钛合金表面等离子喷涂Y2O3稳定的ZrO2涂层的 扫描热显微镜分析

以纳米结构Y2O3稳定的ZrO2热喷涂粉末为原料,采用等离子喷涂法在Ti-6Al-4V合金上制备了纳米结构的热障涂层。利用扫描电镜(SEM)及扫描热显微镜(SThM)对涂层的微观组织及热性能进行了分析。在实验基础上建立了理论模型,并对涂层及基体的热导率进行了估算。结果表明:采用SThM分析方法估算的涂层厚度及涂层上的缺陷尺寸与采用其它分析方法测得的结果一致;虽然热导率的估算结果与采用其它方法得出的结果差异较大,但显示出扫描热显微镜分析是估算材料热导率潜在的方法。     

等离子喷涂常规和纳米8YSZ热障涂层的性能

分别采用了常规微米和纳米8YSZ粉末使用大气等离子喷涂系统进行热障涂层的制备,研究了涂层的结合强度、微观结构、常温热导率、折弯性能,试验结果表明:纳米涂层的结合强度要低于常规8YSZ涂层,但涂层的热导率、弯曲性能均优于常规8YSZ涂层.     

普通与纳米ZrO2涂层性能对比研究

以纳米ZrO2-8wt%Y2O3,粉末(YSZ)和普通微米氧化锆粉末为原料,采用等离子喷涂工艺制备了厚度为0.8mm的纳米结构氧化锆和普通氧化锆两种热障涂层,并对涂层的结构和性能进行了研究,结果表明:在该厚度下,纳米结构涂层的结合强度低于普通涂层,而其隔热性能优于普通涂层,且热流密度越大越明显.     

纳米氧化锆热障涂层组织结构和抗热冲击性能分析

采用大气等离子喷涂技术制备了纳米氧化锆热障涂层和常规热障涂层.利用FESEM和XRD对纳米氧化锆热障涂层的组织结构和物相组成进行分析.系统研究了两种热障涂层的抗热冲击性能.微观组织分析结果表明,纳米氧化锆热障涂层展现出独特的纳米—微米复合结构,包括柱状晶和未熔融或部分熔融纳米颗粒.非平衡四方相是涂层的主要物相.抗热冲击性能试验结果表明,纳米氧化锆热障涂层拥有更为优越的抗热冲击性能,这主要得益于其相对致密的结构以及微裂纹、纳米晶粒、小孔径孔隙的应力缓释作用.热应力失效是涂层失效的主要原因.     

K417G高温合金纳米氧化锆热障涂层的制备与性能

通过探讨喷涂工艺参数对纳米氧化锆涂层结构和性能影响的规律，使纳米氧化锆未熔颗粒基本上保持原始氧化锆粉末的纳米级晶粒大小，熔化的颗粒则起粘结剂的作用，使涂层内氧化锆颗粒问结合牢固，涂层结构致密。纳米氧化锆热障涂层与常规氧化锆涂层相比导热系数降低，隔热效果得到明显提高。力学试验结果则表明，纳米结构热障涂层在硬度、抗热冲击性能、耐冲击性以及结合强度等方面都明显高于常规粉末制备的涂层。     

提高等离子喷涂热障涂层隔热性能的方法

为进一步提高等离子喷涂热障涂层的隔热性能,对陶瓷材料的导热理论及热障涂层的热导率进行了研究.提出了包括寻求新型热障涂层陶瓷材料、添加掺杂剂、制备纳米涂层及双陶瓷层热障涂层等能够改善等离子喷涂涂层隔热性能的方法;并指出,采用等离子喷涂技术制备带颜色的稀土锆酸盐纳米双陶瓷层热障涂层,将会进一步改善热障涂层的隔热性能.     

纳米氧化锆热障涂层组织结构和高温稳定性能分析

采用大气等离子喷涂技术制备了纳米氧化锆热障涂层.利用FESEM和XRD对纳米氧化锆热障涂层的微观组织和物相组成进行研究.微观组织分析结果表明,纳米氧化锆热障涂层展现出独特的微观复合结构,包括未熔纳米颗粒和柱状晶组织.物相分析结果表明,纳米氧化锆热障涂层主要由非平衡四方相组成.纳米氧化锆热障涂层高温稳定性能试验结果表明,涂层晶粒度随着服役温度和服役时间的增加而增加,但仍保持纳米结构;涂层物相组成不随服役环境的变化而变化.     

