复合材料加筋板的动力分析

本文构造了九自由度三角形拟协调罚函数复合材料板单元与六自由度复合材料梁单元,考虑了剪切变形与转动惯量的影响。用这两种单元对复合材料加筋板的自由振动、阻尼特性和瞬态响应问题进行了研究,给出一些有益结果。      

有限宽度和椭圆孔形状对缺口层合板强度预测的影响

本文采用有限元方法对正交各向异性材料含有不同椭圆孔形状的有限宽度板作了分析,给出了有限宽度和椭圆孔形状对应力集中因子K₁和孔边应力分布σ_y(x,0)的影响公式。数值结果表明:正交各向异性板的有限宽度和椭圆孔形状对K_r和σ_y(x,0)的影响均与各向同性材料不同,所以有限宽度和椭圆孔形状将对缺口层合板强度的预测产生影响。      

让七十多年前的影片《迷途的羔羊》重返银幕

中国电影资料馆珍藏着大量早期影片,其中许多具有珍贵的保存价值.1936年由蔡楚生编导、任光谱曲的<迷途的羔羊>是我国第一部以流浪儿童为题材的影片,也是我国儿童影片中的第一部有声片.此片在思想和艺术上都取得了突破,尤其是以童谣形式演唱的主题歌<月光光歌>感人至深,充分发挥了音乐的魅力,增强了整部影片的感染力.影片公映后,深受广大观众的欢迎和电影工作者的赞扬.七十多年过去了,当我们准备再次让它同观众见面时,却发现能够最真实、最原始记录影音效果的原底、声底片却出现了许多问题,给复制工作带来了空前的难度,这是我们从事资料影片复制工作三十多年来从未遇到过的难题.主要有以下几方面问题:     

热力公司锅炉附属仪表使用及检定情况

目前在新疆的供热公司大多存在着麻痹思想,对锅炉的附属仪表均不够重视,因此导致的安全隐患几乎都没有意识到.     

世界著名帐篷露营地

<正>住在帐篷露营地被认为是最经济实惠的旅行住宿方式,特别是在欧美国家,帐篷营地的费用通常比附近价格最为低廉的旅店还要便宜。如今,帐篷营地已经成为一项产业并且发展得非常成熟,大多数都配有能够满足生活需要的基础设施,比如厕所、淋浴间、洗衣房等,很多还配有丰富的活动场所和设备。除此之外,     

地震吓不倒档案人

2008年5月12日下午,一场史无前例的特大地震突袭四川,造成了巨大的生命财产损失.东方电气集团东方电机有限公司位于德阳市旌阳区,离震中的直线距离不到80公里,地震烈度达到7度,许多房屋损坏,属于重灾区.灾害发生后,由于组织及时,措施得力,档案部门全体职工在几分钟内有序地撤离到安全地带,无一伤亡.     

加拿大国家档案馆珍藏概览(5)——镜头中的加拿大

1989年是照片诞生后的第150周年.自从第一次将光影与化学结合起来用于从大自然中获得永恒的图片后,自然风光摄影就倍受争议.不管怎样,无论艺术还是科学,技艺还是职业,摄影都是产生于客观性与选择性之间,创造性与现实性之上的一种档案媒介.在最新的一次统计后,国家档案馆现今保存有1500万以上的照片档案.不管是百年前拍摄的还是上个星期刚刚拍摄的,照片所要传递出的要素通常是些非常独特的信息.无论照片、底片和幻灯片,是黑白的还是彩色的,无论旧与新,不管是退色了的还是色彩艳丽的,单独的还是成集合的,最为关键的是它们都见证了加拿大历史与社会的发展与兴衰.     

