共查询到18条相似文献,搜索用时 140 毫秒
1.
2.
熔融自发浸渗制备多孔陶瓷复合相变储能材料 总被引:1,自引:0,他引:1
研究了融盐Na2SO4与石英质多孔陶瓷预制体的自发熔融浸渗制备工艺,成功地制备出无机盐/陶瓷基(Na2SO4/SiO2)复合相变储能材料,观察和分析了该材料的物相组成与显微结构特征,对该材料的各项热物理性能和机械性能进行了测量.结果表明:自发熔融浸渗工艺比混合烧结工艺更适合于制备无机盐陶瓷基复合相变储能材料. 相似文献
3.
通过理论分析和XRD、DSC及传统热分析等实验手段研究了新型无机盐/陶瓷基复合蓄热材料的高温稳定性。结果表明,相变材料Na2SO4在1000℃高温下具有热力学稳定性,适合作为复合材料的相变介质;Na2SO4/SiO2复合蓄热材料具有良好的高温热稳定性,经100次热循环后,其热失重率低于1.26%、潜热值降低约6.19%、相变温度基本保持恒定,且熔化-凝固特性和热震稳定性良好。Na2SO4/SiO2复合材料适合作为工业炉高温蓄热器储能用蓄热材料。 相似文献
4.
5.
6.
水泥基得合功能材料的研究与开发 总被引:8,自引:0,他引:8
本文介绍了借鉴功能陶瓷和功能塑料的理论和实践,研究与开发的水泥基功能材料。并阐明了各种水泥基复合功能材料如导电材料、屏蔽材料、磁性材料、电热材料,以及高强水泥基复合功能材料等的组成、性能和复合工艺。 相似文献
7.
水泥基复合功能材料的研究与开发 总被引:9,自引:0,他引:9
本文介绍了借鉴功能陶瓷和功能塑料的理论和实践,研究与开发的水泥基功能材料。并阐明了各种水泥基复合功能材料如导电材料、屏蔽材料、磁性材料、电热材料,以及高强水泥基复合功能材料等的组成、性能和复合工艺。 相似文献
8.
9.
10.
复合相变储能材料制备工艺对其浸渗率和相对密度的影响 总被引:2,自引:0,他引:2
本文探索了Na2SO4/SiO2无机盐/陶瓷基复合相变储能材料的自发熔融浸渗工艺制度.讨论了预制体制备工艺的四个主要影响因素:造孔剂含量、成型压力、烧成温度和颗粒粒度与复合相变储能材料的浸渗率和相对密度的关系,分析了熔融盐与预制体浸渗合成时,浸渗温度、浸渗时间以及浸渗方式对复合相变储能材料浸渗率和相对密度的影响.对复合相变储能材料的物相组成和显微结构进行分析,结果表明:制备工艺对复合储能材料的物相组成影响不大,Na2SO4与SiO2两相表现出较好的高温稳定性和相容性,且分布均匀. 相似文献
11.
12.
为提升广泛应用于相变储能领域的石蜡的导热系数,在手套箱内将导热系数高、熔点低、密度小的金属Na与石蜡复合为Na/paraffin新型相变储能材料,并对其导热系数、相变潜热及储/放热特性进行研究。结果表明:5%Na/95%paraffin复合相变储能材料导热系数较纯石蜡提高了17.6倍,储/放热速率均较纯石蜡提升了1倍;经过200次循环实验后,3%Na/97%paraffin复合相变储能材料相变温度由60.58℃下降到59.65℃,相变潜热由166.7520J·g~(-1)下降到160.5632J·g~(-1),热导率由2.33W·m~(-1)·K~(-1)减少到1.98W·m~(-1)·K~(-1)。 相似文献
13.
