Improved solubility and oral bioavailability of apigenin via Soluplus/Pluronic F127 binary mixed micelles system

The aim of this study was to develop a novel mix micelles system composing of two biocompatible copolymers of Soluplus^® and Pluronic F127 to improve the solubility, oral bioavailability of insoluble drug apigenin (AP) as model drug. The AP-loaded mixed micelles (AP-M) were prepared by ethanol thin-film hydration method. The formed optimal formulation of AP-M were provided with small size (178.5?nm) and spherical shape at ratio of 4:1 (Soluplus^®:Pluronic F127), as well as increasing solubility of to 5.61?mg/mL in water which was about 3442-fold compared to that of free AP. The entrapment efficiency and drug loading of AP-M were 95.72 and 5.32%, respectively, and a sustained release of AP-M was obtained as in vitro release study indicated. Transcellular transport study showed that the cell uptake of AP was increased in Caco-2 cell transport models. The oral bioavailability of AP-M was 4.03-fold of free AP in SD rats, indicating the mixed micelles of Soluplus^® and Pluronic F127 is an industrially feasible drug delivery system to promote insoluble drug oral absorption in the gastrointestinal tract.     

Enteric-coated epichlorohydrin crosslinked dextran microspheres for site-specific delivery to colon

Abstract

Enteric-coated epichlorohydrin crosslinked dextran microspheres containing 5-Fluorouracil (5-FU) for colon drug delivery was prepared by emulsification-crosslinking method. The formulation variables studied includes different molecular weights of dextran, volume of crosslinking agent, stirring speed, time and temperature. Dextran microspheres showed mean entrapment efficiencies ranging between 77 and 87% and mean particle size ranging between 10 and 25?µm. About 90% of drug was released from uncoated dextran microspheres within 8?h, suggesting the fast release and indicated the drug loaded in uncoated microspheres, released before they reached colon. Enteric coating (Eudragit-S-100 and Eudragit-L-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method. The release study of 5-FU from coated dextran microspheres was complete retardation in simulated gastric fluid (pH 1.2) and once the coating layer of enteric polymer was dissolved at higher pH (7.4 and 6.8), a controlled release of the drug from the microspheres was observed. Further, the release of drug was found to be higher in the presence of dextranase and rat caecal contents, indicating the susceptibility of dextran microspheres to colonic enzymes. Organ distribution and pharmacokinetic study in albino rats was performed to establish the targeting potential of optimized formulation in the colon.     

Preparation of an optimized ciprofloxacin-loaded chitosan nanomicelle with enhanced antibacterial activity

Objective: The objective of this study was to evaluate the effect of lipid structure on physicochemical properties of chitosan-fatty acid nanomicelles and prepare an optimum ciprofloxacin-loaded formulation from these conjugates which could enhance the antibacterial effects of drug against some important pathogens like P. aeruginosa.

Significance: Nowadays, resistance in infectious diseases is a growing worldwide concern. Nanocarriers can increase the therapeutic index and consequently reduce the antibiotic resistance. By site-specific delivery of drug, the adverse effects of broad-spectrum antibiotics such as ciprofloxacin would be reduced.

Methods: Fatty acid grafted chitosan conjugates were synthetized in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The effects of fatty acid type (stearic acid, palmitic acid, and linoleic acid) on physicochemical properties of conjugates were investigated. Ciprofloxacin was encapsulated in nanomicelles by thin film hydration method. Also, the preparation process was optimized with a central composite design. The antibacterial effect of optimum formulation against P. aeruginosa, K. pneumoniae, and S. pneumoniae species was determined.

Results: All conjugates were synthetized with high yield values and the substitution degrees ranged between 2.13 and 35.46%. Ciprofloxacin was successfully encapsulated in nanomicelles. The optimum formulation showed high drug loading (≈?19%), with particle size of about 260?nm and a sustained release profile of ciprofloxacin. The minimum inhibitory concentrations of ciprofloxacin in optimum formulation against P. aeruginosa and K. pneumoniae species were 4 and 2 times lower in comparison with the free drug, respectively.

Conclusions: The antibacterial effect of ciprofloxacin was improved by encapsulation of drug in chitosan nanomicelles.     

