共查询到19条相似文献,搜索用时 171 毫秒
1.
2.
针对以往沥青搅拌设备振动筛分效率计算未考虑细粒度与粗粒度物料混杂的情况,提出基于离散单元法的颗粒动力学分析获得不同粒度物料的占比,进一步结合格氏法与总效率公式建立沥青搅拌设备多层直线振动筛的筛分效率计算方法。首先建立多层直线振动筛以及物料颗粒的三维模型,基于离散单元法进行颗粒动力学分析,获得筛上物与筛下物中不同粒度颗粒的分布情况。然后建立筛分产品产率问题的优化函数,代入颗粒分布计算结果,通过线性规划方法计算产品产率以及各层物料中不同粒度颗粒的占比,最后根据总效率公式计算多层振动筛各层的筛分效率。现场试验验证了筛分效率计算方法的有效性。进一步研究振动参数的影响可以知道,当振动频率控制在18 Hz~20 Hz之间,振动方向角在70o~80o,筛面倾角位于11o~16o之间,振动筛筛分效率能够处于较合理控制范围。 相似文献
3.
针对目前振动筛筛分性能差及筛分理论不完善,亟待建立筛机参数与筛分效率间综合数学模型来指导振动筛的设计.基于离散单元法(Discrete Element Method,DEM)的筛分仿真实验解决筛分过程的复杂性和筛分数据难获得等问题,用可调参数的振动筛对仿真实验进行验证.筛分效率与筛分参数之间的数学关系是一个复杂的非线性问题,由于传统的回归算法对筛分数学模型预测精度低,利用能有效解决小样本问题和基于统计学理论的简单多核支持向量机(Simple Multiple Kernel Learning,SimpleMKL)对仿真实验获得的数据建立回归模型.但其模型是多极值且不可微分的多参数大规模计算问题,借用鲁棒性强和全局收敛性好的人工鱼群优化算法(Artificial Fish Swarm Algorithm,AFSA)对由SimpleMKL建立的筛分回归模型进行参数寻优,得出筛机振动和结构参数:振幅为2.5mm,振动频率为22Hz,振动方向角为50°,筛孔大小为0.9mm,筛丝直径为0.4mm,筛面倾角为21.6°.提高了振动筛的筛分效率,为振动筛的设计和制造提供了新思路. 相似文献
4.
基于弹性筛面潮湿细粒物料筛分理论 ,研究了梯流筛筛面动态特性 ,提出了梯流筛筛条设计公式 ,认为梯流筛能较好地完成难筛分物料的筛分任务 ,是其筛面弹性振动大 ,开孔率相对较高的本质所在 相似文献
5.
针对具有保鲜度要求的薄片类工件的排序上料作业,传统振动盘给料器无法满足其保鲜度要求,而人工操作或多自由度机械手虽然能满足其保鲜度要求,但速度较慢,无法满足工效要求.针对一种医用试条和干燥片的排序作业,基于筛分理论,采用具有倾斜底板的直线振动筛进行工件的自动排序,并针对薄片类工件易于产生的侧立堆叠现象,设计了一个带有喇叭口结构的盖板配合具有倾斜底板的筛盘共同进行工件的筛分排序.通过往复筛动工件,工件透筛率可达到99%,并且相对无盖板结构振动筛,在增加约7%的工件筛分次数的情况下可有效地消除工件侧立堆叠现象.综合考虑工件的排序和效率要求,具有盖板结构的振动筛在牺牲少量筛分排序次数的情况下,严格保证了工件的筛分效率和面触地水平叠放的排列要求,是一种可广泛适用于具有保鲜度要求的薄片类工件的自动排序振动筛. 相似文献
6.
7.
目前选矿厂常用惯性振动筛、直线振动筛、弧形筛、共振筛等对尾矿进行脱水筛分作业。惯性振动筛给矿量不稳定会影响筛分效率。所以,要求给矿均匀。直线振动筛构造复杂,制造精度要求高,振幅不易调整,振动器重量大。共振筛制造与安装的精度要求高,给矿要均匀、价格高。弧形筛筛上产品含水分高, 相似文献
8.
目的 在粮食储藏和加工过程中,平面回转筛是重要的粮食筛分清理设备。研究各项筛分处理参数对回转筛筛分性能的影响,并寻找回转筛的最优筛分参数。方法 基于离散元法(DEM)对回转筛在不同参数条件下的回转筛分过程进行数值模拟,以筛分流量、回转速度、回转半径和筛面倾角为4项变量依次进行单因素分析,得出各参数对筛分性能指标(筛分效率、除杂效率和物料流动速度)的影响规律,再以此选取各因素的较优水平范围进行多因素正交试验,并采用矩阵分析方法对试验结果进行权重排序。结果 得到了综合各项性能评价指标较优的参数组合:筛分流量为3.0 t/h,回转速度为465 r/min,回转半径为24 mm,筛面倾角为9°。结论 研究结果表明,寻求更优的筛分效率必然会降低除杂效率和物料流动速度,即物料在筛面上停留时间越长就越能增大其通过筛孔机会,同时杂质通过筛孔的概率也在增大。 相似文献
9.
10.
11.
