首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 62 毫秒
1.
功能梯度材料及薄膜的研究现状与前景   总被引:10,自引:0,他引:10  
潘俊德 《金属热处理》1998,(6):13-14,26
介绍了功能梯度材料弄清肆展现状,功能梯度薄膜的结构与性能及合成方法,以及功能梯度薄膜的应用与前景。  相似文献   

2.
功能梯度硬质合金的发展现状与前景   总被引:8,自引:5,他引:3  
李仁琼 《硬质合金》2003,20(3):177-181
随着科学技术的发展 ,均质材料的应用已受到限制 ,于是人们开发出功能梯度材料 (FGM )。本文综述了功能梯度硬质合金的分类、制备方法和工业应用 ,并预测了功能梯度硬质合金的发展前景。  相似文献   

3.
自从梯度功能材料(FGM)的概念提出以后,全世界范围内对这种先进材料各种不同的应用做了大量的研究工作。FGM也能应用到动态高压技术中。震动技术为高压和高拉伸速率下材料性能的试验特征提供了特殊的能力。最近,已有关于梯度密度层材料在高压技术中应用的报道。但在报道中只是将一系列的薄板结合来制备梯度密度材料,如钽、铜、钛、铝、镁和TPX-塑料,因此层结构材料的密度在厚度方向上增加幅度很大。如果利用具有连续或半连续密度变化的材料将可能产生良好的效果。日本学者R. Tu等人报道了梯度材料Al-Cu系FGM的制备,这种具有中等…  相似文献   

4.
等离子冷床熔炼钛合金   总被引:22,自引:0,他引:22  
给出了梯度功能材料的定义,介绍了国内外在材料设计、制备和性能评价方面的研究现状、论述了梯度功能材料在航空航天,生物医学,机械,光学,电磁,化学,核能工程,信息传递民用及建筑等领域的应用前景和研究展望。  相似文献   

5.
梯度功能材料研究与应用   总被引:18,自引:0,他引:18  
介绍了近年来梯度功能材料(FGM)国外发展动态,较详细叙述了梯度功能材料制和协方法,如化学气相沉积法(CVD),放电等离子烧结法(SPS),复合离心铸造法(CDC)等工艺方法,并介绍了样度磁性材料、封接合金、刀具材料及生体材料的制备、性能、特点及应用。  相似文献   

6.
7.
功能梯度材料和低温制备研究现状及展望   总被引:20,自引:2,他引:18  
概述了功能梯度材料的概念、性能、应用前景和研究现状及发展方向。同时针对功能梯度材料研究的核心问题——材料合成技术,综述了低温制备工艺研究现状。最后对功能梯度材料进行了展望。  相似文献   

8.
梯度功能硬质合金工具材料的设计   总被引:1,自引:0,他引:1  
为了改善工具的切削性能,研究了将梯度功能材料的概念引入硬质合金工具领域,以实现材料表面区域具有良好的耐磨性,内部具有良好的断裂韧性,梯度组成层内获得压缩残余应力。为了开发这种新的材料,研究了工具破坏时的切削条件,并且,采用一种新改进的切削温度测量方法测量了其切削温度分布。完成了采用有限元素法测量切削温度分布的计算机辅助工程分析系统,通过改变发削温度分布的变化来测定产生的热应力。随着导入超过计算出来  相似文献   

9.
化学镀技术制备功能梯度镀层的研究现状   总被引:2,自引:0,他引:2  
作为一种低温液相制备技术,化学镀技术由于具有设备简单、操作方便、成本低等优点而更适合于制备功能梯度镀层(FGD)。概述了采用化学镀和复合化学镀方法制备FGD的原理、研究现状及其应用。  相似文献   

10.
机械工程用功能梯度材料涂层制备技术及其应用   总被引:6,自引:2,他引:4  
介绍了国内外功能梯度材料 (FGM )的应用现状和发展方向 ,分析比较了目前功能梯度材料的主要制备方法和分类。列举了现阶段FGM材料的应用范围。在此基础上提出了对我国发展应用FGM材料的一些构思和需要注意的问题  相似文献   

11.
功能梯度材料的制备方法与性能评价   总被引:1,自引:1,他引:0  
梯度功能材料(FGM)是指材料的组分沿厚度方向连续变化.从而使材料性能也呈梯度变化的一种新型材料.列举了多种FGM的制备方法,分析了FGM的热震、压缩等性能及实验手段,展望了FGM新的发展方向.  相似文献   