Preparation,characterization, and pharmacokinetics study of a novel genistein-loaded mixed micelles system

Genistein (GEN), is a natural dietary isoflavone, has been reported to show anticancer activities. However, its poor aqueous solubility and oral bioavailability limit its clinical application. We designed a novel genistein-loaded mixed micelles (GEN-M) system composed of Soluplus^® and Vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) were prepared by organic solvent evaporation aimed to overcome the challenges of GEN’s poor solubility and then further improve its oral bioavailability. The optimized, spherical-shaped GEN-M was obtained at a ratio of 10:1 (Soluplus^®:TPGS). The mean particle size of GEN-M was 184.7?±?2.8?nm, with a narrow polydispersity index (PDI) of 0.162?±?0.002. The zeta potential value of GEN-M was ?2.92?±?0.01?mV. The micelles solutions was transparent with blue opalescence has high the entrapment efficiency (EE) and drug loading (DL) of 97.12?±?2.11 and 3.87?±?1.26%, respectively. GEN-M was demonstrated a sustained release behavior when formed micelles shown in drug release in vitro. The solubility of GEN in water increased to 1.53?±?0.04?mg/mL after encapsulation. The permeability of GEN across a Caco-2 cell monolayer was enhanced, and the pharmacokinetics study of GEN-M showed a 2.42-fold increase in relative oral bioavailability compared with free GEN. Based on these findings, we conclude that this novel nanomicelles drug delivery system could be leveraged to deliver GEN and other hydrophobic drugs.     

Evaluation of starch based cryogels as potential biomaterials for controlled release of antibiotic drugs

In the present study starch has been blended with poly(vinyl alcohol) to design macroporous architectures following a repeated freeze-thaw method. These macroporous cryogels were loaded with an antibiotic drug, ciprofloxacin hydrochloride (Cfx), and evaluated for its in vitro delivery in a completely controlled manner thus exploring possibilities to use it as a biomaterial in burn or wound healing applications. The key advantage of the present system is that cryogels formed do not contain any chemical crosslinking agent which is often harmful to organic compounds. These Cfx loaded cryogels were characterized by infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) techniques. The controlled release of Cfx drug from cryogels was investigated under varying experimental conditions such as percent loading of the antibiotic drug, chemical architecture of the cryogels and pH, temperature, and nature of the release media. The prepared cryogels show promise to provide a possible pathway for controlling delivery of antibiotic drug thus minimizing the known side effects and improving efficacy also.     

Formulation and in vitro evaluation of prolonged release floating microspheres of atenolol using multicompartment dissolution apparatus

The aim of the present work was to prepare floating microspheres of atenolol as prolonged release multiparticulate system and evaluate it using novel multi-compartment dissolution apparatus. Atenolol loaded floating microspheres were prepared by emulsion solvent evaporation method using 3² full factorial design. Formulations F1 to F9 were prepared using two independent variables (polymer ratio and % polyvinyl alcohol) and evaluated for dependent variables (particle size, percentage drug entrapment efficiency and percentage buoyancy). The formulation(F8) with particle size of 329?±?2.69 µm, percentage entrapment efficiency of 61.33% and percentage buoyancy of 96.33% for 12?h was the of optimized formulation (F8). The results of factorial design revealed that the independent variables significantly affected the particle size, percentage drug entrapment efficiency and percentage buoyancy of the microspheres. In vitro drug release study revealed zero order release from F8 (98.33% in 12?h). SEM revealed the hollow cavity and smooth surface of the hollow microspheres.     

Topical phenytoin nanostructured lipid carriers: design and development

Phenytoin (PHT) is an antiepileptic drug that was reported to exhibit high wound healing activity. Nevertheless, its limited solubility, bioavailability, and inefficient distribution during topical administration limit its use. Therefore, this study aims to develop, characterize nanostructured lipid carriers (NLCs), and evaluate their potential in topical delivery of PHT to improve the drug entrapment efficiency and sustained release. The NLCs were prepared by hot homogenization followed by ultra sonication method using 2³ factorial design. NLC formulations were characterized regarding their particle size (PS), zeta potential (ZP), entrapment efficiency percent (%EE), surface morphology, physicochemical stability, and in vitro release studies. The optimized NLC (F7) was further incorporated in 1%w/v carbopol gel and then characterized for appearance, pH, viscosity, stability, and in vitro drug release. The prepared NLCs were spherical in shape and possessed an average PS of 121.4–258.2?nm, ZP of (?15.4)–(–32.2)?mV, and 55.24–88.80 %EE. Solid-state characterization revealed that the drug is dispersed in an amorphous state with hydrogen bond interaction between the drug and the NLC components. NLC formulations were found to be stable at 25?°C for six months. The stored F7-hydrogel showed insignificant changes in viscosity and drug content (p>.05) up to six?months at 25?°C that pave a way for industrial fabrication of efficient PHT products. In vitro release studies showed a sustained release from NLC up to 48?h at pH 7.4 following non-Fickian Higuchi kinetics model. These promising findings encourage the potential use of phenytoin loaded lipid nanoparticles for future topical application.     