DCI为什么要求数字影院放映系统的分辨率为4K或2K

上世纪90年代初,美国电影电视工程师学会"数字影像层级结构"特别工作小组对成像系统的空间分辨率要求进行了研究.该小组从分辨率的角度将显示器分为低分辨率、常规分辨率、高分辨率和超高分辨率等四个层级.该小组基于以下几个基本概念,提出了空间分辨率层级的设计理念:--基于常用的数字处理和存储体系结构的一种层级整数递进;--支持基于影像贴片(image tile)的各种宽高比和空间分辨率;--能够利用适宜分辨率的贴片,针对任何应用要求来构建显示器.通过使用贴片和仅仅四个分辨率层级,便有可能构建出适用于任何用途的新显示器,而且这种显示器还可以用于显示来自任何其它层级的影像.美国数字电影倡导组织(DCI)要求数字影院放映系统的分辨率为4K或2K,属超高分辨率或高分辨率的级别.     

Mixed-dimensional van der Waals heterojunction-enhanced Raman scattering

Van der Waals heterojunctions(vdWHs)provide an excellent material system for the research of heterojunction-enhanced Raman scattering(HERS)due to their complexity and diversity.However,the traditional two-dimensional vdWHs are not conducive to the full utilization of near-field light due to the limitation of single dimension.Herein,we fabricate T-shaped mixed-dimensional SnSe₂/ReS₂ vdWHs via chemical vapor deposition and wetting transfer method,and demonstrate that the mixed-dimensional vdWHs can be used as ultrasensitive HERS chips based on the effective photo-induced charge transfer.Besides,the radiative energy transfer effect enhanced by near-field light further magnifies the HERS signals,improving the detection limit of rhodamine 6G(R6G)to femtomolar level.Furthermore,we demonstrate that the ultrasensitive screening of crystal violet in multicomponent solutions adsorbed on SnSe₂/ReS₂ vdWHs can be achieved by adjusting the laser wavelength,which has not been achieved by noble metal materials.This work provides new insights into the mixed-dimensional vdWHs and demonstrates the great application potential of T-shaped heterojunctions.     

Thermal instability and dynamic response analysis of a tensioned carbon nanotube under moving uniformly distributed external pressure

Single-walled carbon nanotubes(SWCNTs)are receiving immense research attention due to their tremendous thermal,electrical,structural and mechanical properties.In this paper,an exact solution of the dynamic response of SWCNT with a moving uniformly distributed load is presented.The SWCNT is modelled via the theories of Bernoulli-Euler-thermal elasticity mechanics and solved using Integral transforms.The developed closed-form solution in the present work is compared with existing results and excellent agreements are established.The parametric studies show that as the magnitude of the pressure distribution at the surface increases,the deflection associated with the single walled nanotube increases at any mode whilst a corresponding increase in temperature and foundation parameter have an attenuating effect on deflection.Moreover,an increase in the Winkler parameter,as well as a decrease in the SWCNT mass increases its frequency of vibration.Furthermore,an increase in the speed of the external agent decreases the total external pressure as a result of the removal of dead loads.The present work is envisaged to improve the application of SWCNT as nanodevices for structural,electrical and mechanical systems.     

叶片型面的三座标检测程序自动生成系统

本文叙述了叶片型面的三座标检测程序自动生成系统的体系结构与功能,并介绍了系统实现的技术关键,包括叶片型面的数学建模、测头检测路径规划及测量结果的处理。     

The flaring blazars of the first 1.5 years of the AGILE mission

We report the AGILE γ-ray observations and the results of the multiwavelength campaigns on seven flaring blazars detected by the mission: During two multiwavelength campaigns, we observed γ-ray activity from two Flat Spectrum Radio Quasars of the Virgo region, e.g. 3C 279 and 3C 273 (the latter being the first extragalactic source simultaneously observed with the γ-ray telescope and the hard X ray imager of the mission). Due to the large FOV of the AGILE/GRID instrument, we achieved an almost continuous coverage of the FSRQ 3C 454.3. The source showed flux above 10⁻⁶ photons/cm²/s () and showed day by day variability during all the AGILE observing periods. In the EGRET era, the source was found in high γ-ray activity only once. An other blazar, PKS 1510-089 was frequently found in high γ-ray activity. S5 0716+71, an intermediate BL Lac object, exhibited a very high γ-ray activity and fast γ-ray variability during a period of intense optical activity. We observed high γ-ray activity from W Comae, a BL Lac object, and Mrk 421, a high energy peaked BL Lac object. For this source, a multiwavelength campaign from optical to TeV has been performed.     

