CFD simulation of methane steam reforming in a membrane reactor: Performance characteristics over range of operating window

Methane steam reforming is the most widely used pathway for hydrogen production. In this context, the use of a fixed bed catalytic reactor with a hydrogen-selective membrane is one of the most promising technologies to produce high purity hydrogen gas. In this work, the membrane reactor three-dimensional computational fluid dynamic (CFD) model was developed to investigate the performance. In this model, methane steam reforming global kinetic model has been coupled with the CFD model using User-Defined Function (UDF). Whereas, hydrogen permeation across the membrane is implemented by introducing source and sink formulation. The CFD simulation results were compared to the experimental data, where the developed model successfully captured the experimentally observed trends. We studied the influence of the various operating parameters, as temperature, steam to carbon ratio, sweep gas flow configuration and space velocity on the overall performance. The main observation and attained optimal operation windows from the study was discussed to provide insight into the factors affecting the overall performance.     

二甲醚水蒸气重整制氢的模型建立和数值模拟

为研究二甲醚的水蒸气重整制氢过程,设计了一种带有隔热套、瓦片式加热通道和催化反应床的重整反应器。建立了反应器的数学模型,并利用COMSOL软件对其仿真。试验研究了反应气体温度、水蒸气与二甲醚的物质的量比和反应器结构参数对二甲醚转化率、氢产率的影响。模拟结果显示了二甲醚水蒸气重整制氢过程中的各组分质量分布及不同温度、不同水醚物质的量比下二甲醚转化率和制氢率情况,给重整器的研究提供了参考。通过试验验证了模型的可行性,获得了微型催化重整床反应器的设计数据。结果显示较高的进口温度可以提升反应速率,从而提高二甲醚转化率;水醚物质的量比的提高促进了正反应,加快了二甲醚的消耗,提高了二甲醚的转化率和氢产率。     

A CFD approach on simulation of hydrogen production from steam reforming of glycerol in a fluidized bed reactor

Hydrogen production from steam reforming of glycerol in a fluidized bed reactor has been simulated using a CFD method by an additional transport equation with a kinetic term. The Eulerian–Eulerian two-fluid approach was adopted to simulate hydrodynamics of fluidization, and chemical reactions were modelled by laminar finite-rate model. The bed expansion and pressure drop were predicted for different inlet gas velocities. The results showed that the flow system exhibited a more heterogeneous structure, and the core-annulus structure of gas–solid flow led to back-mixing and internal circulation behaviour, and thus gave a poor velocity distribution. This suggests the bed should be agitated to maintain satisfactory fluidizing conditions. Glycerol conversion and H₂ production were decreased with increasing inlet gas velocity. The increase in the value of steam to carbon molar ratio increases the conversion of glycerol and H₂ selectivity. H₂ concentrations in the bed were uneven and increased downstream and high concentrations of H₂ production were also found on walls. The model demonstrated a relationship between hydrodynamics and hydrogen production, implying that the residence time and steam to carbon molar ratio are important parameters. The CFD simulation will provide helpful data to design and operate a bench scale catalytic fluidized bed reactor.     

Thermodynamic analysis of hydrogen production via sorption-enhanced steam methane reforming in a new class of variable volume batch-membrane reactor

Combined reaction–separation processes are a widely explored method to produce hydrogen from endothermic steam reforming of hydrocarbon feedstock at a reduced reaction temperature and with fewer unit operation steps, both of which are key requirements for energy efficient, distributed hydrogen production. This work introduces a new class of variable volume batch reactors for production of hydrogen from catalytic steam reforming of methane that operates in a cycle similar to that of an internal combustion engine. It incorporates a CO₂ adsorbent and a selectively permeable hydrogen membrane for in situ removal of the two major products of the reversible steam methane reforming reaction. Thermodynamic analysis is employed to define an envelope of ideal reactor performance and to explore the tradeoff between thermal efficiency and hydrogen yield density with respect to critical operating parameters, including sorbent mass, steam to methane ratio and fraction of product gas recycled. Particular attention is paid to contrasting the variable volume batch-membrane reactor approach to a conventional fixed bed reaction–separation approach. The results indicates that the proposed reactor is a viable option for low temperature distributed production of hydrogen from methane, the primary component of natural gas feedstock, motivating a detailed study of reaction/adsorption kinetics and heat/mass transfer effects.     

