Optical Properties of Functional Hybrid Organic–Inorganic Nanocomposites

Functional hybrids are nanocomposite materials lying at the interface of organic and inorganic realms, whose high versatility offers a wide range of possibilities to elaborate tailor‐made materials in terms of chemical and physical properties. Because they present several advantages for designing materials for optical applications (versatile and relatively facile chemistry, easy shaping and patterning, materials having good mechanical integrity and excellent optical quality), numerous silica or/and siloxane based hybrid organic–inorganic materials have been developed in the past few years. The most striking examples of functional hybrids exhibiting emission properties (solid‐state dye lasers, rare‐earth doped hybrids, electroluminescent devices), absorption properties (photochromic), nonlinear optical (NLO) properties (second‐order NLO properties, photochemical hole burning (PHB), photorefractivity), and sensing are summarized in this review.     

High‐Throughput Phase‐Field Design of High‐Energy‐Density Polymer Nanocomposites

Understanding the dielectric breakdown behavior of polymer nanocomposites is crucial to the design of high‐energy‐density dielectric materials with reliable performances. It is however challenging to predict the breakdown behavior due to the complicated factors involved in this highly nonequilibrium process. In this work, a comprehensive phase‐field model is developed to investigate the breakdown behavior of polymer nanocomposites under electrostatic stimuli. It is found that the breakdown strength and path significantly depend on the microstructure of the nanocomposite. The predicted breakdown strengths for polymer nanocomposites with specific microstructures agree with existing experimental measurements. Using this phase‐field model, a high throughput calculation is performed to seek the optimal microstructure. Based on the high‐throughput calculation, a sandwich microstructure for PVDF–BaTiO₃ nanocomposite is designed, where the upper and lower layers are filled with parallel nanosheets and the middle layer is filled with vertical nanofibers. It has an enhanced energy density of 2.44 times that of the pure PVDF polymer. The present work provides a computational approach for understanding the electrostatic breakdown, and it is expected to stimulate future experimental efforts on synthesizing polymer nanocomposites with novel microstructures to achieve high performances.     

Electrical Conductivity,Selective Adhesion,and Biocompatibility in Bacteria‐Inspired Peptide–Metal Self‐Supporting Nanocomposites

Bacterial type IV pili (T4P) are polymeric protein nanofibers that have diverse biological roles. Their unique physicochemical properties mark them as a candidate biomaterial for various applications, yet difficulties in producing native T4P hinder their utilization. Recent effort to mimic the T4P of the metal‐reducing Geobacter sulfurreducens bacterium led to the design of synthetic peptide building blocks, which self‐assemble into T4P‐like nanofibers. Here, it is reported that the T4P‐like peptide nanofibers efficiently bind metal oxide particles and reduce Au ions analogously to their native counterparts, and thus give rise to versatile and multifunctional peptide–metal nanocomposites. Focusing on the interaction with Au ions, a combination of experimental and computational methods provides mechanistic insight into the formation of an exceptionally dense Au nanoparticle (AuNP) decoration of the nanofibers. Characterization of the thus‐formed peptide–AuNPs nanocomposite reveals enhanced thermal stability, electrical conductivity from the single‐fiber level up, and substrate‐selective adhesion. Exploring its potential applications, it is demonstrated that the peptide–AuNPs nanocomposite can act as a reusable catalytic coating or form self‐supporting immersible films of desired shapes. The films scaffold the assembly of cardiac cells into synchronized patches, and present static charge detection capabilities at the macroscale. The study presents a novel T4P‐inspired biometallic material.     

Strawberry‐like Core–Shell Ag@Polydopamine@BaTiO3 Hybrid Nanoparticles for High‐k Polymer Nanocomposites with High Energy Density and Low Dielectric Loss

Flexible nanocomposites comprising of polymer and high‐dielectric‐constant (high‐k) ceramic nanoparticles are becoming increasingly attractive for dielectric and energy storage applications in modern electronic and electric industry. However, a huge challenge still remains. Namely, the increase of dielectric constant usually at the cost of significant decrease of breakdown strength of the nanocomposites because of the electric field distortion and concentration induced by the high‐k filler. To address this long‐standing problem, by using nano‐Ag decorated core–shell polydopamine (PDA) coated BaTiO₃ (BT) hybrid nanoparticles, a new strategy is developed to prepare high‐k polymer nanocomposites with high breakdown strength. The strawberry‐like BT‐PDA‐Ag based ferroelectric polymer [i.e., poly(vinylideneflyoride‐co‐hexafluroro propylene), P(VDF‐HFP)] nanocomposites exhibit greatly enhanced energy density and significantly suppressed dielectric loss as well as leakage current density in comparison with the nanocomposites with the core–shell structured BT‐PDA. Coulomb‐blockade effect of super‐small nano‐Ag is used to explain the observed performance enhancement of the nanocomposites. The simplicity and scalability of the described approach provide a promising route to polymer nanocomposites for dielectric and energy storage applications.     

