首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
中性束注入装置是产生高能中性粒子以加热托卡马克等离子体的装置。NBI真空压力分布是影响中性束传输效率特别是再电离损失的关键因素之一。研究分析了超导托卡马克实验装置中NBI的工作原理和结构特点,建立了EAST NBI的几何与物理模型,利用Monte-Carlo方法建立NBI主真空室内分子运动及碰撞的数学模型,并运用Matlab软件编程实现对NBI主真空室内真空压力分布的模拟计算,得到主真空室内三段区域在进气过程中的气体分子三维分布图和平均压力变化曲线。研究可为EAST NBI主真空室内的中性化室、偏转系统、低温抽气系统的结构设计提供指导。  相似文献   

2.
真空系统在EAST全超导托卡马克装置中是非常重要的组成部分,它主要由内真空室抽气系统和外真空室抽气系统组成。内真空室抽气系统主要由主抽系统、偏滤器抽气系统、低杂波抽气系统组成,主要为等离子体的稳定运行提供清洁的超高真空环境;外真空室抽气系统主要由主抽系统、电流引线段抽气系统及低温阀箱抽气系统组成,主要为超导磁体的正常运行提供真空绝热条件。EAST真空抽气系统经过三轮物理实验的不断改造和完善,目前基本满足了等离子体物理实验的需要。  相似文献   

3.
锂蒸发镀膜壁处理技术为EAST核聚变装置内真空室提供了良好的壁条件,促进了高参数等离子体的获得——首次H-Mode、100s长脉冲和1MA高电流等离子体,发展为常规而又关键的壁处理方式.本文详细介绍了EAST锂化系统设计与研制,包括锂蒸发器设计,锂材定制,外围真空、控制系统组建.给出了锂化系统台面实验结果,运行条件、锂化运行三种方式,坩埚的蒸发速率对蒸发量的控制和判断坩埚是否需要装载的方法.  相似文献   

4.
为了产生并维持中性束生成与传输过程所要求的洁净真空压力分布环境,设计了全超导托卡马克核聚变实验装置"东方超环"(Experimental Advanced Superconducting Tokamak,简称EAST)的中性束注入器(Neutral Beam Injector,简称NBI)的低温真空系统。对低温真空系统的总体布局、低温冷凝屏的结构设计、冷却方式与冷量供应、运行温度的确定等关键问题进行了详细分析。通过性能测试,验证了所设计的低温真空系统能满足EAST的NBI(简称EAST-NBI)对洁净真空压力分布环境的要求。  相似文献   

5.
四极质谱计广泛用于托卡马克装置上,用来监测聚变装置的真空品质,为真空系统的状态提供判断依据。本文介绍了四极质谱计在全超导非圆截面托卡马克装置(EAST)上的多种应用,为聚变装置的第一壁处理和聚变过程中多种残余气体成分含量变化提供数据。实验证明四极质谱计是EAST装置真空系统运行、等离子体与器壁相互作用研究过程中一种较为基础的测量工具。  相似文献   

6.
EAST装置复杂的真空系统需要大量PKR251型真空规管实时测量,并获得准确的真空度数据,但是长时间运行后会出现测量结果不准的现象。PKR251型真空规管的修复和标定技术是通过对规管内部电极、极板等关键部件的去污(更换)、清洗和烘烤处理,修复计量不准或错误的真空规管。搭建规管标定平台模拟EAST装置的真空环境,通过控制充入真空室内高纯氮气的充气速率,改变真空室内的气体压力,比较单个规管与标准规的读数,判定规管测量准确度,实现规管标定。标定实验发现修复后的PKR251型规管在不同压力下线性度较好,满足EAST装置真空测量要求。  相似文献   

7.
在磁约束聚变实验装置托卡马克中,第一壁材料直接面对高温等离子体,承受高能粒子的轰击。随着聚变装置等离子体存在时间的延长及辅助加热功率的增加,第一壁材料腐蚀和沉积将会越来越严重。材料的腐蚀一方面会污染等离子体影响聚变等离子体的品质,另一方面将危害装置的安全运行。为了提高材料的物理和化学溅射阈值,超导托卡马克东方超环(EAST)装置上选用掺杂碳化硅涂层石墨作为第一壁材料。本实验通过离子束表面分析方法,研究了EAST装置中限制器石墨材料的腐蚀与沉积特性,结果显示在累计大约36000s的等离子体实验中,安装在限制器上的标记瓦块近1μm的碳涂层基本被腐蚀,其腐蚀速率超过0.0278 nm/s。  相似文献   