《Advanced Powder Technology》2020,31(3):1196-1208
Elastic screen surfaces are widely used for classification of moist steam coal. In this study, a novel rigid-flexible coupled elastic screen surface was proposed, and its motion characteristics were investigated. Furthermore, the effect of excitation parameters on classification performance was analyzed. The results showed that the acceleration of the flexible elastic screen surface were markedly larger than those of the screen box due to the large deformation. The y-axis acceleration amplitudes of the elastic screen surface were about 150% higher than those of screen box, and showed a more pronounced increase during the feeding process, but decreased during the stable state compared to the no-load condition. With increasing total excitation force and frequency, the accelerations increased, the screening efficiency increased first and then decreased, while total misplaced materials changed in the opposite direction. The maximum screening efficiency of 83.15%, indicating the satisfactory classification performance for moist coal. 相似文献
12.
13.
《Advanced Powder Technology》2020,31(11):4445-4456
In this work, the screening process of an industrial-scale roller screen was simulated based on the validated discrete element method (DEM). The effects of the feed rate, rotational speed of rollers, inclination angle of screen deck and the cohesion force between wet particles on the screening process were investigated. The results show that screening efficiency decreases with the increase of feed rate, which remains above 0.80 when the feed rate is less than 700 kg/s. The optimal values of rotational speed and inclination for high efficiency are 100 r/min and 6°, respectively. Working parameters have a significant effect on both the passing percentage and the average velocity of different size fractions. Hence, reasonable working parameters should be adopted to avoid the accumulation of particles on the deck. Moreover, both particle shape and cohesion force have little effect on the screening processes of the roller screen. 相似文献
14.
15.
《Advanced Powder Technology》2022,33(8):103668
Flip-flow screening is an important method for classifying fine particles. As the lower limit of classification decreases during the screening process, the influence of particle-size characteristics becomes more significant. In this study, a laboratory prototype device of flip-flow screen (LPDFS) based on displacement excitation was built. Firstly, the screening probability model of flip-flow screening was established. The screening probability of particles was mainly determined by the average contact-mesh probability and screen-penetrating probability. On this basis, the screening experiment of LPDFS was explored under six different particle-size distributions. The function of the dominant particle-size fraction on screening effect was revealed. The influence mechanism of dispersion and average degree of each particle-size fraction on screening effect was explored. When the composition of the particle-size obeyed a normal distribution and with the increasing dispersion degree, the average particle-size fraction was at a distance from the near-screen particle-size, and the comprehensive separation index was higher. Further, high-speed photography was used to track the labeled particles. The throwing and loosening behavior of particle groups in the LPDFS was clarified. 相似文献
16.
采用传统采样分析法对电厂混煤混合均匀性进行评估存在较大困难。将掺混原煤看作是各种成分符合不同概率分布的混合物,在原煤掺混而成的混煤中,某种成分的概率分布由原煤该成分分布、混合比例以及颗粒混合状态共同决定。以挥发分作为示踪成分,考察了掺混过程中挥发分概率分布的变化,在给定原煤挥发分分布和混煤挥发分样本集的情况下,采用最大似然原理对混煤中各种原煤掺混比例和标准差进行估计,进而对混合状态进行评估。研究表明,掺混模型对实际掺混系统的预测结果与原煤消耗量的统计数据吻合良好;多工况仿真实验也表明,掺混系统混合质量越差,模型的预测精度越高。 相似文献
17.
18.
为了探索复杂环境下大规模深孔台阶爆破振动的传播规律,以内蒙古昊达煤矿尾流土石方工程的爆破振动测试结果为例,利用灰色关联分析方法选取质点振动速度作为爆破振动灰色关联分析的因变量,选取孔深、单孔装药量、最大一段药量、爆心距以及爆破方向作为自变量确定了各影响因素的顺序,并进行了现场减振实验研究。研究结果表明,影响爆破振动各因素中的重要程度为:最大一段药量单孔药量爆心距爆破方向孔深;采取逐孔起爆、孔内分段爆破技术严格控制单段最大起爆药量,利用开挖减振沟、预裂缝以及调整爆破起爆方向等措施达到综合减振的效果。 相似文献
19.
目的研究三自由度半正定系统在随机振动条件下的加速度动态响应以及加速度功率谱密度。方法以运输包装中常见的三自由度半正定系统为原型,建立了三自由度半正定系统的质量-弹簧-阻尼系统。依据美国ASTM-D4728随机振动标准,利用Matlab/Simulink仿真平台,建立仿真模型,并输入模型参数,得到了三自由度半正定系统随机振动下的动态响应。基于相同试验标准进行试验,对比分析试验结果与仿真结果的差异。结果在低频段内(小于80 Hz),Simulink仿真模拟随机振动的加速度功率谱密度值与随机振动试验的加速度功率谱密度值的相关性系数达到0.983,加速度功率谱密度值最大处仅相差8.8%。在高频段内(大于80 Hz),Simulink仿真模拟随机振动的加速度功率谱密度值与随机振动试验的加速度功率谱密度值的相关性系数只达到0.745,加速度功率谱密度值最大处相差13.1%。结论利用Matlab/Simulink仿真平台分析包装系统的低频随机振动是一种简单可行的方法,一定程度上可以作为随机振动试验的代替手段。 相似文献