纳米ZrO2-Y2O3-La2O3热障涂层的结构与性能研究

采用喷雾造粒工艺在纳米ZrO2-8wt％Y2O3(8YSZ)基体中添加了纳米La2O3,并进行团聚、热处理,作为喷涂喂料.NiCrAlY(Ni-25Cr-5Al-0.5Y,wt％)作为粘结层材料,采用等离子喷涂技术制备热障涂层.对涂层的组织结构和性能进行了表征与分析.结果表明:喷涂后涂层相组成只有稳定的t相;涂层具有典型的等离子喷涂结构;添加纳米LaO3能够降低涂层的热导率,且涂层的结合强度随掺杂量的增多而提高.     

金属喷涂、堆焊与修复——金属喷涂工艺与设备

不同喷涂方法制备马氏体不锈钢涂层组织性能对比,不同电弧喷涂工艺对3Cr13钢涂层结合强度的影响，高速电弧喷枪中电弧场的数值模拟,聚酰亚胺复合材料等离子弧喷涂温度场数值模拟,等离子体喷涂纳米结构热障涂层微观组织及性能,[编者按]     

大气等离子喷涂Sm2Zr2O7热障涂层的微观组织

以Sm2O3和ZrO2为原料,采用固相反应法制备了热喷涂用Sm2Zr2O7粉末,并采用大气等离子喷涂技术制备了Sm2Zr2O7热障涂层.利用X射线衍射(XRD)、扫描电镜(SEM)等手段研究了Sm2Zr2O7粉末和Sm2Zr2O7涂层的微观组织、涂层结合强度和热导率.结果表明,制备的Sm2Zr2O7粉末主要呈不规则颗粒状,颗粒内部结合紧密,满足热喷涂的需要.喷涂前后Sm2Zr2O7相成分没有发生任何变化,表现出良好的相稳定性能.所制备的Sm2Zr2O7热障涂层组织结构致密,涂层各界面结合紧密.涂层的孔隙率约为14.31%,结合强度约为19.8MPa.在相同的孔隙率下,Sm2Zr2O7涂层的热导率仅为YSZ涂层37.6%.     

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Coherent second phase often exhibits anisotropic morphology with specifi c orientations with respect to both the second and the matrix phases. As a key feature of microstructure, the morphology of the coherent particles is essential for understanding the second-phase strengthening eff ect in various industrial alloys. This letter reports anisotropic growth of coherent ferrite from austenite matrix in pure iron based on molecular dynamics simulation. We found that the ferrite grain tends to grow into an elongated plate-like shape, independent of its initial confi guration. The fi nal shape of the ferrite is closely related to the misfi t between the two phases, with the longest direction and the broad facet of the plate being, respectively, consistent with the best matching direction and the best matching plane calculated via the Burgers vector content(BVC) method. The strain energy calculation in the framework of Eshelby's inclusion theory verifi es that the simulated orientation of the coherent ferrite is energetically favorable. It is anticipated that the BVC method will be applicable in analysis of anisotropic growth and morphology of coherent second phase in other phase transformation systems.     

RHEOLOGY FEATURE OF SIMPLE METAL MELT

The rheology feature of Sb, Bi melt and alloys was studied using coaxial cylinder high-temperature viscometer. The results showed that the curve of torsion-rotational speed for Sb melt presents a linear relation in all measured temperature ranges, whereas for the Bi melt, the curve presents obvious non-Newtonian feature within the low temperature range and at relative high shear stress. The rheology feature of Sb80Bi20 and Sb20Bi80 alloy melts was well correlated with that of Sb and Bi, respectively. It is considered that the rheology behavior of Sb melt plays a crucial role in Sb80Bi20 alloy and that of Bi melt plays a crucial role in Sb20Bi80 alloy.     