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell

Mathematical modeling and simulation analysis of the dimethyl ether steam reforming reaction system were carried out in the study. The numerical results of simulation and experiment were consistent. The effects of reaction conditions on the conversion of dimethyl ether and hydrogen production were analyzed. The internal structure of the reforming reactor was adjusted to obtain higher hydrogen production efficiency. The study established the reforming hydrogen production industry system, and analyzed the thermal efficiency of the system. The results show that when the temperature of the conversion bed is 673 K, the inlet flow rate of the mixture gas is 0.5 ms^?1 and the ratio of water to ether is 3, the dimethyl ether steam reforming reaction system could obtain the dimethyl ether conversion rate of 90%, the hydrogen production rate of 88% and system thermal efficiency of 74%.     

Modeling and analysis of a 5 kWe HT-PEMFC system for residential heat and power generation

We present a high-temperature proton exchange membrane fuel cell (HT-PEMFC) system model that accounts for fuel reforming, HT-PEMFC stack, and heat-recovery modules along with heat exchangers and balance of plant (BOP) components. In the model developed for analysis, the reaction kinetics for the fuel reforming processes are considered to accurately capture exhaust gas compositions and reactor temperatures under various operating conditions. The HT-PEMFC stack model is simplified from the three-dimensional HT-PEMFC CFD models developed in our previous studies. In addition, the parasitic power consumption and waste heat release from the various BOP components are calculated based on their heat-capacity curves. An experimental fuel reforming reactor for a 5.0 kW_e HT-PEMFC system was tested to experimentally validate the fuel reforming sub model. The model predictions were found to be in good agreement with the experimental data in terms of exhaust gas compositions and bed temperatures. Additionally, the simulation revealed the impacts of the burner air-fuel ratio (AFR) and the steam reforming reactor steam-carbon ratio on the system performance and efficiency. In particular, the combined heat and power efficiency of the system increased up to 78% when the burner AFR was properly adjusted. This study clearly illustrates that an HT-PEMFC system requires a high degree of thermal integration and optimization of the system configuration and operating conditions.     

Numerical and experimental study on hydrogen production via dimethyl ether steam reforming

This work presents the characteristics of catalytic dimethyl ether (DME)/steam reforming based on a Cu–Zn/γ-Al₂O₃ catalyst for hydrogen production. A kinetic model for a reformer that operates at low temperature (200 °C–500 °C) is simulated using COMSOL 5.2 software. Experimental verification is performed to examine the critical parameters for the reforming process. During the experiment, superior Cu–Zn/γ-Al₂O₃catalysts are manufactured using the sol-gel method, and ceramic honeycombs coated with this catalyst (1.77 g on each honeycomb, five honeycombs in the reactor) are utilized as catalyst bed in the reformer to enhance performance. The steam, DME mass ratio is stabilized at 3:1 using a mass flow controller (MFC) and a generator. The hydrogen production rate can be significantly affected depending on the reactant's mass flow rate and temperature. And the maximum hydrogen yield can reach 90% at 400 °C. Maximum 8% error for the hydrogen yield is achieved between modeling and experimental results. These experiments can be further explored for directly feeding hydrogen to proton exchange membrane fuel cell (PEMFC) under the load variations.     