Artesunate-loaded chitosan/lecithin nanoparticles: Preparation,characterization, and in vivo studies

Artesunate (AST), the most widely used artemisnin derivative, has poor aqueous solubility and suffers from low oral bioavailability (~40%). Under these conditions, nanoparticles with controlled and sustained released properties can be a suitable solution for improving its biopharmaceuticals properties. This work reports the preparation and characterization of auto-assembled chitosan/lecithin nanoparticles loaded with AST and AST complexed with β-cyclodextrin (β-CD) to boost its antimalarial activity. The nanoparticles prepared by direct injection of lecithin alcoholic solution into chitosan/water solution have shown the particle size distribution below 300?nm. Drug entrapment efficiency was found to be maximum (90%) for nanoparticles containing 100?mg of AST. Transmission electron microscopy images show spherical shape with contrasted corona (chitosan) surrounded by a lipidic core (lecithin + isopropyl myristate). Differential scanning calorimeter thermograms demonstrated the presence of drug in drug-loaded nanoparticles along with the disappearance of decomposition exotherm suggesting the increased physical stability of drug in prepared formulations. Negligible changes in the characteristic peaks of drug in Fourier-transform infrared spectra indicated the absence of any interaction among the various components entrapped in the nanoparticle formulation. In vitro drug release behavior was found to be influenced by pH value. Increased in vivo antimalarial activity in terms of less mean percent parasitemia was observed in infected Plasmodium berghei mice after the oral administration of all the prepared nanoparticle formulations.     

Preparation of emulsifying wax/glyceryl monooleate nanoparticles and evaluation as a delivery system for repurposing simvastatin in bone regeneration

Simvastatin (Sim) is a widely known drug in the treatment of hyperlipidemia, which has attracted so much attention in bone regeneration due to its potential osteoanabolic effect. However, repurposing of Sim in bone regeneration will require suitable delivery systems that can negate undesirable off-target/side effects. In this study, we have investigated a new lipid nanoparticle (NP) platform that was fabricated using a binary blend of emulsifying wax (Ewax) and glyceryl monooleate (GMO). Using the binary matrix materials, NPs loaded with Sim (0–500?µg/mL) were prepared and showed an average particle size of about 150?nm. NP size stability was dependent on Sim concentration loaded in NPs. The suitability of NPs prepared with the binary matrix materials in Sim delivery for potential application in bone regeneration was supported by biocompatibility in pre-osteoclastic and pre-osteoblastic cells. Additional data demonstrated that biofunctional Sim was released from NPs that facilitated differentiation of osteoblasts (cells that form bones) while inhibiting differentiation of osteoclasts (cells that resorb bones). The overall work demonstrated the preparation of NPs from Ewax/GMO blends and characterization to ascertain potential suitability in Sim delivery for bone regeneration. Additional studies on osteoblast and osteoclast functions are warranted to fully evaluate the efficacy of Sim-loaded Ewax/GMO NPs using in-vitro and in-vivo approaches.     

A fibrin gel loaded with chitosan nanoparticles for local delivery of rhEGF: preparation and in vitro release studies

Recombinant human epidermal growth factor (rhEGF) is known to stimulate cell proliferation and accelerate wound healing. Direct delivery of rhEGF at the wound site in a sustained and controllable way without loss of bioactivity would enhance its biological effects. The aim of this study was to prepare a novel local delivery system for the sustained and controllable release of rhEGF, a fibrin gel loaded with chitosan nanoparticles. First, rhEGF-loaded chitosan nanoparticles were prepared and characterized, and these showed an ability to protect rhEGF from proteolysis. The prepared nanoparticles were then incorporated into a fibrin gel matrix during polymerization. In vitro release studies showed that the fibrin gel loaded with rhEGF/chitosan nanoparticles could achieve a more sustained release of rhEGF than either chitosan nanoparticles or an unloaded fibrin gel. Additionally, the release rate could be controlled by altering the contents of fibrinogen and thrombin in this composite delivery system. The bioactivity of the released rhEGF was determined by assessing its ability to stimulate the proliferation of BALB/c 3T3 cells, and the results showed that rhEGF bioactivity was not affected during the preparation process and could be maintained for at least 7 days. This novel delivery system may have great potential applications in the local administration of rhEGF.     