Nanostructured lipid carriers engineered for intranasal delivery of teriflunomide in multiple sclerosis: optimization and in vivo studies

Background: Multiple sclerosis (MS) is one of the most severe autoimmune disorder of the central nervous system (CNS).

Objective: The present research work was aimed to formulate and investigate teriflunomide (TFM)-loaded intranasal (i.n.) nanostructured lipid carriers (NLC) for the treatment of multiple sclerosis (MS).

Methods: The TFM-loaded NLC (TFM-NLC) nanoparticles were prepared by melt emulsification ultrasonication method using biodegradable and biocompatible polymers. The Box–Behnken statistical design was applied to optimize the formulation. The optimized NLC formulation was subjected to evaluate for particle size, entrapment efficiency (%), in vitro and ex vivo permeation. The safety and efficacy of optimized formulations were demonstrated using pharmacodynamic, subacute toxicity and hepatotoxicity data.

Results: Experimental data demonstrated that optimized NLC formulation (F17) showed significant size (99.82?±?1.36?nm), zeta potential (?22.29?±?1.8?mV) and % entrapment efficiency (83.39?±?1.24%). Alternatively, ex vivo permeation of TFM mucoadhesive NLC (TFM-MNLC) and TFM-NLC was observed 830?±?7.6 and 651?±?9.8?µg/cm², respectively. Whereas, TFM-MNLC shows around 2.0-folds more J_ss than the TFM-NLC. Finally, TFM-MNLC (i.n.) formulation produced the rapid remyelination in cuprizone-treated animals and decreases the number of entries in open compartment of EPM when compared with negative control and TFM-NLC (oral) animals. Simultaneously, the nanoformulation did not reflect any gross changes in hepatic biomarkers and subacute toxicity when compared with control.

Conclusions: Hence it can be inferred that the nose-to-brain delivery of TFM-MNLC can be considered as effective and safe delivery for brain disorders.     

On tapered warp-free laminates with single-ply terminations

This article reviews the current state of the art in the design of traditional uni-directional fibre laminate construction; beyond the ubiquitous balanced and symmetric design. A ply termination algorithm is then employed to develop permissible tapered designs, with single-ply terminations and ply contiguity constraints, which are free from undesirable changes in mechanical coupling characteristics. More importantly however, is the fact that all tapered designs have immunity to thermal warping distortion; which include all combinations of anti-symmetric (or cross-symmetric), non-symmetric and symmetric angle- and cross-ply sub-sequence symmetries. Tapered designs are presented for laminates with fully uncoupled properties, and those possessing extension–shearing and/or bending–twisting coupling. Such designs represent typical fuselage skin thicknesses, i.e., with between (n =) 12 and 16 plies, but due consideration is also given to new fuselage design concepts with grid-stiffeners and/or geodesic stiffener arrangements, for which thinner designs (n ⩾ 8) are of interest.     

Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming

Forming of woven fabric into a complex shape involves shear deformation of the fabric elements (warp and weft). Various researchers investigated the shear deformation during the manufacturing of thermoplastic composites (TPC) based on the hemispherical geometry, where the highly deformed edges and corners are considered as a waste. In many applications the complete formed geometry including areas around the curvature has to be used. A new idea to influence the deformation behavior of woven fabric by incorporated seams at localized sections is presented in this paper. The study is based on the photographic analysis of dry sewn preforms and thermoplastic matrix (PA12) impregnated laminates, before and after the deformation. The seams applied at the highly deformable and predefined zones help to reduce fabric shearing or to transfer the shear forces into the unsheared areas during the thermoforming process. The intensity of reduction in the fabric shear depends on the type of the sewn geometry. The results obtained can be applied in the part design, the preform engineering, and the positioning of stitches.     