8.
在远紫外和真空紫外光谱区,我国已有的光谱辐射基准源一高温黑体没有足够高的辐射强度和足够灵敏的辐射响应度,不能作这个光谱区的辐射基准。短波辐射强、稳定而可重复的壁稳氮弧等离子体,可作为这个光谱区的副基准辐射源。一、建立(200-350)urn光谱辐亮度副基准实验装置本实验装置包括等离子体氛弧、氮弧的供水供气系统、氨弧电源、两个单色仪及其光学系统、波长驱动及其测量自动化系统,标准钨带灯和标准氛灯。等离子体壁稳氨弧由钨制的阴极、阳极和15片紫铜叠片组成,全部水冷。弧片间用厚度为27mm的聚脂塑料环隔开绝缘。氮弧的真…  相似文献   

9.
先进实验超导托卡马克(EAST)作为国际上具有类似国际热核聚变实验堆(ITER)等离子体位型的全超导托卡马克之一,最近发展和建成了一套挤压成冰气动加速高频弹丸注入系统(PI-50),主要在EAST上用于等离子体边界局域模控制和芯部加料。PI-50弹丸注入器含有两个弹丸注入模块,并且配备了完善的供气系统。整个弹丸注入器的主要设计参数:发射弹丸频率为1~50 Hz可调,弹丸的尺寸为Φ1.5 mm×1.8 mm、Φ1.5 mm×1.5 mm和Φ1.5 mm×1.2 mm,弹丸发射速度为150~250 m/s。最近该系统已经完成了台面测试,获得了初步的测试结果。目前,PI-50系统的辅助真空抽气系统、低温系统、弹丸传输管道以及该系统本身已经全部安装到EAST实验现场。相关的联机调试将会在2017年EAST下半年的物理实验中进行。  相似文献   

10.
为了在EAST装置上建立量化的真空与壁处理技术研究平台,我们构筑了以研华工控机、NI-6229数据采集卡为硬件基础,LabVIEW软件为编程环境的数据采集系统。该系统特色体现在充分利用LabVIEW图形化编程语言直观特性进行数据采集的同时,在程序内嵌入相关公式节点,利用文本语言简洁、灵活的特性对采集的数据进行处理。本系统通过提高真空信号与温度信号的采样速率和采样精度,使获得的数据很好地满足了EAST装置壁滞留研究和低温泵再生运行的要求,为EAST装置的稳态运行及物理实验研究提供了良好的平台。这一系统的可靠性和先进性已在最新一轮EAST实验中得到了验证。  相似文献   

11.
A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling.  相似文献   

12.
An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate agreement is demonstrated between the derived relations and experimental data.  相似文献   

13.
An analysis of anisotropy of the properties of a Bi2Se0.3Te2.7 solid solution was carried out using construction of demonstrative surfaces for thermoelectric effectiveness and thermal expansion coefficients. It is shown that the texture is an important factor forming anisotropy of properties and technological fitness of ingots for manufacturing modules. Anisotropy of properties based on the studies of the ingot textures obtained using the float-zone method and Bridgman method (growing thermoelectric plates in a flat cavity) was studied.  相似文献   

14.
A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue.  相似文献   

15.
16.
Australia has several uranium mines and a large number of mineral sand mines, with associated processing facilities. Exposures resulting from these mining and processing operations usually involve intakes of mixtures of radionuclides. This work describes the development of a suite of first order, linear compartment models, based on the ICRP Publication 66 respiratory tract model, and an analytical solution to the decay equations, for assessing the consequences of such intakes. The computer programs based on these models directly compute excretion, organ retention and organ and whole-body doses for intakes of either single radionuclides or any mixture of radionuclides belonging to the same radioactive decay chain. The intake can be via inhalation, ingestion or injection, and can be acute, chronic or of limited duration. The starting concentration and degree of secular (dis)equilibrium can be specified for each radionuclide. No assumptions need to be made about the relative magnitudes of the radioactive half-lives of the different nuclides.  相似文献   

17.
18.
19.
水三相点是开尔文热力学温度的唯一基准点,也是ITS-90国际温标重要的定义固定点。因此,水三相点不确定度分析对整个温标的建立、温度量值传递起着至关重要的作用。近3年来,中国计量科学研究院研制出一系列高质量的水三相点容器,加强了水三相点的研究,为不确定度的分析提供了更为可靠的实验依据。同时,不确定度的分析也是客观评价新研制容器性能的一个重要指标。因此,根据实验结果对新研制容器所复现的水三相点进行了不确定度评定。评定结果表明,其扩展不确定度为0.16mK(k=2.69,P=0.99)。  相似文献   

20.
可燃气体检测报警器测量结果的不确定度评定   总被引:1,自引:0,他引:1  
本文详细介绍了可燃气体检测报警器示值误差测量结果的不确定度评定方法。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号