 M 10 (Cd, In, and Sb) alloys. The transient plane source technique is used for this purpose. The thermal conductivity is highest for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{In}}_{10}$ Se 80 Te 10 In 10 as compared to the other ternary alloys. This is explained in terms of the thermal conductivity of additive elements Cd, In, and Sb. The composition dependence of the thermal diffusivity and specific heat per unit volume is also discussed.     

Synthesis and enhanced photocatalytic activity of g-$$\hbox {C}_{3}\mathrm{N}_{4}$$ hybridized CdS nanoparticles

The highly effective g-\(\hbox {C}_{3}\hbox {N}_{4}\) hybridized CdS photocatalysts were synthesized via a successive calcination and hydrothermal process. The as-prepared photocatalysts were characterized by X-ray powder diffraction, transmission electron microscopy and UV–Vis diffuse reflectance spectroscopy. The photocatalytic performance of the \(\hbox {C}_{3}\hbox {N}_{4}\)/CdS nanocomposites was evaluated by the photodegradation of RhB under visible light irradiation. The results showed that photocatalytic ability of the \(\hbox {C}_{3}\hbox {N}_{4}\)/CdS nanocomposites was higher than that of pure \(\hbox {C}_{3}\hbox {N}_{4}\) and CdS. The enhanced photocatalytic activity could be attributed to the high separation efficiency of the photo-excited electron-hole pairs. A possible mechanism of the photocatalytic degradation of RhB on \(\hbox {C}_{3}\hbox {N}_{4}/\)CdS nanocomposites was also proposed.     

Microstructural and electrical transport properties of uniaxially pressed $$\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2.5}\text {Cu}_{3.5}\text {O}_{10+\delta }$$ ceramic superconductors

We have studied the effect of the pelletization pressure on microstructural and electrical transport properties of superconducting ceramics with starting composition given by the formula \(\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2.5}\text {Cu}_{3.5}\text {O}_{10+\delta }\). The experimental data of electrical measurements was processed in order to obtain the weak-link resistivity, the orientation probability of the grains’ a-axes along a certain preferential direction, the slope of the linear part in the temperature dependence of the ab-planes resistivity, and the intrinsic effective anisotropy of the grains, of each sample. In contrast with the behaviour of \(\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2}\text {Cu}_{3}\text {O}_{10+\delta }\) ceramics, the Ca, Cu enriched samples exhibit a reduction of their effective anisotropy at sample level and weak links resistivity with increasing compacting pressures. In addition, a compacting pressure of around 488 MPa may affect considerably the electrical and structural parameters of the material. The results suggest that a combined effect of the pelletization pressure and the doping with Ca and Cu can be used to improve the electrical transport properties of these materials for technological applications.     

Study of Structural Modification and Fluctuation Induced Electrical Conductivity in \text {YBa}_{2}\text {Cu}_{3}\text {O}_{7-y}+x \text {BaSnO}_{3} Superconductor Composite

A series of \((1-x) \text {YBa}_{2}\text {Cu}_{3}\text {O}_{7-y} + x \text {BaSnO}_{3 }(x = 0.0, 0.1, 0.3, 0.5, 1.0, 2.5, 5.0\,\text {wt}{\%})\) samples were prepared using the solid-state reaction method. XRD graphs confirm the orthorhombic structure in pristine as well as in composite samples. Raman spectra show the presence of all the vibration modes in pure as well as in the composite samples. In addition, some defect-induced modes have also appeared in the higher weight % BSO-added sample, and no loss of apical oxygen O(4) at 500 cm \(^{-1}\) occurs due to BaSnO \(_{3}\) (BSO) addition. Microstructural analysis reveals the unchanged grain size with the incorporation of dielectric BSO particles in the YBCO matrix. Superconducting transition temperature determined from standard four-probe method decreases with the increase of BSO wt%. Excess conductivity fluctuation analysis using Aslamazov–Larkin model fitting reveals transition of two dominant regions (2D and 3D) above \(T_\mathrm{c}\) . 2D to 3D crossover temperature i.e. Lawrence–Doniach temperature that demarcates dimensional nature of fluctuation inside the grains is influenced by BSO incorporation in YBCO matrix.     

Inhomogeneous Superconducting Behaviour in $$\hbox {La}_{5}\hbox {Ni}_{2}\hbox {Si}_{3}$$

The superconducting phase transition at \(T_\mathrm{c} = 2.3\) K was observed for the electrical resistivity \(\rho ({T})\) and magnetic susceptibility \(\chi (T)\) measurements in the ternary compound La\(_{5}\hbox {Ni}_{2}\hbox {Si}_{3}\) that crystallizes in the hexagonal-type structure. Although a single-phase character with the nominal stoichiometry of the synthesized sample was confirmed, a small trace of the La–Ni phase was found, being probably responsible for the superconducting behaviour in the investigated compound. The magnetization loop recorded at \({T} = 0.5\) K resembles a star-like shape which indicates that the density of the critical current can be strongly suppressed by a magnetic field. The low-\(T _{\rho }(T)\) and specific heat \({C}_\mathrm{p}({T})\) data in the normal state reveal simple metallic behaviour. No clear evidence of a phase transition to any long- or short-range order was found for \(C_\mathrm{p}(T)\) measurements in the T-range of 0.4–300 K.     

Thermal Emittance of $$\hbox {La}_{0.7}\hbox {Ca}_{0.3-x}\hbox {K}_x\hbox {MnO}_3$$ Coatings on Aluminum Substrate

A novel thermal control coating was presented based on the thermochromism of manganite. The pigment of K-doped manganite nanoparticles was dispersed into polymer matrix to prepare the coating with curing below 200 \(^{\circ }\)C. The nanoparticles size mainly distributes around 100–200 nm, and it shows a comparable stoichiometric ratio. The phase transition of the nanoparticles was observed from ferromagnetic metallic to paramagnetic insulator state. With increasing K doping level, the phase transition temperature increases, achieving controllable adjustment. Coating surface with and without pore defect was obtained by different polymer matrix. A sharp emittance variation was observed with increasing temperature in K-doped coating. The variation magnitude of emittance is up to 0.46, which is attractive to space thermal control. It is suggested that the pigment content of 50 wt% is sufficient to realize a large emittance variation.     

Temperature effects on the electrical characteristics of $$\mathrm{Al}/\mathrm{PTh}-\mathrm{SiO}_{2}/\mathrm{p\hbox {-}Si}$$ structure

The temperature-dependent current–voltage (\(I\text {--}V\)) and capacitance–voltage (\(C\text {--}V\)) characteristics of the fabricated Al/p-Si Schottky diodes with the polythiopene–SiO\(_{2}\) nanocomposite (\(\hbox {PTh--SiO}_{2}\)) interlayer were investigated. The ideality factor of \(\hbox {Al}/\hbox {PTh--SiO}_{2}/{p}\text {-Si}\) Schottky diodes has decreased with increasing temperature and the barrier height has increased with increasing temperature. The change in the barrier height and ideality factor values with temperature was attributed to inhomogeneties of the zero-bias barrier height. Richardson plot has exhibited curved behaviour due to temperature dependence of barrier height. The activation energy and effective Richardson constant were calculated as 0.16 eV and \(1.79 \times 10^{-8} \hbox {A\,cm}^{-2} \,\hbox {K}^{-2}\) from linear part of Richardson plots, respectively. The barrier height values determined from capacitance–voltage–temperature (\(C\text {--}V\text {--}T\)) measurements decrease with increasing temperature on the contrary of barrier height values obtained from \(I\text {--}V\text {--}T\) measurements.