12.
Functionally gradient samples are prepared by getting metal Ni or Cu bonded with Ni-matrix composites reinforced by TiB_2 particles by field activated diffusion bonding process.The intermetallic compound of Ni_3Al has been applied as a mediate layer in order to reduce residual stress.The microstructure,phase composition of the interfaces between the metal and Ni_3Al are determined and the mechanical properties of the gradient materials are characterized.Elemental concentration profiles across the interfaces between layers showed significant diffusion dissolution and formation of firm bonds.Measured micro-hardness values of the sample increased monotonically from the metal substrate to the surface layer of composites.The values for the surface composite layer ranged from about 2 000 HK to 3 300 HK.The results of this investigation demonstrate the feasibility of field activated diffusion bonding process for rapid preparation of FGMs.  相似文献   

13.
W-Cu(Mo-Cu)复合材料的最新研究状况   总被引:39,自引:1,他引:38  
W/Cu或 Mo/Cu两相复合材料具有较高的导热性和低的热膨胀系数 ,在大功率器件中被视为一种很好的热沉材料。近些年来 ,有关 W/Cu或 Mo/Cu作为电子热沉材料的研究在国内外已有一些报道。本文主要就近几年钨铜复合材料研究的几个主要热点问题进行了综合性的报导。梯度结构功能材料、纳米结构材料、以及注射成型工艺在钨铜复合材料领域中的应用为当今钨铜电子材料发展的主要方向 ,并对国内外最新研究作了比较详细的综合归纳总结 ,同时提出今后发展的主要动向。  相似文献   

14.
1.IntroductionTheconceptoffunctionallygradientmaterials(FGM)wasintroducedin1984,whichwasrelatedtothedevelopmentofheatshieldingstructurematerialsforfuturespaceplaneprogramme,withthecompositionaldistributionofanFGMchanginggraduallyfromonesurfacetoth…  相似文献   

15.
航空航天、能源动力等领域高端装备对零部件在多元苛刻环境下的服役性能提出了极高要求,而功能梯度材料作为一种以功能、性能驱动为基础的先进材料,打破了原本耦合在一起的材料性能,允许其中一个或多个性能单独改善,并且使得关键零部件在不同部位具有不同功能与性能成为可能,目前已经展示出了极强的发展潜力。首先介绍了功能梯度材料的梯度特性以及优势,并概述了功能梯度材料的发展情况。其次探讨了目前常用的几种梯度制备技术,主要包括气相沉积、热喷涂、激光增材制造、粉末冶金以及离心铸造等,并针对目前研究热度较高的金属/金属、金属/陶瓷类梯度材料的研究进展进行了总结。最后指出了目前功能梯度材料制备中尚存的关键问题,并对功能梯度材料研究进行了展望。  相似文献   

16.
离心铸造Al—10%Fe合金的梯度行为   总被引:4,自引:0,他引:4  
对Al—10%Fe合金进行不同转速下的离心铸造,研究了显微组织的变化,讨论了硬度、耐磨性和热膨胀系数的梯度行为.  相似文献   

17.
用增分熔融凝固法制备梯度材料   总被引:4,自引:0,他引:4  
用增分熔融凝固法制备了一种金属基梯度材料,观察了微观组织,测量了硬度,并用电子控针测量了材料中Fe和Cr的成分。结果表明,用该方法制备金属基梯度材料是可行的。  相似文献   

18.
Cylindrical components of in situ functionally gradient composite materials of Al-19Si-5Mg alloy were manufactured by centrifugal casting. Microstructure characteristics of the manufactured components were observed and the effects of the used process factors on these character-istics were analyzed. The results of observations shows that, in thickness, the components possess microstructures accumulating lots of Mg2Si particles and a portion of primary silicon particles in the inner layer, a little Mg2Si and primary silicon particles in the outer layer, and without any Mg2Si and primary silicon particle in the middle layer. The results of the analysis indicate that the rotation rate of centrifugal casting, mould temperature, and melt pouring temperature have evidently affected the accumulation of the second phase particles. Also, the higher the centrifugal rotation rate, mould temperature, and melt pouring temperature are, the more evident in the inner layer the degree of accumulation of Mg2Si and primary silicon particles is.  相似文献   

19.
1 INTRODUCTIONOwingtotherequirementsofrepeatedserviceandlongworkingtimeofhightemperatureburners ,suchasspacecraftengine ,thematerialoftheburnersshouldhavegoodstructureprocessability ,aswellashightemperatureresistance ,thermalshockresistanceandthermalfati…  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号