Preparation and Evaluation of Methotrexate-Loaded Biodegradable Polyanhydride Microspheres

Methotrexate-loaded biodegradable polyanhydride microspheres were prepared by modified hot-melt technique and aqueous solvent evaporation technique. The effect of particle size, drug loading and microencapsulation technique on the in vitro drug release was studied. The in vitro release of methotrexate was evaluated using an automated flow-through cell system. The release profile consisted of burst release and sustained release phases. The burst release from the microspheres prepared by the modified technique was lower than that from the aqueous solvent evaporation technique. In addition, the microspheres with lower loadings released smaller amounts during the burst release phase. For a given loading and processing technique, the amount released by burst decreased with an increase in particle size. The microspheres prepared by the modified hot-melt technique with 10% loading and 177-250 μm size fraction gave desirable prolonged release. This formulation was tested in vivo in rats by subcutaneous implantation. The peak serum level of methotrexate was reached between 15-18 hours compared to that between 0-3 hours observed following the administration of an equivalent dose of methotrexate solution. No microspheres were found at the site of implantation at 48 hours post-implantation.     

Simvastatin-loaded lyophilized wafers as a potential dressing for chronic wounds

Wafers are an established drug delivery system for application to suppurating wounds. They can absorb wound exudates and are converted into a gel, offering a moist environment that is vital for wound healing. Simvastatin-loaded lyophilized wafers were developed using sodium carboxymethyl cellulose (CMC) and methyl cellulose (MC) and evaluated for their potential in the management of chronic wounds. Simvastatin (SIM) was chosen as the model drug since it is known to accelerate wound healing by promoting angiogenesis and lymphangiogenesis. Pre-formulation studies were carried out with CMC, MC, and a mixture of CMC and MC. Wafers obtained from aqueous gels of 3% CMC and blend of CMC-MC in the % weight ratio of 2:1 and 1.5:1.5 were selected for further analysis. The formulated wafers were characterized by microscopic examination, texture analysis, hydration test, rheological studies, FTIR spectroscopy, water vapor transmission and drug release test. Among the selected formulations, simvastatin-loaded CMC-MC (2:1) wafers exhibited the most desired characteristics for wound dressing application, such as good flexibility, hardness, sponginess, and viscosity. It showed a sustained drug release, which is desirable in wound healing, and was more appropriate for suppurating wounds. In conclusion, simvastatin-loaded CMC-MC (2:1) wafers showing potential for wound dressing applications were successfully developed.     

Preparation,in Vitro and in Vivo Evaluation of Liposomal/Niosomal Gel Delivery Systems for Clotrimazole

Clotrimazole, which is an imidazole derivative antifungal agent, was widely used for the treatment of mycotic infections of the genitourinary tract. To develop alternative formulation for the vaginal administration of clotrimazole to provide sustained and controlled release of appropriate drug for local vaginal therapy, liposomes/niosomes were evaluated as delivery vehicles. To optimize the preparation of liposomes/niosomes with regard to size and entrapment efficiency, multilamellar liposomes/niosomes containing drug were prepared by lipid hydration method. The prepared liposomes/niosomes were incorporated into 2% carbopol gel, and the systems were evaluated for drug stability in phosphate-buffered saline (pH 7.4) and simulated vaginal fluid at 37 ± 1°C. Further, the vesicle gel system was evaluated by antifungal activity and tolerability on tissue level in rat.     

Preparation, in vitro and in vivo evaluation of liposomal/niosomal gel delivery systems for clotrimazole

Clotrimazole, which is an imidazole derivative antifungal agent, was widely used for the treatment of mycotic infections of the genitourinary tract. To develop alternative formulation for the vaginal administration of clotrimazole to provide sustained and controlled release of appropriate drug for local vaginal therapy, liposomes/niosomes were evaluated as delivery vehicles. To optimize the preparation of liposomes/niosomes with regard to size and entrapment efficiency, multilamellar liposomes/niosomes containing drug were prepared by lipid hydration method. The prepared liposomes/niosomes were incorporated into 2% carbopol gel, and the systems were evaluated for drug stability in phosphate-buffered saline (pH 7.4) and simulated vaginal fluid at 37 +/- 1 degrees C. Further, the vesicle gel system was evaluated by antifungal activity and tolerability on tissue level in rat.     