Microstructure evolution during solid-state foaming of titanium

Solid-state foaming of commercially pure titanium was achieved by high-temperature expansion of high-pressure argon bubbles trapped in titanium by a powder-metallurgy technique. The foaming step was performed at constant temperature, where creep of the titanium matrix controls pore expansion, or during thermal cycling around the β allotropic temperature, which induces transformation superplasticity of the matrix. Superplastic foaming led to significantly faster pore growth and higher terminal porosity than isothermal creep foaming. During thermal cycling, the porosity remains nearly fully closed to the surface of the specimen up to the point where the maximum porosity (44%) is obtained, despite the presence of some internal pore coalescence. With continued thermal cycling, pores coalesce further by fracture of thin interpore walls and pores finally open to the surface, but without a significant increase in the amount of total porosity. The remnants of these walls result in a jagged pore morphology. Under isothermal conditions, pores remain small, equiaxed and unconnected with no pore surface roughness. However, after long annealing times, they exhibit faceting due to surface diffusion.     

Split Hopkinson pressure bar testing of 3D woven composites

Results from a series of split Hopkinson pressure bar (SHPB) tests on 3D woven tetxile composites (3DWC) are presented. These tests were done to determine the rate dependent compression response of 3DWC. Three different configurations of the 3DWC, corresponding to compression response in the plane of the material and through-the-thickness direction (out-of-plane) were studied. The rate dependent responses were compared against quasi-static test results and it was found that 3DWC showed an increase in strength in all three directions studied, however, accompanied by a transition in the failure mechanism. The in-plane orientations showed the largest increase in (about 100%) strength at the elevated rates of loading. A follow-on paper provides finite element based results that correspond to the experimental results presented here.     

Growth of hafnium and zirconium silicides by reactive diffusion

Diffusion controlled growth of the phases in Hf–Si and Zr–Si systems are studied by bulk diffusion couple technique. Only two phases grow in the interdiffusion zone, although several phases are present in both the systems. The location of the Kirkendall marker plane, detected based on the grain morphology, indicates that disilicides grow by the diffusion of Si. Diffusion of the metal species in these phases is negligible. This indicates that vacancies are present mainly on the Si sublattice. The activation energies for integrated diffusion coefficients in the HfSi₂ and ZrSi₂ are estimated as 394 ± 37 and 346 ± 34 kJ mol⁻¹, respectively. The same is calculated for the HfSi phase as 485 ± 42 kJ mol⁻¹. The activation energies for Si tracer diffusion in the HfSi₂ and ZrSi₂ phases are estimated as 430 ± 36 and 348 ± 34 kJ mol⁻¹, respectively.     

滤饼洗涤在柠檬酸生产中的应用研究

在前人研究的基础上推导出不同洗涤率下多级逆流洗涤方程．再通过计算机计算模拟实际过程，并以柠檬酸生产中酸解过程硫酸钙悬浮液为物料进行过滤洗涤试验研究．并将计算值与之相比较，结果表明：试验值和计算值基本一致．该方法可用于其它相似过程．     

Hierarchical composites: Analysis of damage evolution based on fiber bundle model

A computational model of multiscale composites is developed on the basis of the fiber bundle model with the hierarchical load sharing rule, and employed to study the effect of the microstructures of hierarchical composites on their damage resistance. Two types of hierarchical materials were considered: “hierarchical tree” (bundles-of-bundles of fibers) and self-similar particle and fiber reinforced composite (in which reinforcements at each scale level represents composites in turn consisting of lower level reinforcements and matrix). For the case of the hierarchical tree (“bundle-of-bundles” material), it was observed that the increase in the amount of hierarchy levels leads to the lower strength of material. In the self-similar fiber reinforced matrix materials, as differed from the hierarchical trees, the damage resistance of the hierarchical materials increases with increasing the amount of hierarchy levels. The effect of mixed fiber and particle reinforcement on the damage resistance of the hierarchical composites is investigated as well.