Qualitative investigation on effects of manifold shape on methanol steam reforming for hydrogen production

Fluid velocity distribution among microchannels plays important role on the reaction performances. In this work, the velocity distribution among microchannels with two different manifold structures is compared by a three-dimensional CFD model under two situations respectively, no reaction and methanol steam reforming occurs. Then the performances of methanol steam reforming in both plates are experimentally investigated, and the effect of manifold shape on the hydrogen production performances is qualitatively analyzed by the combination of simulation results of velocity distribution. It is found that the microchannel plate with right-angle manifold enables narrow velocity distributions under different entrance velocities and reaction temperatures, whether no reaction occurs or methanol steam reforming is progressing, which can be the critical element results in better conversion rate and selectivity of process than that of the microchannel plate with oblique-angle manifold. Optimizing the structural parameters to facilitate a relatively uniform velocity distribution to increase the hydrogen production performances may be a key factor to be considered.     

Numerical simulation and experimental study of hydrogen production from dimethyl ether steam reforming in a micro-reactor

To enhance the heat and mass transfer during dimethyl ether (DME) steam reforming, a micro-reactor with catalyst coated on nickel foam support was designed and fabricated. A two-dimensional numerical model with SIMPLE algorithm and finite volume method was used to investigate 1) the fluid flow, 2) the heat transfer and 3) chemical reactions consist of DME hydrolysis, methanol steam reforming, methanol decomposition and water gas shift reactions. Both the numerical and the experimental results showed that the DME conversion in the micro-reactor is higher than that in the fixed bed reactor. The numerical study also showed that the velocity and the temperature distribution were more uniform in the micro-reactor. Wall temperature, porosity and steam/DME ratio have been investigated in order to optimize the process in the micro-reactor. The wall temperature of 270 °C and the steam/DME feed ratio of 5 were recommended. Meanwhile the results indicate that a larger porosity will give a higher DME conversion and CO concentration.     

Direct reforming of Methane–Ammonia mixed fuel on Ni–YSZ anode of solid oxide fuel cells

To control the temperature distribution in the Ni–YSZ (yttria-stabilized zirconia) anode of solid oxide fuel cells (SOFCs) by efficiently utilizing the heat generated by electrochemical reactions, the supply of methane–ammonia mixed fuel is proposed. The reaction characteristics of reforming/decomposition of the mixed fuel on a Ni–YSZ catalyst are experimentally investigated. A mixture gas of methane, steam, ammonia, and balance argon is supplied to a packed bed catalyst placed in a quartz tube in an electric furnace. The crushed Ni–YSZ anode of SOFCs is used as the catalyst. The exhaust gas composition is analyzed by gas chromatography and the streamwise temperature distribution of the catalyst bed is measured by an infrared camera. It is found that ammonia decomposition preferentially proceeds and steam methane reforming becomes active after sufficient ammonia has been consumed. A low-temperature region is formed by steam methane reforming owing to its strongly endothermic nature. Its position moves downstream while its magnitude decreases as the ammonia concentration in the fuel increases. This shows that the local temperature distribution can be controlled by tuning the ratio of methane to ammonia in the mixed fuel. It is also found that, at a certain mixture ratio, the mixed fuel realizes a hydrogen production rate higher than that for only methane or ammonia.     

Modelling and experimental investigation of compact packed bed design of methanol steam reformer

A comprehensive mathematical model was developed to analyse methanol steam reforming in catalytic packed-bed tubular reactor. All the important aspects of reaction kinetics of main reactions and thermodynamic terms of heat and mass transfer were studied for commercially available CuO/ZnO/Al₂O₃ catalysts from Süd-Chemie. This numerical model was simulated using Engineering Equation Solver (EES). Through the set of organized simulation studies, the basic operational boundary conditions of operating temperature (573 K) with respect to complete conversion of methanol and optimum hydrogen generation, optimum S/C ratio (1.4) of methanol water mixture feed and operating capacity of one tubular reactor array were discovered. At temperatures near 573 K it was found that the reformate gas does not require any purification/filtration to be supplied to a HT-PEMFC as the CO concentration in reformate gas was low (below 30000 ppm). The simulation work for understanding the effect of different operating condition(s) on the reformer performance generated design of experiment for investigation of the efforts carried out to evaluate, build and demonstrate a 0.25 kWe equivalent methanol reformer for HT-PEM fuel cell system.The paper discusses few of the important aspects on the experimental investigation of effect of operating conditions on methanol steam reformer design with packed bed configuration for hydrogen production. The basic investigation included the analysis of effect of design and operating parameters on the methanol conversion and quality of reformate gas generation (amount of CO). The investigation also covers the analysis of heat and mass transfer along with chemical reaction and generation of species to achieve optimum process parameters and system efficiency. These investigations led to finalise, the operating parameters and basic design philosophy of the packed bed tubular methanol steam reformer for 5 kWe HT-PEMFC system application.     

