Enhanced ductility and tensile properties of hybrid montmorillonite/cellulose nanowhiskers reinforced polylactic acid nanocomposites

Montmorillonite (MMT)/cellulose nanowhiskers (CNW) reinforced polylactic acid (PLA) hybrid nanocomposites were prepared by solution casting. CNW were isolated from microcrystalline cellulose using a chemical swelling method. An initial study showed that the optimum MMT content, for mechanical properties, in a PLA/MMT nanocomposite is five parts per hundred parts of polymer (phr). Various amounts of CNW were added to the optimum formulation of PLA/MMT to produce PLA/MMT/CNW hybrid nanocomposites. FT-IR analysis indicated the formation of some polar interactions, resulting in enhanced tensile properties of the hybrid nanocomposites. The highest tensile strength for the hybrid nanocomposites was obtained for a 1 phr CNW content. Young’s modulus was also found to increase with an increasing CNW content. Interestingly, the strain to failure (or ductility) of the hybrid nanocomposites increased significantly from ~10 to ~90 % with the addition of 1 phr CNW. This increase in ductility was proposed to be due to the nucleation of crazes and the formation of shear bands in the PLA.     

二维和零维纳米材料协同增强的高性能纳米复合材料

将二维蒙脱土和零维纳米TiO_2共同复合到环氧树脂中,成功地制备出一种高性能有机蒙脱土/纳米TiO_2/环氧树脂复合材料。力学性能测试和热分析显示,该复合材料在拉伸模量、拉伸强度、弯曲模量、弯曲强度、缺口冲击强度、玻璃化转变温度、热分解温度上都明显优于纯环氧树脂,也优于有机蒙脱土/环氧树脂复合材料和纳米TiO_2/环氧树脂复合材料。XRD检测和透射电子显微镜观察显示,在有机蒙脱土/纳米TiO_2/环氧树脂复合材料中,蒙脱土被完全剥离为纳米单片,和纳米TiO_2交错分布于环氧树脂中。选择适宜的两种维度的纳米材料复合于聚合物中,是制备新型高性能复合材料的成功思路。     

Experimental and theoretical analyses of mechanical properties of PP/PLA/clay nanocomposites

Compatibilized and non-compatibilized blends of polypropylene (PP) and poly(lactic acid) (PLA) with various compositions containing nanoclay particles were prepared by one step melt compounding in a twin screw extruder. Two nanocomposite systems with different matrices i.e. PP-rich (75/25 composition) containing Cloisite 15A and PLA-rich (25/75 composition) containing Cloisite 30B were selected for investigation of effect of nanoclays and n-butyl acrylate glycidyl methacrylate ethylene terpolymers (PTW) as compatibilizer on mechanical properties of PP/PLA/clay nanocomposites. Tensile and impact properties of the nanocomposite systems were investigated and correlated with their microstructures. Tensile modulus and strength of the blends were increased while elongation at break decreased by increasing PLA content. There was an irregular relationship between impact strength of the blends and PLA content. Several proposed models for blends and nanocomposites were used for prediction of tensile modulus of the samples. Most of the proposed models for blends could predict the tensile modulus of the blends successfully at low content of PLA. Another notable point was that most of the micromechanical models for nanocomposites fitted well to experimental values at low content of the clays and showed deviations at high clay loadings.     

Flammability and tensile properties of polylactide nanocomposites with short carbon fibers

Nanocomposites of polylactide (PLA) with aluminum hydroxide (ATH), short carbon fibers (CF), and montmorillonite (MMT) were prepared via direct melt blending. The exfoliated and intercalated clay structures with some aggregations in the PLA matrix were observed. The tensile strength and elongation at break of the PLA composite caused by the high content of the retardant ATH were improved by adding modified MMT and CF to replace a portion of ATH in the PLA matrix. The thermal degradation temperatures and char residue of the PLA/ATH/MMT/CF nanocomposites as determined by thermogravimetric analysis were higher than without MMT. Furthermore, a novel method was proposed to analyze the flammability of composite using an infrared camera, which could capture the apparent thermal image of the sample during UL 94 V test. It was found that, with addition of the MMT and short CF, a more effective insulation layer could be formed on the ablating surface of the PLA/ATH composite, and the high thermal conductivity of the CF might increase the release rate of heat from the surface composite during burn, thus the PLA/ATH/MMT nanocomposite containing short carbon fibers having a V-0 rating without flaming dripping could be obtained.     

Continuous fibre composites with a nanocomposite matrix: Improvement of flexural and compressive strength at elevated temperatures

Polymer layered silicate nanocomposites can improve the flexural and compressive strength of continuous fibre reinforced composites by means of increasing the matrix modulus. A three-phase thermoplastic composite consisting of a main reinforcing phase of woven glass fibres and a polyamide 6 (PA6) nanocomposite matrix was fabricated. Flexural testing of a conventional PA6 fibre composite has shown a decrease of the flexural strength upon increasing temperature. This behaviour is associated with the decrease of the matrix modulus, especially above T_g. The nanocomposite used in this study has a modulus that is much higher than unfilled PA6, even above T_g and after moisture conditioning. The results showed that the fibre composites with a nanocomposite matrix have a more than 40% increased flexural and compressive strength at elevated temperatures. This also means that the temperature at which the materials can be used is increased by 40–50 °C. Therefore, by using a nanocomposite matrix the high temperature performance of fibre composites can be improved without any change in processing conditions. The combination with other advantages of nanocomposites in areas such as barrier properties, flammability and creep makes this a very attractive approach.     

