共查询到19条相似文献,搜索用时 49 毫秒
1.
2.
晶体取向对镍基单晶高温合金枝状组织的影响 总被引:2,自引:0,他引:2
本文研究了一种镍基单晶高温合金不同晶体取向形成的枝晶组织的变化规律,发现枝晶择优生长方向偏离热流方向时,一次枝晶形态发生明显的变化,二次枝晶分枝出现明显的不对称性。 相似文献
3.
为了有效分析螺旋选晶器温度场梯度对其选晶效果的影响,应用ProCAST和CAFE对镍基高温单晶合金DD4在螺旋选晶器中的晶粒组织演化进行了仿真模拟。结果表明,在其选晶过程中,在激冷面产生大量晶粒生长方向随机分布的晶核,随着离激冷面距离的增加,选晶器内的晶粒组织由等轴晶转变柱状晶,最终选出一个与<001>方向一致的晶粒;从选晶器内组织演化和晶粒数量变化角度分析,中间温度梯度的选晶效果均优于其他两种温度梯度。 相似文献
4.
单晶高温合金激光表面快速凝固组织的研究 总被引:2,自引:0,他引:2
本文研究一种抗热腐蚀单晶镍基高温合金的激光表面快速凝固组织。结果表明:快速凝固组织为沿<001>方向择优生长、整齐排列的极细小的胞、枝晶组织;胞、枝晶间距随激光束移动速度的增加而显著减小;快速凝固完全消除了枝晶间γ/γ’共晶与显微疏松;在胞、枝晶间区域发现MC碳化物(TiC)呈各种形态极为特殊的花状。 相似文献
5.
6.
随着单晶涡轮叶片结构的不断优化和高温合金中难熔元素添加量的增大,镍基高温合金单晶叶片在凝固过程中更易出现杂晶、条纹晶、枝晶碎臂、小角度晶界等缺陷。其中,杂晶是单晶叶片制备过程中最常见的一类凝固缺陷,严重影响单晶叶片的成品率。为了减少该类凝固缺陷的产生,提高叶片的成品率,研究镍基单晶高温合金杂晶缺陷的形成机制、影响因素及其控制措施,对提高单晶叶片的服役性能具有重要意义。因此,关于定向凝固过程中杂晶缺陷的形成机制、影响因素及其控制措施的研究,引起了国内外研究者的广泛关注。本文综述了单晶叶片的制备技术,分析了籽晶法和选晶法制备单晶叶片过程中不同位置杂晶的形成机理,分别讨论了选晶段杂晶、籽晶回熔区杂晶、缘板杂晶的影响因素和控制措施,并对未来的研究方向进行了展望。 相似文献
7.
8.
9.
镍基单晶高温合金被广泛用于制备先进航空发动机及工业燃气轮机的关键热端部件,随着铸件结构的复杂化和大型化以及合金中难熔元素的增多,凝固缺陷的形成倾向增大。其中,小角度晶界是定向凝固制备单晶高温合金铸件过程中经常出现的一类缺陷,它会破坏单晶的完整性,一旦超过容限就会对铸件的力学性能造成恶劣影响,随着单晶高温合金服役温度的不断提高,小角度晶界对性能的损害会更为严重。因此,小角度晶界日益成为镍基单晶高温合金发展和应用中需要解决的重要课题,受到国内外研究者的广泛关注。单晶中的小角度晶界与传统意义上的小角度晶界有所不同,是指相邻枝晶间的取向偏离。研究者们在不同晶界偏离角及不同温度条件下就小角度晶界对合金持久性能、蠕变性能及疲劳性能的影响进行了研究,结果发现:当偏离角较小时,小角度晶界对合金性能的影响并不明显,但是随着偏离角的增大及温度的升高,合金的性能均会降低。为了探寻有效的预防和控制措施,研究者们就小角度晶界的形成机制及影响因素进行了研究。关于小角度晶界的形成机制,被大家普遍认同的观点是:枝晶在分枝生长过程中发生了塑性变形,从而导致了枝晶的取向偏离,当枝晶再次汇聚时就会产生小角度晶界。但是,关于枝晶变形的原因则没有一致看法。另外,关于小角度晶界影响因素的研究还不是很系统,主要集中在合金成分及晶界强化元素、凝固参数及取向、铸件尺寸等方面。镍基单晶高温合金中的小角度晶界归根结底是由枝晶的取向偏离导致的,而取向偏离的影响因素复杂,因此小角度晶界的出现很难完全避免。目前,主要通过取向控制以减少小角度晶界的产生,并通过晶界强化以提高合金对小角度晶界的容限。本文阐明了单晶高温合金中的小角度晶界的概念,总结了小角度晶界对合金力学性能的影响,综述了小角度晶界形成机制的研究进展,分析了合金元素、微量元素、凝固条件和铸件结构等因素对小角度晶界形成的影响,在此基础上,提出了减少小角度晶界的措施和强化晶界的途径,最后就未来的研究方向进行了展望。 相似文献
10.
11.
Wuzong Zhou 《Advanced materials (Deerfield Beach, Fla.)》2010,22(28):3086-3092
The discovery of reversed crystal growth routes in zeolite analcime and zeolite A implies that crystal growth does not always follow the classic theory established 100 years ago. Aggregation of nanoparticles may dominate in the early stages of crystal growth, followed by surface crystallization, and then extension from surface to core of the disordered aggregates. A perfect polyhedral morphology can be developed in a thin surface crystalline layer of a particle with a disordered core. Evidence of such a novel crystal growth phenomenon can be also found in many other materials. This article highlights the recent achievements in this topic, which might have a significant impact on crystal engineering, materials science, and mineralogy. 相似文献
12.
Arafa H. Aly 《Journal of Superconductivity and Novel Magnetism》2008,21(7):421-425
We have investigated the transmittance for two kinds of photonic crystals; (i) One-dimensional metallic photonic crystals
(1DMPCs) and (ii) One-dimensional superconducting photonic crystals (1DScPCs). The variance of the intensity and the bandwidth
of the transmittance are strongly dependent on the thicknesses and frequencies. We have compared the transmittance spectra
in 1DScPCs and 1DMPCs at low frequencies, and we present some details about the transmittance spectra by using Transfer Matrix
Method (TMM) at the same conditions.
相似文献
13.
Luciano Mistura 《International Journal of Engineering Science》1995,33(15):2149-2159
The notion of a Dirac magnetic monopole in the framework of classical electrodynamics is examined from a new point of view that is suggested by the analogy with the notion of crystal dislocation. The result of this analysis is a revised form of Dirac theory that avoids the well known difficulties of the original theory and of its subsequent modifications. 相似文献
14.
15.
16.
Single crystals of 1,3,5-trinitrobenzene (TNB) and 2,4,6-trinitrotoluene (TNT) up to two centimeters in size were grown by the precipitant infusion method. Examination by an X-ray imaging method showed that the crystals, or substantial portions of them, are sufficiently perfect for many investigations. In a separate study crystals grown by this method were used for the structure determination of TNB. 相似文献
17.
18.
Spironolactone was obtained in three polymorphic and five solvated crystalline forms which differed in initial dissolution rate in water by about a factor of 12, the most rapidly dissolving form achieving concentrations about twice the equilibrium solubility; on prolonged contact with water transformation to an hydrated phase occurred. It is suggested that the facility with which spironolactone adopts different crystal forms may be utilised to enhance its dissolution-related oral bioavailability. 相似文献