聚乳酸/石墨/多壁碳纳米管复合材料的制备及性能

通过共溶剂法制备了由石墨(GN)和多壁碳纳米管(MWCNTs)掺杂的聚乳酸(PLA)纳米复合材料,借助扫描电镜等手段,研究了MWCNTs用量对复合材料微观结构、热稳定性、导热和导热性能及介电性能的影响。结果显示,MWC-NTs和GN在PLA基体中形成了稳定的导电和导热网络结构,从而导致复合材料具有较低的导电和导热逾渗阈值,其值约为MWCNTs/GN=0.5/1。MWCNTs和GN均匀分散和协同增强效应促使复合材料热稳定性、导热和导电性能明显提高。与纯PLA相比,填料在逾渗阈值附近的复合材料的初始分解温度提高了近16℃,导热系数提高了1倍,体积电阻降低了109数量级。     

Graphene‐Based Linear Tandem Micro‐Supercapacitors with Metal‐Free Current Collectors and High‐Voltage Output

Printable supercapacitors are regarded as a promising class of microscale power source, but are facing challenges derived from conventional sandwich‐like geometry. Herein, the printable fabrication of new‐type planar graphene‐based linear tandem micro‐supercapacitors (LTMSs) on diverse substrates with symmetric and asymmetric configuration, high‐voltage output, tailored capacitance, and outstanding flexibility is demonstrated. The resulting graphene‐based LTMSs consisting of 10 micro‐supercapacitors (MSs) present efficient high‐voltage output of 8.0 V, suggestive of superior uniformity of the entire integrated device. Meanwhile, LTMSs possess remarkable flexibility without obvious capacitance degradation under different bending states. Moreover, areal capacitance of LTMSs can be sufficiently modulated by incorporating polyaniline‐based pseudocapacitive nanosheets into graphene electrodes, showing enhanced capacitance of 7.6 mF cm^?2. To further improve the voltage output and energy density, asymmetric LTMSs are fabricated through controlled printing of linear‐patterned graphene as negative electrodes and MnO₂ nanosheets as positive electrodes. Notably, the asymmetric LTMSs from three serially connected MSs are easily extended to 5.4 V, triple voltage output of the single cell (1.8 V), suggestive of the versatile applicability of this technique. Therefore, this work offers numerous opportunities of graphene and analogous nanosheets for one‐step scalable fabrication of flexible tandem energy storage devices integrating with printed electronics on same substrate.     

Fabrication and Properties of Micro‐ and Nanoscale Metallic Glassy Wires: A Review

A large number of metallic glasses (MGs) with high mechanical and functional performance that cannot be achieved by traditional metals in various alloy systems have been developed. At the same time, people realized that micro‐ and nanoscale wires can improve properties and extend functionality of bulk materials. Therefore, intensive effort has been made to fabricate micro‐ and nanoscale MG wires, and study their mechanical and physical behavior to achieve high performance. This article reviews fabrication, properties and applications of the wires, and presents technical and theoretical challenges, which must be tackled to achieve high‐performance MG wire devices and understand physical mechanisms of mechanical and functional behaviors of the wires.

     

A High‐Performance Lithium‐Ion Capacitor Based on 2D Nanosheet Materials

Lithium‐ion capacitors (LICs) are promising electrical energy storage systems for mid‐to‐large‐scale applications due to the high energy and large power output without sacrificing long cycle stability. However, due to the different energy storage mechanisms between anode and cathode, the energy densities of LICs often degrade noticeably at high power density, because of the sluggish kinetics limitation at the battery‐type anode side. Herein, a high‐performance LIC by well‐defined ZnMn₂O₄‐graphene hybrid nanosheets anode and N‐doped carbon nanosheets cathode is presented. The 2D nanomaterials offer high specific surface areas in favor of a fast ion transport and storage with shortened ion diffusion length, enabling fast charge and discharge. The fabricated LIC delivers a high specific energy of 202.8 Wh kg^?1 at specific power of 180 W kg^?1, and the specific energy remains 98 Wh kg^?1 even when the specific power achieves as high as 21 kW kg^?1.     

Giant Enhancement in the Supercapacitance of NiFe–Graphene Nanocomposites Induced by a Magnetic Field

The rapid rise in energy demand in the past years has prompted a search for low‐cost alternatives for energy storage, supercapacitors being one of the most important devices. It is shown that a dramatic enhancement (≈1100%, from 155 to 1850 F g^?1) of the specific capacitance of a hybrid stimuli‐responsive FeNi₃–graphene electrode material can be achieved when the charge/discharge cycling is performed in the presence of an applied magnetic field of 4000 G. This result is related to an unprecedented magnetic‐field‐induced metal segregation of the FeNi₃ nanoparticles during the cycling, which results in the appearance of small Ni clusters (<5 nm) and, consequently, in an increase in pseudocapacitive sites. The results open the door to a systematic improvement of the capacitance values of hybrid supercapacitors, while moving the research in this area towards the development of magnetically addressable energy‐storage devices.     

Design,Fabrication, and Mechanics of 3D Micro‐/Nanolattices

Over the past several decades, lattice materials have been developed and used as engineering materials for lightweight and stiff industrial structures. Recent advances in additive manufacturing techniques have prompted the emergence of architected materials with minimum characteristic sizes ranging from several micrometers to hundreds of nanometers. Taking advantage of the topological design, structural optimization, and size effects of nanomaterials, various 3D micro‐/nanolattice materials composed of different materials exhibit combinations of superior mechanical properties, such as low density, high strength (even approaching the theoretical limits), large deformability, good recoverability, and flaw tolerance. As a result, some micro‐/nanolattices occupy an unprecedented area in Ashby charts with a combination of different material properties. Here, recent advances in the fabrication and mechanics of micro‐/nanolattices are described. First, various design principles and advanced techniques used for the fabrication of micro‐/nanolattices are summarized. Then, the mechanical behaviors and properties of micro‐/nanolattices are further described, including the compressive Young's modulus, strength, energy absorption, recoverability, and tensile behavior, with an emphasis on mechanistic insights and origins. Finally, the main challenges in the fabrication and mechanics of micro‐/nanolattices are addressed and an outlook for further investigations and potential applications of micro‐/nanolattices in the future is provided.