Effects of grafted chain length on mechanical and electrical properties of nanocomposites containing polylactide-grafted carbon nanotubes

We herein report the effects of interfacial reinforcement on mechanical and electrical properties of nanocomposites based on polylactide (PLA) and multi-walled carbon nanotube (MWCNT). For this purpose, a series of MWCNTs grafted with PLA chains of various lengths (MWCNT-g-PLAs) were prepared by ring-opening polymerization of l-lactide with carboxylic acid-functionalized MWCNT (MWCNT-COOH). MWCNT-g-PLAs were then mixed with commercial PLA to obtain PLA/MWCNT-g-PLA nanocomposites with 1.0 wt.% MWCNT content. It was revealed that morphological, mechanical, and electrical properties of PLA/MWCNT-g-PLA nanocomposites were strongly dependent on the PLA chain length of MWCNT-g-PLAs. FE-SEM images exhibited that the nanocomposites containing MWCNT-g-PLA with longer PLA chain length exhibited better dispersion of MWCNTs in the PLA matrix. Initial moduli and tensile strengths of PLA/MWCNT-g-PLA composites increased with the increment of chain length of PLA grafted on MWCNTs, which attributes to the improved interfacial adhesion between the grafted PLA chains of MWCNT-g-PLA and the PLA matrix. As a result, the experimental initial modulus (2775 ± 193 MPa) of the nanocomposite including MWCNT-g-PLA with PLA chains of average molecular weight of 530 g/mol was quite close to the theoretical value (2911 MPa) predicted for the nanocomposite with perfect interfacial adhesion. Unexpectedly, electrical resistivities of PLA/MWCNT-g-PLA nanocomposites were found to increase from ∼10⁴ to ∼10¹² Ω/sq with increasing the PLA chain length of MWCNT-g-PLA, which is due to the fact that the PLA chains grafted on MWCNTs prevent the formation of the electrical conduction path of MWCNTs in the PLA matrix.     

Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite

Satisfactory impregnation of glass fiber mats may be obtained with isotactic polypropylene/montmorillonite (MMT) nanocomposites under conditions comparable with industrial conditions. However, it is demonstrated here that the high melt viscosity of the nanocomposite matrix at low shear rates may significantly influence the release of the compressive load in the glass mat and hence the glass fiber distribution in consolidated specimens. Thus, depending on the initial lay-up and overall glass fiber content, the bending modulus may either increase or decrease with increasing MMT content, whereas the tensile modulus is more consistent with micromechanical models assuming a uniform glass fiber distribution. Results from fractographic analyses show that the presence of matrix rich layers at the specimen surfaces may also lead to premature crack initiation and failure in flexion.     

Elastomeric epoxy nanocomposites: Nanostructure and properties

In polymer layered silicate nanocomposites, significant differences have been reported between the effects of the nano-reinforcement on rigid and elastomeric nanocomposites. In this paper, we have studied elastomeric nanocomposites based upon DGEBA epoxy resin filled with montmorillonite (MMT) and cured with a long-chain polyoxypropylene diamine, for comparison with analogous rigid nanocomposites. Ultrasonic mixing was used to disperse the MMT in the matrix to improve homogeneity and decrease the agglomerate size. Two different methods of nanocomposite preparation were used in which the MMT was first swollen with either the curing agent or the epoxy before the addition of, respectively, DGEBA or diamine. A better dispersion of the nanoclay in the matrix and a greater amount of intercalation occurred when the MMT was first swollen with the diamine. The effect of MMT concentrations up to 8 wt.% on the mechanical behaviour of the epoxy/MMT nanocomposites was investigated. It was found that the addition of MMT increased the tensile strength and modulus, although SAXS and TEM indicated that a significant fraction of the clay layers were not exfoliated. Nevertheless, the addition of the clay resulted in changes in the fracture surfaces, as indicated by SEM, consistent with the tensile results and indicative of toughening.     

Morphology,thermal and mechanical properties of PVC/MMT nanocomposites prepared by solution blending and solution blending + melt compounding

Two types of montmorillonite (MMT), natural sodium montmorillonite (Na-MMT) and organically modified montmorillonite (OMMT), in different amounts of 1, 2, 5, 10 and 25 phr (parts per hundred resin), were dispersed in rigid poly (vinyl chloride) by two different methods: solution blending and solution blending + melt compounding. The effects on morphology, thermal and mechanical properties of the PVC/MMT nanocomposites were studied by varying the amount of Na-MMT and OMMT in both methods. SEM and XRD analysis revealed that possible intercalated and exfoliated structures were obtained in all of the PVC/MMT nanocomposites. Thermogravimetric analysis revealed that PVC/Na-MMT nanocomposites have better thermal stability than PVC/OMMT nanocomposites and PVC. In general, PVC/MMT nanocomposites prepared by solution blending + melt compounding revealed improved thermal properties compared to PVC/MMT nanocomposites prepared by solution blending. Vicat tests revealed a significant decrease in Vicat softening temperature of PVC/MMT nanocomposites prepared by solution blending + melt compounding compared to unfilled PVC.     

Effect of organoclay platelets on morphology and properties of LLDPE/EMA blends

Blends of linear low density polyethylene (LLDPE) and ethylene-co-methyl acrylate (EMA) and their nanocomposites with two types of modified montmorillonite (organoclay) were explored in order to achieve an improved balance between stiffness and toughness. The nanocomposites were prepared in a HAAKE RHEOMIX at three different mixing sequences. The compression molded nanocomposites were utilized to evaluate the morphology and the properties like mechanical, dynamic mechanical and thermal. The results reveal that the morphology and the properties of the nanocomposites are dependent on the blending sequence as well as the type of nanoclay used. The addition of organoclay slightly increases the tensile modulus for all the nanocomposites. On the other hand, a drastic improvement of the impact strength was observed when the organoclay located at the dispersed EMA phase. The effects of clay concentration on the properties of the nanocomposites were also studied. The optimum dispersion as well as property was found for the nanocomposite at 5 wt% of the nano clay.