Effect of Short-Time Aging on the Pitting Corrosion Behavior of a Novel Lean Duplex Stainless Steel 2002

The effect of short-time aging in the temperature range between 400 and 1000 °C on the pitting corrosion behavior and mechanical property of a novel lean duplex stainless steel(LDSS) 2002 was investigated through the potentiostatic critical pitting temperature(CPT) tests and the Charpy impact tests. Both the pitting corrosion resistance and the toughness of aged specimens degraded due to the precipitation of detrimental secondary phases and the most significant reduction of CPT and impact energy emerged at 650 °C concurrently. The CPT of LDSS 2002 specimen aged at 650 °C decreased by 28 °C, and the impact energy dropped from 69 to 29 J/cm~2 compared with the solution-annealed sample. Transmission electron microscopy characterization showed that the main precipitates in LDSS 2002 were Cr_2N and M_(23)C_6 along the ferrite–austenite grain boundaries.     

INTRODUCTION TO PATENTS

The invention provides a method of making a mold which can reduce SOx generation rate while preventing decrease in hardening rate in the case of using sulfuric acid for a hardener composition. The method has a mixture step in which fire-resistant particles, a hardener composition and a binder composition are mixed to obtain a composition for a mold. The hardener composition contains sulfuric acid. In the mixture step, sodium carbonate is added. A molar ratio of the sulfuric acid to the sodium carbonate is 0.5 or more and 4.0 or less.     

China Foundry Week 2014

China Foundry Week, hosted by the Foundry Institution of Chinese Mechanical Engineering Society （FICMES） each year, is a large academic event in China. It is one of the ten high-impact activities sponsored by the Chinese Mechanical Engineering Society.     

17th Conference of Hydrodynamic and Electromechanical Control Engineering Call for papers

正1.Contents In order to promote the academic exchanges and technical communication of the research in the field of fluid power transmission and control,fluid control engineering specialized committee of the Chinese Society of Theoretical and Applied Mechanics will hold the 17th Conference of Hydrodynamic and Electromechanical Control Engineering on July 27-29,2014 in Tibet,Lhasa city.     

Information for Contributors

正The Transactions of Nonferrous Metals Society of China,founded in 1991 and sponsored by The Nonferrous Metals Society of China,is published monthly now and mainly contains reports of original research which reflect the new progresses in the field of nonferrous metals science and technology,including mineral processing,extraction metallurgy,metallic materials and heat treatments,metal working,physical metallurgy,powder metallurgy,with the emphasis     

Preface

<正>We are pleased to present this Special Issue of Transactions of Nonferrous Metals Society of China containing selected papers from the First Asian Conference on Aluminum Alloys(ACAA-2013),held in Beijing,China,13–17 October 2013.This conference has been initiated,with approval of     

Information for Contributors

The Transactions of Nonferrous Metals Society of China, founded in 1991 and sponsored by The Nonferrous Metals Society of China, is published monthly now and mainly contains reports of original research which reflect the new progresses in the field of nonferrous metals science and technology, including mineral processing, extraction metallurgy, metallic materials and heat treatments, metal working, physical metallurgy, powder metallurgy, with the emphasis on fundamental science. It is the unique preeminent publication in English for scientists, engineers, under/post-graduates on the field of nonferrous metals industry. This journal is covered by many famous abstract/index systems and databases such as SCI Expanded, Ei Compendex Plus, 1NSPEC, CA, METADEX, AJ and JICST.     

Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel

The effect of heat treatment on the microstructures and mechanical properties of a newly developed austenitic heat resistant steel(named as T8 alloy) for ultra-supercritical applications have been studied. Results show that the main phases in the alloy after solution treatment are γ and primary MX. Subsequent aging treatment causes the precipitation of M_(23)C_6 carbides along the grain boundaries and a small number of nanoscale MX inside the grains. In addition, with increasing the aging temperature and time, the morphology of M_(23)C_6 carbides changes from semi-continuous chain to continuous network.Compared with a commercial HR3C alloy, T8 alloy has comparable tensile strength, but higher stress rupture strength. The dominant cracking mechanism of the alloy during tensile test at room temperature is transgranular, while at high temperature, intergranular cracking becomes the main cracking mode, which may be caused by the precipitation of continuous M_(23)C_6 carbides along the grain boundaries. Typical intergranular cracking is the dominant cracking mode of the alloy at all stress rupture tests.