共查询到20条相似文献,搜索用时 78 毫秒
1.
针对电火花成形加工工艺特点,以峰值电流、脉冲间隔、脉冲宽度、峰值电压为输入参数,加工速度、电极损耗和表面粗糙度为输出参数,提出了用BP神经网络对电火花成形加工过程建立加工效果预测模型,通过计算机仿真的结果与实验数据对比,认为该模型能够比较精确地预测出一定条件下的加工速度、电极损耗和表面粗糙度,并能真实反映出机床的加工工艺规律。 相似文献
2.
介绍了喷射电铸快速成形的基本原理,制备了纳米晶电极铜,分别研究了纳米晶铜电极和粗晶铜在不同电火花加工参数的工具电极损耗性能。运用扫描电子显微镜(SEM)和X-ray衍射等现代分析手段对工具电极的微观结构和成分进行分析。结果表明,喷射电铸能显著提高极限电流密度,细化晶粒,铜沉积层具有纳米晶微观结构。纳米铜电极损耗随着脉冲宽度增大而减小,随峰值电流的增大而增大,且纳米晶铜的电极损耗明显小于粗晶铜。 相似文献
3.
《中国新技术新产品》2016,(23)
航空发动机是复杂的工业产品,其对于数控加工要求较高。电火花数控机床是一种在航空发动零部件加工过程中使用较多的一种数控设备,其能够对一些复杂的型面工件进行加工。为提高电火花机床的加工质量需要对影响电火花机床加工质量的影响因素进行分析,本文在分析使用电火花机床加工电参数对工件质量的影响实验研究的基础上,通过对电火花机床加工过程中单一参数的改变来分析其对加工工件质量影响,总结分析了电火花机床各加工电参数(如极性、峰值电流、脉冲宽度、脉冲间隔等)对工件表面材料表面质量的影响。 相似文献
4.
对10Ni3MnCuAl钢磨削、电火花加工表面完整性进行了研究,测量出表面析出硬化层的显微硬度、三维形貌及表面粗糙度,并用X射线衍射法(XRD)分别测试了10Ni3MnCuAl钢析出硬化层的残余应力,得到磨削、电火花加工试样不同深度处残余应力的变化规律。实验结果表明,与电火花加工相比,使用磨削方式加工10Ni3MnCuAl钢可以得到较好的表面完整性,应力集中敏感性较低,而对复杂形状的零件进行加工时,电火花加工有磨削加工不可比拟的优势,为提高10Ni3MnCuAl钢加工表面完整性提供了依据。 相似文献
5.
采用高速电火花线切割机床在铜表面构筑复合粗糙结构,经自组装技术处理后得到了超疏水铜表面。结果表明,高速电火花线切割机床在铜表面构筑陨石坑-突起-鳞片-气孔-颗粒复合粗糙结构,该复合结构形成了"气垫"效应,实现了超疏水功能,表面静态接触角达153.73°,滚动角为2.33°。研究了脉冲宽度对表面疏水性能的影响,结果表明,脉冲宽度对铜表面复合粗糙结构的形貌和水滴在表面的接触状态都有十分重要的影响。随着脉冲宽度的增加,铜表面陨石坑直径随之增大,陨石坑深度减小,单位面积内的突起物数量随之减少。微观结构的变化导致水滴在铜表面的接触状态由Cassie模型向Wenzel模型转变。胶带剥离试验表明超疏水铜表面具有良好的耐用性,剥离后的试件具有良好的可修复性和时间稳定性。 相似文献
6.
通过化学气沉积过程中掺B,制备的金刚石膜电阻率下降10-19,导致金刚石膜整体导电,可采用电火花抛光。用扫描电镜和Raman分析了金刚石膜电加工表面的形貌和成分。金刚石膜的电火花抛光是多种效应综合作用的结果,即金刚石膜熔化、汽化、碳的氧化和蒸发、爆炸抛出、界面的化学反应以及金刚石的石墨化。通过实验研究了电加工参数对表面粗糙度和加工速度的影响,通过回归分析得到电火花抛光表面粗糙度和加工速度的经验公式,其相关系数的平方分别为0.91和0.99,表明拟合精度高。试验结果表明,放电电流和脉冲宽度对加工面的表面粗糙度和加工速度影响很大。放电电流为5 A、脉冲宽度为380μs时,抛光后表面粗糙度Ra<1μm。 相似文献
7.
