共查询到20条相似文献,搜索用时 62 毫秒
1.
数字模拟转换器产生阶梯波中的基波分量用于精密测量时,量化误差是一个重要的影响因素.在理想转换的基础上,分析了这种影响,进而提出了量子误差的补偿方法,并以实验结果验证补偿的可能性及其效果.最后讨论了数字模拟转换器产生阶梯波量化误差的性质. 相似文献
2.
陈育旺 《中国计量学院学报》1992,(1)
本文讨论了容栅传感器传输函数对示值误差的表达,分析了传输解调函数的不同组合对误差的影响,并对不同的解调函数在一个空间周期内求得了相等的最大误差。 相似文献
3.
4.
关于LabVIEW中相关函数误差的分析与修正 总被引:1,自引:0,他引:1
相关性分析在工业检测中有着很重要的应用,因此一些相应的软件在其库函数中都提供了求取相关函数的程序,在应用时发现美国NI公司的LabVIEW软件在其函数模板中提供的相关函数在对周期信号做相关时有一定的误差,本文分析了误差产生的原因,给出了修正算法及图形程序以及用该程序修正后的结果。 相似文献
5.
本文在分析形状误差评定几何模型的基础上,建立了形状误差包容评定的目标函数.应用凸规划理论对目标函数进行单谷性分析,证明了所建立的目标函数是连续的、不可微的单谷函数,从而表明目标函数的全局极小值是唯一的,为利用最优化原理对形状误差目标函数的极值优化求解提供理论依据,确保了评定数学模型和算法的正确性和可行性. 相似文献
6.
在白噪声激励下,结构响应的相关函数作为脉冲响应函数的近似可以进行模态参数辨识,但其物理意义始终缺乏明确解释;相比于脉冲响应函数,基于相关函数的辨识缺少了模态参与因子或者说质量信息,这也是工况模态分析(OMA)方法的主要缺陷。简要回顾了复模态下的自然激励技术原理,证明了白噪声激励下位移响应的相关函数等价于系统在特定初始条件下的自由响应,给出相应初始条件的计算方法;进一步提出了一种系统质量分布的辨识方法,并藉此重构得到系统脉冲响应函数。讨论了相关函数误差与信号时长及激励带宽之间的关系。通过仿真和试验验证了所得结论。 相似文献
7.
8.
9.
10.
基于样条函数拟合的凸轮升程误差评定方法研究 总被引:3,自引:0,他引:3
在凸轮升程误差设计要求与测量评定要求的基础上,提出了凸轮升程误差的二义性;进而分析现有圆柱凸轮升程误差的几种测量评定方法如“敏感点法”、“桃尖点法”的缺点,提出基于三次样条函数拟合的凸轮升程误差评定方法。理论分析和比较测量实验结果表明,该方法的评定精度比传统的敏感点法提高约13.3%。 相似文献
11.
Lucke RL 《Applied optics》1998,37(31):7248-7252
The Coltman series for obtaining the optical transfer function from measurements of the bar transfer function is mathematically derived. The bar transfer function rather than the contrast transfer function is defined so that the relation remains valid when an image exhibits phase reversal. 相似文献
12.
13.
14.
15.
16.
17.
18.
《Journal of Modern Optics》2013,60(6):477-487
Theoretical consideration is given to the error of the optical transfer function caused by noise and truncation of the measured line spread function. The error due to noise is shown to be an increasing function of the scanning range of the line spread function. An optimum scanning range is found to exist that minimizes the total error resulting from noise and truncation. Numerical calculation is presented for the case of an aberration-free circular aperture and the change in total error with varying scanning range and noise level is illustrated. 相似文献
19.
William G. Cochran 《技术计量学》2013,55(2):179-190
Consider the case of a single test unit which must be tested at some level of test stress. Suppose that the test stress level is free to be determined, and that only the survival or nonsurvival of the unit is observed. It is assumed that the unit is designed to withstand a known and specified design stress level. A Bayesian model is developed for determining the required level of test stress which maximizes the expected probability of survival at the design stress level. Engineering experience from similar past tests on similar units is used to fit the model. A practical application illustrates the method. The sensitivity of the procedure to changes in the parameters used in fitting the model is also examined. 相似文献
20.
本文推荐陈林根编著的《工程化学》对化学热力学基本公式△G=△H-T△S的引出方法,试探基础教学的改革。 相似文献