Hydrogen production in a zigzag and straight catalytic wall coated micro channel reactor by CFD modeling

Hydrogen production from steam reforming of methanol for fuel cell application was modeled in a wall coated micro channel reactor by CFD approach. Heat of steam reforming (SR) was supplied from catalytic total oxidation (TOX) of methanol on Cu/ZnO/Al₂O₃ catalyst and Heat conducts from TOX to SR zone through Steel divider wall between two channels. Heat integration was compared in zigzag and straight geometry of microreactor by CFD modeling. The model is two dimensional, steady state and containing five zones: TOX fluid, TOX catalyst layer, steel wall of the channel, SR catalyst layer and SR fluid. Set of partial differential equations (PDEs) including x and y momentum balance, continuity, partial mass balances and energy balance was solved by finite volume method. Stiff reaction rates were considered for methanol total oxidation (TOX), methanol steam reforming (SR), water gas shift (WGS) and methanol decomposition (MD) reactions. The results show that zigzag geometry is better than straight one because heat and mass transfer in zigzag reactor are more than straight. Conversion of methanol in zigzag geometry is greater than straight one. In the outlet of zigzag micro channels, carbon monoxide selectivity is less and hydrogen mole fraction is more than straight one.     

Biogas upgrading for on-board hydrogen production: Reforming process CFD modelling

Hydrogen production through fuel reforming can be used to improve IC (internal combustion) engines combustion characteristics and to lower vehicle emissions. In this study, a computational fluid dynamics (CFD) model based on a detailed kinetic mechanism was developed for exhaust gas reforming of biogas to synthetic gas (H₂ and CO). In agreement with experimental data, the reactor's physical and chemical performance was investigated at various O₂/CH₄ ratios and gas hourly space velocities (GHSV). The numerical results imply that methane reforming reactions are strongly sensitive to O₂/CH₄ ratio and engine exhaust gas temperature. It was also found that increasing GHSV results in lower hydrogen yield; since dry and steam reforming reactions are relatively slow and are both dependent on the flow residence time. Furthermore, the hot spot effect, which is associated to oxidation reforming reactions, was investigated for catalyst activity and durability.     

A kinetic model for air-steam reforming of bio-oil over Rh–Ni/γ-Al2O3 catalyst: Acetol as a model compound

A new kinetic model is proposed for catalytic reforming of acetol to synthesis gas over a Rh–Ni/γ-Al₂O₃ catalyst. Acetol is one of the most important bio-oil model compounds formed under reactive flash volatilization reaction conditions. The model was implemented in the Aspen Plus simulation package and used to predict the product gas composition at different reaction temperatures and steam and oxygen ratios. The contributions of the reactions both in the reactor freeboard and the catalytic bed were assessed using CSTR and PFR reactor models, respectively. The reaction scheme included decomposition, steam reforming, and water-gas shift reactions. The results from the model predicted the product distribution within an acceptable degree of tolerance. This study confirms that thermal decomposition and partial oxidation of acetol precede the catalytic reactions involving steam. The effects of temperature, oxygen concentration in the feed, the volume of the freeboard, and the catalyst bed height can all be evaluated with this new kinetic model. This work suggests that bio-oil decomposed into different fractions of molecules like acetol can be successfully modelled by a series of decomposition reactions followed by partial oxidation and catalytic steam conversion. The heat transfer within the catalyst bed is found to be critical for achieving a good match with the experimental results.     