Delivery of vinblastine-containing niosomes results in potent in vitro/in vivo cytotoxicity on tumor cells

Vinblastine (VB), as a chemotherapeutic agent, is widely used in treatment of different types of cancer. However, its clinical application is limited due to its low water solubility, side effects, and multidrug resistance. The aim of this study was to increase the therapeutic efficacy of VB using drug delivery systems. For this purpose, a PEGylated niosomal formulation of vinblastine (Pn-VB) was prepared by thin film hydration method and physicochemically characterized. Drug release pattern was performed by dialysis diffusion method. The cytotoxicity of Pn-VB was investigated against murine lung cancer TC-1 cells using MTT assay and its tumor inhibitory effect was evaluated in lung tumor-bearing C57BL/6 mice. Mean particle size, zeta potential, entrapment, and loading efficiency of niosomes were obtained to be about 234.3?±?11.4?nm, -34.6?±?4.2?mV, 99.92?±?1.6%, and 2.673?±?0.30%, respectively. While, the mean particle size and zeta potential for non-PEGylated niosomes were obtained about 212.4?nm and -31.4?mV, respectively. The in vitro release pattern of drug from niosomes showed a sustained release behavior. Pn-VB indicated a significant increase in toxicity against TC-l cells as compared to free VB. In animal model, Pn-VB exhibited stronger tumor inhibitory effect and longer life time in comparison to free VB. In conclusion, Pn-VB showed appropriate stability, high-entrapment efficacy, lower releasing rate, and stronger cytotoxic activity against lung cancer TC-1 cells as compared to free drug. Thus, the Pn-VB could be a promising formulation for delivery of vinblastine to tumor cells with enhanced drug bioavailability and therapeutic efficacy.     

Design,optimization and evaluation of poly-ɛ-caprolactone (PCL) based polymeric nanoparticles for oral delivery of lopinavir

Lopinavir (LPV)-loaded poly-ε-caprolactone (PCL) nanoparticles (NPs) were prepared by emulsion solvent evaporation technique. Effects of various critical factors in preparation of loaded NPs were investigated. Box–Behnken design (BBD) was employed to optimize particle size and entrapment efficiency (EE) of loaded NPs. Optimized LPV NPs exhibited nanometeric size (195.3?nm) with high EE (93.9%). In vitro drug release study showed bi-phasic sustained release behavior of LPV from NPs. Pharmacokinetic study results in male Wistar rats indicated an increase in oral bioavailability of LPV by 4-folds after incorporation into PCL NPs. From tissue distribution studies, significant accumulation of loaded NPs in tissues like liver and spleen indicated possible involvement of lymphatic route in absorption of NPs. Mechanistic studies using rat everted gut sac model revealed endocytosis as a principal mechanism of NPs uptake. In vitro rat microsomal metabolism studies demonstrated noticeable advantage of LPV NPs by affording metabolic protection to LPV. These studies indicate usefulness of PCL NPs in enhancing oral bioavailability and improving pharmacokinetic profile of LPV.     

Successful factorial design for the optimization of methylprednisolone encapsulation in biodegradable nanoparticles

Abstract

Due to their crystalline nature, the encapsulation of hydrophobic corticosteroids within polymeric nanoparticles by o/w solvent evaporation method is often difficult to achieve. The aim of this study was to evaluate the effect of both process and formulation parameters on the encapsulation of a model corticosteroid: methylprednisolone (MP). For this purpose, a 3²factorial design was performed evaluating the effects of the concentration of emulsifiers and sonication time on the manufactured nanoparticles, followed by a multiresponse optimization. The study also included the evaluation of other parameters such as the type of organic solvent used, polymer characteristics and the initial mass of drug. The optimal nanoparticle formulation using 0.25% (w/v) of emulsifying agent (Polyvinyl-alcohol, PVA) and 5 min of sonication was then characterized. The highest encapsulation was obtained with an organic phase consisting of acetone: dichloromethane (1:1), polyD,L-lactide-co-glycolide (PLGA) 50:50 as polymer and an initial mass of 6.6 mg of methylprednisolone. Nanoparticles size and ζ potential of optimized formulation were respectively around 230 nm and ?14 mV. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) demonstrated that the drug was molecularly dispersed within the nanoparticles. Release study showed that MP-loaded nanoparticles sustained drug release for up to 120 h. This study reflects the importance of factorial design to optimize the manufacture of nanoparticles encapsulating hydrophobic drugs.     

