共查询到20条相似文献,搜索用时 69 毫秒
1.
2.
3.
以钛酸丁酯和乙酸钡为原料用溶胶-凝胶法制备了BaTiO3纳米粉体,并烧结了不同晶粒尺寸的陶瓷,研究了不同烧结温度下BaTiO3陶瓷的微观结构及尺寸效应对电学性能的影响。结果表明:溶胶-凝胶法可以在较低的温度(700℃)下合成BaTiO3纳米粉体,平均粒径25nm;BaTiO3陶瓷的晶粒尺寸直接影响其电学性能,随晶粒尺寸的增大,剩余极化,压电常数,机电耦合系数,机械品质因数逐渐提高,居里温度向高温区偏移;当晶粒尺寸达到50μm时,陶瓷相对密度为95.6%,d33可达168pC.N-1,kp=24.8%,Qm=425,Tc=122℃。 相似文献
4.
采用溶胶-凝胶和自蔓延燃烧技术,制备了平均晶粒尺寸约20nm的Ba0.5Sr0.5TiO3(BST)纳米粉体.将纳米粉体压制成形后进行烧结,得到BST陶瓷.采用XRD、SEM、TEM和LCR数字电桥研究了BST的结构、形貌和介电性质.结果表明,干凝胶自蔓延燃烧后,可直接形成分散性好、颗粒尺寸均匀、具有钙钛矿结构的BST纳米粉体.BST陶瓷压片经1250℃烧结2h后获得了致密的结构和相对较大的介电常数.粉体的结晶温度和烧结体的烧结温度均低于传统工艺.很明显,溶胶-凝胶自蔓延燃烧法在纳米材料的制备方面具有明显的技术优势. 相似文献
5.
Ba0.65Sr0.35TiO3陶瓷材料的制备及介电特性研究 总被引:3,自引:0,他引:3
采用溶胶-凝胶工艺制备了Ba0.65Sr0.35TiO3粉体,并利用微波烧结技术对粉体进行了合成和烧结,研究分析了样品的介电特性,并与传统制备工艺获得的样品进行了性能比较。实验结果表明,获得的Ba0.65Sr0.35TiO3粉体颗粒较细,其合成温度和烧结成瓷温度都较传统工艺有大幅度降低,分别为900和1310℃;可以获得晶粒尺寸在1μm以内的陶瓷;随晶粒的减小,材料的相对介电常数变化不大,而介电损耗大大降低。 相似文献
6.
采用溶胶-凝胶(sol-gel)技术制备氧化镍粉体,考察烧结条件对NiO粉体的组成、结构和形貌的影响。研究结果表明,以醋酸镍、柠檬酸和水为原料在一定温度下合成了稳定的溶胶和凝胶,凝胶在400℃左右基本分解完全,逐渐形成NiO纳米晶,随着烧结温度的升高,纳米NiO晶粒尺寸逐渐增大,晶型趋于完整且晶粒大小分布均匀。600℃烧结2h获得NiO粉体的颗粒尺寸52nm,晶型较好且无杂相存在,有望成为高性能锂离子电池的阳极材料。 相似文献
7.
8.
9.
以钛酸四丁酯、五水硝酸铋和无水乙酸钠为原料,用溶胶-凝胶法制备Bi0.5Na0.5TiO3(BNT)细粉,通过XRD和TEM表征粉体的结构和形貌。采用正交试验法,分析了反应温度、溶液pH值、加水量对最终BNT粉体粒径的影响。结果表明,各因素对粉体晶粒尺寸影响的显著性水平由大到小依次为加水量溶液pH值反应温度;反应温度为60℃、溶液pH值为4.5、加水量为7.2mL的条件下制得粉体的平均晶粒尺寸约为200~350nm。 相似文献
10.
11.
A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils. 相似文献
12.
The end of over unit products of more than Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits beer wine yellow wine fruit syrup wine others cover over % of the national top-branded liquor products.…… 《中国标准化(英文版)》2008,25(1):30
The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.…… 相似文献
13.
Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster. 相似文献
14.
N.A. Odintsova N.V. Ageenko K.V. Kiselev N.M. Sanina E.Y. Kostetsky 《International Journal of Refrigeration》2006,29(3):387
We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes. 相似文献
15.
David R. Smith F. R. Fickett 《Journal of research of the National Institute of Standards and Technology》1995,100(2):119-171
Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability. 相似文献
16.
Fco. Javier Franco Pérez Marc Gener Moret 《Materials and Manufacturing Processes》2017,32(7-8):876-884
ABSTRACTThe production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials. 相似文献
17.
As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion. 相似文献
18.
Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting. 相似文献
19.
TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure. 相似文献
20.
R. Owsiński S. Kamiński M. Szymaniec A. Niesłony T. Łagoda 《Materialwissenschaft und Werkstofftechnik》2015,46(10):1059-1067
The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase. 相似文献