Novel hydrogen‐rich gas production by steam gasification of biomass in a research‐scale rotary tubular helical coil gasifier

The concept of biomass steam gasification offers platform for production (i) of hydrogen, (ii) hydrocarbons and (iii) value added chemicals. Majority of these developments are either in nascent or in pilot/demonstration stage. In this context, there exists potential for hydrogen production via biomass steam gasification. Gaseous products of biomass steam gasification consist of large percentage of CO, CH₄ and other hydrocarbons, which can be converted to hydrogen through water‐gas‐shift reaction, steam reforming and cracking respectively. Although there are many previous research works showing the potential of production of hydrogen from biomass in a two stage process, challenges remain in extended biomass and char gasification so as to reduce the amount of carbon in the residual char as well as improve conversion of heavy hydrocarbon condensates to hydrogen rich gas. In the current work, the characteristics of biomass steam gasification in an in‐house designed rotary tubular helical coil reactor at temperatures less than 850 °C, in the presence of superheated steam, were presented. The objectives were to obtain high carbon conversion in the primary biomass steam gasification step (upstream) and high product gas yield and hydrogen yield in the secondary fixed bed catalytic step (downstream). The influence of temperature, steam‐to‐biomass ratio and residence time on product gas yield in the rotary tubular helical coil gasifier was studied in detail using one of the abundantly available biomass sources in India‐rice husk. Further, enhancement of product gas yield and hydrogen yield in a fixed bed catalytic converter was studied and optimized. In the integrated pathway, a maximum gas yield of 1.92 Nm³/kg moisture‐free biomass was obtained at a carbon conversion efficiency of 92%. The maximum hydrogen purity achieved under steady state conditions was 53% by volume with a hydrogen yield of 91.5 g/kg of moisture‐free biomass. This study substantiates overall feasibility of production of high value hydrogen from locally available biomass by superheated steam gasification followed by catalytic conversion. Copyright © 2016 John Wiley & Sons, Ltd.     

Investigation of the benefits of diabatic microreactors for process intensification of the water-gas shift reaction within the steam reforming process

Currently, the steam reforming process is the largest industrial source of hydrogen. Improving its efficiency can help to reduce associated carbon emissions and hydrogen production costs. Intensifying the water-gas shift reaction using microreactors with integrated cooling is one way of achieving this. In this study, a 2-D computational model of one of these microreactors is developed, validated with experimental data, and then used to demonstrate how microreactors can enhance the conversion of the water-gas shift reaction beyond what can be achieved using conventional packed bed reactors. These results are then generalized into a full system model of the steam reforming process to demonstrate how microreactors can reduce hydrogen production costs. The results suggest that microreactors can significantly reduce the required reactor volume and catalyst loading for the water-gas shift reaction and can similarly reduce the hydrogen production costs associated with the steam reforming process.     

甲烷快速部分氧化重整试验研究

采用常规浸渍法制备了Rh/α-Al2O3催化剂,建立了甲烷快速部分氧化重整试验体系。通过控制变量法,考察了甲烷快速部分氧化重整反应中反应条件参数(CH4/O2、反应气体预混合温度、空速)变化对反应物的转化率、反应产物及分布的影响。试验结果表明,在试验条件下,CH4的转化率始终大于85%,O2转化率接近100%,CO的选择性为85%左右,H2的选择性为40%～60%。反应过程大致为催化剂入口处的部分氧化反应和下游的水蒸气重整,大部分的CO由部分氧化产生,而H2的产生受水蒸气重整反应的影响较大;随着反应温度的上升,CH4的转化率上升,CO,H2的选择性也上升;随着空速的增大,H2的选择性减小,表明甲烷催化部分氧化反应是一个受传质控制的反应。     

