首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 109 毫秒
1.
Effects of the surface functional groups of multi-walled carbon nanotubes (MWCNTs) as catalyst support for the durability of polymer electrolyte membrane fuel cells (PEMFCs) were examined at high Pt loading conditions. The amount of oxygen functional groups on the MWCNTs surface was increased as the acid treatment time and temperature increased. We found that more functional groups in MWCNTs improved initial Pt dispersion but deteriorated durability due to the reduced carbon corrosion resistance. The experimental results also showed that despite the surface oxidation, Pt/MWCNT catalysts showed highly improved durability than Pt/C catalysts due to the graphitic nature of MWCNTs. Membrane electrode assembly (MEA) fabricated by 4 h acid treated MWCNTs at 25 °C showed 4 times better durability than commercial Pt/C based MEA at the reverse potential operation generated by fuel starvation conditions. We believe that MWCNTs can be effectively used for PEMFCs even at high loading due to their excellent anti-corrosion properties.  相似文献   

2.
Dimethyl phthalate esters (DMPEs) have been identified as endocrine disrupting plastisizers and emerging contaminants which can be released readily upon exposure to the environment. In this study, MWCNTs/TiO2 nanocomposites, which possess the potential application for the photocatalytic degradation of DMPEs under UV irradiation, were prepared via simple one-pot sol-gel reaction using titanium isopropoxide (TTIP) as titania precursor and multiwalled carbon nanotubes (MWCNTs). The MWCNTs/TiO2 nanocomposites was calcined in air for 2 h at the temperatures ranging from 350 to 750 °C. As a result, the MWCNTs/TiO2 nanocomposites synthesized at calcination temperature of 450 °C demonstrated the highest photodegradation efficiency of 97% after 180 min UV irradiation and its degraded products were evaluated using the ultra high performance liquid chromatography (UHPLC) coupled with a high resolution (HR) Orbitrap mass spectrometry (MS). A primary degradation mechanism was proposed and it was noteworthy that some new intermediates were discovered and reported. This work has developed a simple method for qualitative determination of DMPEs based on HPLC with UV detection.  相似文献   

3.
The hybrids of multi-walled carbon nanotube and poly(lactic acid) (MWCNT/PLA) were prepared by a melt-blending method. In order to enhance the compatibility between the PLA and MWCNTs, the surface of the MWCNTs was covalently modified by Jeffamine® polyetheramines by functionalizing MWCNTs with carboxylic groups. Different molecular weights and hydrophilicity of the polyethermaines were grafted onto MWCNTs with the assistance of a dehydrating agent. The results showed that low-molecular-weight Jeffamine® polyetheramine modified MWCNTs can effectively improve the thermal properties of PLA composites. On the other hand, high-molecular-weight and poly(oxyethylene)-segmented polyetheramine could render the modified MWCNTs of well dispersion in PLA, and consequently affecting the improvements of mechanical properties and conductivity of composite materials. With the addition of 3.0 wt% MWCNTs, the increment of E′ of the composite at 40 °C was 79%. For conductivity, the surface resistivity decreased from 1.27 × 1012 Ω/sq for neat PLA to 8.30 × 10−3 Ω/sq for the composites.  相似文献   

4.
In the present work, in situ polymerizations of sulfonated polyoxadiazole through a polycondensation reaction of A–A (hydrazine sulphate) and B–B (aromatic dicarboxylic acid) monomers with carbon nanotubes in poly(phosphoric acid) were performed. The structures of composites were characterized by elemental analysis, Raman and FTIR spectroscopy. The sulfonated polyoxadiazole composites with high molecular weight (in the order of magnitude of 105 g/mol) are soluble in organic solvents and can be cast as dense films. They exhibit good mechanical properties (storage modulus up to around 4 GPa at 300 °C) and an electrical conductivity in the order of 10−5 S m−1. The composites can be used at temperatures as high as 470 °C.  相似文献   

5.
Pt nanoparticles well dispersed on multiwalled carbon nanotubes (MWCNTs) were prepared for high-performance electrocatalytic oxidation of methanol in both acidic and alkaline media via the co-electrodeposition/stripping (CS) protocol, namely, co-electrodeposition of Pt and Cu followed by electrochemical stripping of Cu, as examined by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The Pt catalyst prepared by the CS protocol on MWCNTs (Ptcs/MWCNTs/Au) exhibited a specific electrocatalytic activity of 519 and 2210 A g−1 toward cyclic voltammetric electrooxidation (50 mV s−1) of methanol in 0.5 M CH3OH + 0.5 M H2SO4 and 0.5 M CH3OH + 1.0 M NaOH media, respectively, which are larger than those prepared by conventional electrodeposition from chloroplatinic acid on Au and MWCNTs/Au, as well as that by a CS protocol on Au. The Ptcs/MWCNTs/Au electrode also possessed the highest stability, which maintained 91% and 90% of its initial catalytic activity after 120-cycle CV in 0.5 M CH3OH + 0.5 M H2SO4 and 0.5 M CH3OH + 1.0 M NaOH, respectively. The electrode kinetics of methanol oxidation is also briefly discussed. The nanosubstrate-based CS protocol is simple, convenient and efficient, which is expected to find wide applications in film electrochemistry and electrocatalysis.  相似文献   