为了进一步明确脉冲宽度对铝合金微弧氧化陶瓷层耐蚀性及能量消耗的综合影响,在恒峰值电流控制模式下,以不同脉冲宽度在6061铝合金表面制备了微孤氧化陶瓷膜,采用扫描电镜观察陶瓷膜形貌,采用厚度仪及粗糙度仪测试陶瓷膜厚度及粗糙度,采用极化曲线分析陶瓷膜的耐蚀性及微弧氧化的能量消耗;研究了脉冲宽度对陶瓷膜厚度、耐蚀性能及能量消耗的影响.结果表明:随脉冲宽度的增加,阴阳极间电压增速变快,陶瓷膜厚度增加,微孔数量减少,微孔孔径增大,陶瓷层表面粗糙度增大;随脉冲宽度的增加,陶瓷层的耐蚀性能先增强后减弱,在脉冲宽度为80μs时为最好;随脉冲宽度的增加,阴阳极间的能量消耗近似成倍增加,单位厚度陶瓷膜所消耗的能量增幅较小. 相似文献
8.
9.
研究磁场增强高功率脉冲磁控溅射技术的放电特性在不同工作参数下的演变规律。利用数字示波器采集Hi PIMS的基体离子电流用于表征其放电特性的变化。结果表明:靶放电电压不同时基体离子电流对工作气压的响应不同,较低靶电压时基体离子电流平均值随工作气压的增加逐渐增加;而较高靶电压时基体离子电流平均值随工作气压增加迅速增加后趋于稳定。基体离子电流随基体偏压的变化表现出两个特征,较低基体偏压时的基体离子电流在脉冲开始阶段呈现出较强的电子流波段,而基体偏压较高时则未出现电子流。不同脉冲频率及靶电压下的基体离子电流的波形形状大致相似,但当处于较高靶电压时存在一个明显特征,即当脉冲结束后离子流会出现一个尖锐峰值。随脉冲宽度的增加,基体离子电流负向电子流和正向离子流均逐渐增大。 相似文献
10.
11.
12.
13.
14.
15.
16.
从实测大生产物料的动态表面张力和静态表面张力数据,用表面活性剂在涂布液的扩散和在新表面吸附过程,分析涂布过程出现的余布弊病,并提出解决的办法。 相似文献
17.
Haoran Chen Hao Zhu Zhichao Huang Wenhui Rong Kai Wu 《Advanced materials (Deerfield Beach, Fla.)》2019,31(50)
A heterogeneous catalytic process involves many surface elementary steps that affect the overall catalytic performance in one way or another. In general, a high‐performance heterogeneous catalyst should meet the main criteria: excellent catalytic activity and high selectivity toward target products. Using surface science techniques, the two‐sidedness of the surface reaction mediations can be explored, from the perspectives of the surface and the molecule manipulations. The surface manipulation refers to a reaction that is mediated by composition and structure of the substrate as well as surface species, while the molecular manipulation relates to a reaction that is mediated by the reacting molecule via the precursor selection, environmental control, or external excitation. The best catalytic system should consist of the most efficient catalyst and the best suitable reacting molecule, in addition to its economic benefit and environmental amity. Recent research progress in surface reaction mediation is outlined, and its two‐sidedness is governed by the Arrhenius equation. This should shed new light on the connection between basic theory and surface reaction mediation strategies. To conclude, challenges and possible opportunities are elaborated for efficient surface reaction mediations. 相似文献
18.
19.
Heterogenous reactions under transport control can be modelled in terms of a film of reaction products covering the reaction surface. Such a surface defines a unique direction in space which may be used to classify transport processes as transverse or longitudinal. Since crossed-gradient transport occurs, a Péclet number Pe is introduced, representing the ratio of the velocities characterizing transverse and longitudinal transport, with transverse transport being by film diffusion of some reacting species and longitudinal transport corresponding to film flow as with wetting processes. If the influence of viscosity is taken into account in terms of a Schmidt number Sc, the long-wave approximation for the evolution of thin films on reaction surfaces is shown to be equivalent to a distinguished limit Pe 0, Sc , while keeping 1/
. The long-wave approximation is derived by an application of the method of strained variables which leads to a film equation for the spatio-temporal evolution of the film thickness h which represents the crucial element for a complete solution of the thermo-hydrodynamics of the layer. Since film generation due to chemical reaction and film removal due to evaporation may compensate for certain thicknesses h, surface phases are found to occur which correspond to stationary layers of uniform thickness. The evolution of the surface layer is shown to be a generalized reaction-diffusion process, with surface waves representing dynamical transitions between surface phases. 相似文献
20.
基于球面三角网格逼近的等距曲面逼近算法 总被引:2,自引:0,他引:2
给出了一种基于球面三角网格逼近的等距曲面逼近新算法。利用三角网格逼近基球面,然后计算此三角网格按中心沿在曲面扫凉而成空间区域的边界作为等距曲面的逼近。该算法计算简单,方便地解决了整体误差问题,而且所得到的逼近曲面是与原曲面同次数的NURBS曲面。 相似文献