Preparation, in Vitro and in Vivo Evaluation of Liposomal/Niosomal Gel Delivery Systems for Clotrimazole

Clotrimazole, which is an imidazole derivative antifungal agent, was widely used for the treatment of mycotic infections of the genitourinary tract. To develop alternative formulation for the vaginal administration of clotrimazole to provide sustained and controlled release of appropriate drug for local vaginal therapy, liposomes/niosomes were evaluated as delivery vehicles. To optimize the preparation of liposomes/niosomes with regard to size and entrapment efficiency, multilamellar liposomes/niosomes containing drug were prepared by lipid hydration method. The prepared liposomes/niosomes were incorporated into 2% carbopol gel, and the systems were evaluated for drug stability in phosphate-buffered saline (pH 7.4) and simulated vaginal fluid at 37 ± 1°C. Further, the vesicle gel system was evaluated by antifungal activity and tolerability on tissue level in rat.     

Sustained release of piroxicam from solid lipid nanoparticle as an effective anti-inflammatory therapeutics in vivo

Abstract

This study aims to investigate the solid lipid nanoparticle (SLN) as a novel vehicle for the sustained release and transdermal delivery of piroxicam, as well as to determine the anti-inflammation effect of piroxicam-loaded SLN. SLN formulation was optimized and the particle size, polydispersity index, zeta potential (ZP), encapsulation efficiency, drug release, and morphological properties were characterized. The transdermal efficiency and mechanism of the piroxicam-loaded SLNs were investigated in vitro. With the inflammation induced edema model in rat, the anti-inflammatory efficiency of piroxicam-enriched SLNs (Pir-SLNs) was evaluated. The SLN formulation was optimized as: lecithin 100?mg, glycerin monostearate 200?mg, and Tween (1%, w/w). The particle size is around 102?±?5.2?nm with a PDI of 0.262. The ZP is 30.21?±?2.05?mV. The prepared SLNs showed high entrapment efficiency of 87.5% for piroxicam. There is no interaction between piroxicam and the vehicle components. The presence of polymorphic form of lipid with higher drug content in the optimized Pir-SLNs enables the Pir-SLNs to release the drug with a sustained manner. Pir-SLNs with oleic acid as enhancer can radically diffuse into both the stratum corneum and dermal layer, as well as penetrate through the hair follicles and sebaceous glands with significantly higher density than the other control groups. Pir-SLNs promptly inhibited the inflammation since the 3rd hour after the treatment by decreasing the PGE₂ level. SLN was demonstrated to be a promising carrier for encapsulation and sustained release of piroxicam. Pir-SLN is a novel topical preparation with great potential for anti-inflammation application.     

Synthesis,in vitro characterization,and anti-tumor effects of novel polystyrene-poly(amide-ether-ester-imide) co-polymeric micelles for delivery of docetaxel in breast cancer in Balb/C mice

Objective: The goal of the present work was to make novel co-polymeric micellar carriers for the delivery of docetaxel (DTX).

Significance: Co-polymeric micelles can not only solubilize DTX and eliminate the need for toxic surfactants to dissolve it, but also cause passive targeting of the drug to the tumor and reduce its toxic side effects.

Methods: Poly(styrene-maleic acid) (SMA) was conjugated to poly (amide-ether-ester-imide)-poly ethylene glycol (PAEEI-PEG). Copolymer synthesis was proven by Fourier transform infrared (FTIR) and ¹H-nuclear magnetic resonance (¹H-NMR). The SMA-PAEEI-PEG micelles loaded with DTX were prepared and their critical micelle concentration (CMC), zeta potential, particle size, entrapment efficiency, and their release efficiency were studied. MCF-7 and MDA-MB231 breast cancer cells were used to evaluate the cellular uptake and cytotoxicity of the micelles. The antitumor activity of the DTX-loaded nanomicelles was measured in Balb/c mice.

Results: The FTIR and HNMR spectroscopy confirmed successful conjugation of SMA and PAEEI-PEG. The drug loading efficiency was in the range of 34.01–72.75% and drug release lasted for 120?h. The CMC value of the micelles was affected by the SMA/PAEEI-PEG ratio and was in the range of 29.85–14.28?µg/ml. The DTX-loaded micelles showed five times more cytotoxicity than the free drug. The DTX loaded micelles were more effective in tumor growth suppression in vivo and the animals showed an enhanced rate of survival.

Conclusion: The results show that the SMA-PAEEI-PEG micelles of DTX could potentially provide a suitable parenteral formulation with more stability, higher cytotoxicity, and improved antitumor activity.