《材料科学技术学报》2019,35(5):939-945
In this study, series of novel composite phase change materials (PCMs) were prepared through vacuum impregnation by using meso-porous carbon as a supporting matrix and n-octadcane as PCMs. The meso-porous carbon material was prepared through one-pot co-assembly method, using resorcinol and formaldehyde as carbon precursor, tetraethoxysilane as silica sources and triblock copolymer F127 as a template. And the phase behaviors of n-octadcane confined in the nano-porous structure of the meso-porous carbon were further investigated. Fourier transform-infrared spectroscopy spectra show that n-octadecane was effectively encapsulated in the porous structure of mesoporous carbon and the composite PCMs were successfully prepared. Differential scanning calorimetry results confirm that the composite PCMs possess a good phase change behavior, fast thermal-response rate and excellent thermal cycling stability. In addition, the composite PCMs possess expected heat storage and heat release properties. All these results demonstrate that the composite PCMs possess good comprehensive property so that they can be used widely in energy storage systems. 相似文献
14.
Yao K Chen S Rahimabady M Mirshekarloo MS Yu S Tay FE Sritharan T Lu L 《IEEE transactions on ultrasonics, ferroelectrics, and frequency control》2011,58(9):1968-1974
Although batteries possess high energy storage density, their output power is limited by the slow movement of charge carriers, and thus capacitors are often required to deliver high power output. Dielectric capacitors have high power density with fast discharge rate, but their energy density is typically much lower than electrochemical supercapacitors. Increasing the energy density of dielectric materials is highly desired to extend their applications in many emerging power system applications. In this paper, we review the mechanisms and major characteristics of electric energy storage with electrochemical supercapacitors and dielectric capacitors. Three types of in-house-produced ferroic nonlinear dielectric thin film materials with high energy density are described, including (Pb(0.97)La(0.02))(Zr(0.90)Sn(0.05)Ti(0.05))O(3) (PLZST) antiferroelectric ceramic thin films, Pb(Zn(1/3)Nb(2/3))O(3-)Pb(Mg(1/3)Nb(2/3))O(3-)PbTiO(3) (PZN-PMN-PT) relaxor ferroelectric ceramic thin films, and poly(vinylidene fluoride) (PVDF)-based polymer blend thin films. The results showed that these thin film materials are promising for electric storage with outstandingly high power density and fairly high energy density, comparable with electrochemical supercapacitors. 相似文献
15.
16.
为解决单一有机相变材料二十烷(n-Eicosane)导热性差及在相变过程中易发生泄漏的问题,本实验选取玉米秸秆作为生物质原料,通过700℃高温热解、KOH刻蚀改性制备了具有多级孔道结构的生物炭(KBC)材料,再通过乙醇熔融、真空浸渍的方法将二十烷封装到生物炭内部孔道,得到了一种生物炭/二十烷(KBC/n-Eicosane)复合定型相变材料。通过SEM、XRD、FTIR等表征手段研究了复合材料的微观结构和形貌,同时利用TG及DSC测试了复合相变材料的热稳定性和储热性能,并探讨了复合相变材料中二十烷不同用量与焓值的关系。结果表明,复合相变材料的焓值与二十烷的用量成正比,当复合相变材料中生物炭与二十烷的质量比为1∶2时,复合相变材料未明显泄漏,定型效果良好,此时对应的熔融焓和凝固焓值分别为121.3 J·g-1和117.6 J·g-1,经过100次循环储热和放热性能测试后,未产生渗漏现象,相变焓值亦无明显变化,表明该复合相变材料的储热能力和稳定性较好。此外,还通过模拟太阳光辐射和接入直流电源的方式测试了复合相变材料的光热转换和电热转换能力,结果表明... 相似文献
17.
18.
相变储能材料具有储热密度高,储热过程中温度变化非常小的优点。相变储能材料已广泛应用于热泵、太阳能利用等领域。本文综述了近些年来复合相变储能材料的研究状况,包括相变储能材料的制备、传热强化、相变过程数值模拟和应用等,并对复合相变储能材料的发展作了展望。 相似文献