共查询到20条相似文献,搜索用时 62 毫秒
1.
ICP—AES法测定Pt—Ni和Pd—Ni合金中的镍及杂质元素 总被引:1,自引:0,他引:1
采用溶液试样的ICP-AES法,测定Pt-Ni、Pd-Ni合金中的Ni和16个杂质元素。标准中不配入Pt、Pd。其对待测元素的影响是用等效浓度差减法校正;Ni部分待测元素的影响是用扣除其空白强度的方法校正。 相似文献
2.
ICP—AES等效浓度差减法测定铂网中的钯铑及杂质元素 总被引:1,自引:0,他引:1
用外加内标,标准中不配入主体元素的ICP-AES等效浓度差减法,测定了硝酸生产用铂催化网中的Pd,Rh和Ce,以及杂质元素。Pt对Pd,Rh,PtPdRh对添加元素和待测杂质的影响,用差减其相应等效浓度的方法校正。方法简便,准确,并能节省配制标准的铂。 相似文献
3.
Pd—Ni—Al涂层的循环氧化和在Na2SO4熔盐中的热腐蚀行为 总被引:1,自引:0,他引:1
研究了底温高活性(HTHA)Pd-Ni-Al涂层在1050℃人的循环氧化和Na2ASO4熔盐中的热腐蚀结果表明,Pd-Ni-Al涂层表面生成一层致密的氧化膜,抗热腐蚀性能接近Pt-Al涂层,优于单渗铝涂层,初步分析了Pd-Ni-Al涂层的高温腐蚀机理。 相似文献
4.
研究了用ICP─AES法测定高纯Au─Ga合金中Ga及萃取Au后测定微量Pt、Pd、Rh、Jr、Ag等25个杂质元素的方法。元素间的干扰用等效浓度法校正。杂质元素标准加入回收率为84~103%:相对标准偏差为2.6~17%,取2.5g样品时测定下限为5×10 ̄(-5)~2×10 ̄(-4)%。 相似文献
5.
6.
7.
在TritonX-100存在下的乙酸盐缓冲溶液中用硫代米Chi桐(TMK)分光光度法同时测定Pd,Pt实验表明,室温下Pd(Ⅱ)Pt(Ⅳ)共存互相干扰,但在抗坏血酸(VC)存在下可抑掉大量Pt的显色而测定Pd,在VC-KI存在下Pd,Pt同时显色,差减法测定Pt。采用双(十二烷基亚磺酰)乙烷高选择性萃取Pd,Pt而与贱金属和其它贵金属分离,可应用于高纯Cu,Ni及矿物中Pd,Pt的测定,获得满意的 相似文献
8.
9.
Pt-Pd-Rh合金的高温氧化 总被引:1,自引:1,他引:0
用TG 热重仪测定Pt- Pd - Rh 合金的挥发失重曲线, 用X 光电子能谱(XPS) 和溅射剥离技术确定其氧化态表层及次表层组元化学状态和浓度。结果表明合金挥发失重曲线遵循: Δm = K0tn ———直线失重规律。合金组元化学态为Pt0 、Pd0 、Rh0 、Rh2O3 , 次表层为Pt0 、Pd0 、Rh0 、RhO2 , Pd0 相对富集于表层。讨论了Pd 及少量Ru 、Ce 对Pt - Pd - Rh合金挥发失重曲线和表层结构的影响 相似文献
10.
11.
V. Kulikovsky V. Vorlí?ek M. Stranyánek R. ?tvrtlík A. Kurdyumov 《Surface & coatings technology》2008,202(9):1738-1745
Hydrogen-free amorphous and nanocrystalline films were prepared by magnetron sputtering of the SiC or Si targets. Mechanical properties (hardness, elastic modulus, intrinsic stress) and film structures were investigated in dependence on the substrate bias and temperature. It was found that both hardness and elastic modulus of all amorphous a-SiC films prepared at different substrate temperatures and biases are always lower than those for bulk α-SiC single crystal while the hardness of partially crystalline SiC films is higher and the elastic modulus lower than those for α-SiC one. In contrast, both hardness and elastic modulus of all amorphous Si films are always lower than those for nanocrystalline Si films which show approximately the same value as the Si single crystal. 相似文献
12.
金刚石、CBN有序排列及择优取向工具的研发及应用 总被引:1,自引:0,他引:1
有序排列/择优取向超硬材料工具的技术创新,将广泛适用于电镀、树脂、陶瓷、金属结合剂制品工具中,使用超硬材料颗粒在结合剂中均匀排列并择优定向,以最大潜能的发挥超硬材料各个方面固有的特性。并针对不同的加工对象,有选择性的使用超硬材料各自不同的特性,从而使超硬材料工具将以经济、高质与高效的优势替代传统的超硬材料工具并将进入新兴的加工领域,为生产企业带来新的发展机遇。本文将对有序排列与择优取向技术的研究现状及其在不同的金刚石工具中的应用做一阐述。 相似文献
13.
14.
15.
16.
《稀有金属材料与工程》2006,23(4):23-26
结合近年来现场试验与施工实践,分析研究了中小型镍材(工业纯镍)设备与管道的特点、性能、焊接缺陷与产生原因,以及防止与消除其缺陷、优化制造施焊质量的工艺措施,并总结了若干条注意事项。 相似文献
17.
软起动器及其应用设计和调试 总被引:1,自引:0,他引:1
软起动是电机起动一种新概念,跟传统的直接起动、星三角起动,自耦降压起动相比,有很大的优点。本文在介绍软起动的基础上,分析了软起动器在应用没计、现场调试及使用中应注意的问题。 相似文献
18.
齿轮类零部件的选材及热加工分析 总被引:1,自引:0,他引:1
分析了齿轮类零部件材料的正确选择及热加工处理工艺(热处理工艺、焊接工艺).采用电子束焊接这类零部件,合理匹配齿轮的选材和热处理工艺,可有效防止在制造和运行时产生的失效,从而保证了零部件的制造质量和安全运行,提高了生产效率. 相似文献
19.
20.
Plasma alloying and spheroidization process and development 总被引:1,自引:0,他引:1
J. S. O’Dell E. C. Schofield T. N. McKechnie A. Fulmer 《Journal of Materials Engineering and Performance》2004,13(4):461-467
Elemental and blended refractory metal powders were processed using a plasma alloying and spheroidization (PAS) process. The
powders were characterized to determine changes in chemistry and morphology after processing. Five refractory metal powders
were evaluated during this investigation: (1) crystalline W, (2) spray dried Mo, (3) W-25 wt.% Re composite powder, (4) W-2
wt.% Re composite powder, and (5) Mo-40 wt.% Re composite powder. Benefits of the PAS process, such as a two-order of magnitude
reduction in oxygen contamination, production of highly spherical powders for enhanced flow characteristics, and the ability
to produce prealloyed powders were demonstrated.
This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September
15–17, 2003, in Indianapolis, Indiana, and appears on pp. 441–47 of the Proceedings. 相似文献