6.
The effects of the metal loading (30–70 wt.%), metal molar ratio (Co/Fe, 1–5) and mass ratio of citric acid to the catalyst (0–0.6) on the productivity and mean diameter of the multi-walled carbon nanotubes (MWCNTs) in a gas–solid fluidized bed reactor (with an inner diameter of 0.056 m and a height of 1.0 m) were determined. Liquefied petroleum gas (LPG) was used as the carbon source. X-ray diffraction (XRD) was used to characterize the catalysts synthesized using a combustion method. MWCNTs synthesized in the fluidized bed reactor were characterized by field emission scanning electron microscopy (FE-SEM) to observe their morphologies and measure their diameters. Productivity was increased by increasing both the metal loading and the mass ratio of citric acid to the catalyst. A high productivity, up to 2000%, was obtained. The catalyst transition metal particle grain size decreased in the range of 8–17 nm with an increasing citric acid mass ratio to the catalyst and the mean diameter of the MWCNTs decreased with increasing the metal molar ratio, however the correlation between the grain size in the catalyst and the mean diameter of MWCNTs remains unclear.  相似文献   

7.

Incorporation of rigid nanoparticles is the most effective means of improving polymer properties. Montmorillonite (MMT) and multi-walled carbon nanotubes (MWCNTs) are legendary in this field for their individual exceptional properties. A synergistic phenomenon is induced between these two particles when they are simultaneously incorporated into polymers. At a definite nanofillers concentration, called the percolation threshold, there is a sudden change in nanocomposite properties due to the formation of a 3D-structured network of the nanoparticles within the matrix. In this work, the properties of poly(lactic acid) (PLA) nanocomposites filled with different fractions of MMT/MWCNTs hybrid (0.5–2.0 wt%) were analyzed. In particular, the percolation threshold of the MMT/MWCNTs hybrid was uniquely identified by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical thermal analysis. The structural studies by X-ray diffraction and Fourier-transform infrared spectroscopy were also associated with the percolation threshold of MMT/MWCNTs in PLA. At 1.0 wt% MMT/MWCNTs concentration, the complete exfoliation of the particles was maintained, and the thermal characteristics such as glass transition, crystallization and melting temperatures reached their plateau at this hybrid concentration. Moreover, the thermal degradation and viscoelastic parameters showed their peak values at this critical point, which is correlated with the formation of the percolation threshold within the matrix. The morphological studies confirmed the homogeneous dispersion of MMT/MWCNTs in PLA up to a concentration of 1.0 wt%. At 2.0 wt% MMT/MWCNTs, few aggregations occurred in the PLA-based composite, confirming that the percolation threshold was formed at a lower concentration of MMT/MWCNTs nanoparticles.

  相似文献   

8.
A layer-by-layer deposition technique combined with Multi-wall carbon nanotubes (MWCNTs) was employed for fabricating choline sensors. The terminals and side-walls were linked with oxygen-containing groups when MWCNTs were treated with concentrated acid mixtures. A film of MWCNTs was initially prepared on the platinum electrode surface. Based on the electrostatic interaction between positively charged polyallylamine (PAA) and negatively charged MWCNTs and poly(vinyl sulfate) (PVS), a polymer film of (PVS/PAA)3 was alternately adsorbed on the modified electrode continuously to be used as a permselective layer. Then poly(diallyldimethylammonium) (PDDA) and choline oxidase(ChOx) multilayer films were assembled layer-by-layer on the pretreated electrode, so an amplified biosensor toward choline was constructed. The choline sensor showed a linear response range of 5 × 10? 7 to 1 × 10? 4 M with a detection limit of 2 × 10? 7 M estimated at a signal-to-noise ratio of 3, and a sensitivity of 12.53 μA/mM with a response time of 7.6 s in the presence of MWCNTs. Moreover, it exhibited excellent reproducibility, long-term stability as well as good suppression of interference. This protocol could be used to immobilize other enzymes for biosensor fabrication.  相似文献   

9.
Magnetically-sensitive polyurethane composites, which were crosslinked with multi-walled carbon nanotubes (MWCNTs) and were filled with Fe3O4 nanoparticles, were synthesized via in situ polymerization method. MWCNTs pretreated with nitric acid were used as crosslinking agents. Because of the crosslinking of MWCNTs with polyurethane prepolymer, the properties of the composites with a high content of Fe3O4 nanoparticles, especially the mechanical properties, were significantly improved. The composites showed excellent shape memory properties in both 45 °C hot water and an alternating magnetic field (f = 45 kHz, H = 29.7 kA m−1). The shape recovery time was less than one minute and the shape recovery rate was over 95% in the alternating magnetic field.  相似文献   

10.
A novel potentiometric urea biosensor has been fabricated with urease (Urs) immobilized multi-walled carbon nanotubes (MWCNTs) embedded in silica matrix deposited on the surface of indium tin oxide (ITO) coated glass plate. The enzyme Urs was covalently linked with the exposed free –COOH groups of functionalized MWCNTs (F-MWCNTs), which are subsequently incorporated within the silica matrix by sol–gel method. The Urs/MWCNTs/SiO2/ITO composite modified electrode was characterized by Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA) and UV–visible spectroscopy. The morphologies and electrochemical performance of the modified Urs/MWCNTs/SiO2/ITO electrode have been investigated by scanning electron microscopy (SEM) and potentiometric method, respectively. The synergistic effect of silica matrix, F-MWCNTs and biocompatibility of Urs/MWCNTs/SiO2 made the biosensor to have the excellent electro catalytic activity and high stability. The resulting biosensor exhibits a good response performance to urea detection with a wide linear range from 2.18 × 10? 5 to 1.07 × 10? 3 M urea. The biosensor shows a short response time of 10–25 s and a high sensitivity of 23 mV/decade/cm2.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号