Enhancement effect of heat recovery on hydrogen production from catalytic partial oxidation of methane

The effect of heat recovery on hydrogen production from catalytic partial oxidation of methane (CPOM) and its reaction characteristics in a reactor are investigated using numerical simulations. The reactor is featured by a Swiss-roll structure in which a rhodium (Rh) catalyst bed is embedded at the center of the reactor. By recovering the waste heat from the product gas to preheat the reactants, it is found that the combustion, steam reforming and dry reforming of methane in the catalyst bed are enhanced to a great extent. As a result, the methane conversion and hydrogen yield are improved more than 10%. Considering the operation conditions, a high performance of hydrogen production from CPOM can be achieved if the number of turns in the reactor is increased or the gas hourly space velocity (GHSV) of the reactants in the catalyst bed is lower. However, with the condition of heat recovery, the flow direction of the reactants in the reactor almost plays no part in affecting the performance of CPOM. In summary, the predictions reveal that the reactor with a Swiss-roll structure can be applied for implementing CPOM with high yield of hydrogen.     

Analysis of phase change heat transfer with annulus 1 kW class methanol steam reforming reaction under high-pressure operation

A fuel cell air independent propulsion (AIP) system of underwater vehicle requires a hydrogen storage system. The methanol steam reforming system is a candidate of hydrogen storage which can produce hydrogen from chemical reaction. Different from reforming system for station fuel cell system, the methanol steam reformer (MSR) for underwater vehicle requires high-pressure operation.Since the longitudinal temperature uniformity is a core parameter of conversion efficiency of steam reforming system, this study is focused on computational analysis of phase change heat transfer through the annulus for methanol steam reforming reaction. The annulus MSR using phase change material was developed to improve the temperature uniformity. The simulation model is verified with safety and performance analysis code (SPACE). The performance parameters of MSR were flow arrangement, steam to carbon ratio (SCR), and gas hourly space velocity (GHSV). The results were analyzed in terms of the hydrogen yield, heat flux, liquid mass flow rate, and methanol conversion rate. The flow arrangement varied the methanol conversion rate to a minor extent of approximately 0.1% because wall temperature was maintained uniformly. In the case of SCR, the hydrogen yield at SCR 2.5 was 0.637 (dry basis), which was the highest yield rate. Also, if GHSV was increased, hydrogen yield decreased from 0.690 (dry basis) to 0.527 (dry basis). The heat transfer pattern was also analyzed and it was found that steam is interactively condensed along with the progress of the reforming reaction.     

Thermal analysis of a micro tubular reactor for methanol steam reforming by optimizing the multilayer arrangement of catalyst bed for the catalytic combustion of methanolr

Packed bed tube reactors are commonly used for hydrogen production in proton exchange membrane fuel cells. However, the hydrogen production capacity of methanol steam reforming (MSR) is greatly limited by the poor heat transfer of packed catalyst bed. The hydrogen production capacity of catalyst bed can be effectively improved by optimizing the temperature distribution of reactor. In this study, four types of reactors including concentric circle methanol steam reforming reactor (MSRC), continuous catalytic combustion methanol steam reforming reactor (MSRR), hierarchical catalytic combustion methanol steam reforming reactor (MSRP) and segmented catalytic combustion reactor with fins (MSRF) are designed, modeled, compared and validated by experimental data. It was found that the maximum temperature difference of MSRC, MSRR, MSRP and MSRF reached 72.4 K, 58.6 K, 19.8 K and 11.3 K, respectively. In addition, the surface temperature inhomogeneity U_f and CO concentration of the MSRF decreased by 69.8% and 30.7%, compared with MSRC. At the same reactor volume, MSRF can achieve higher methanol conversion rate, and its effective energy absorption rate is 4.6%, 3.9% and 2.6% higher than that of MSRC, MSRR and MSRP, respectively. The MSRF could effectively avoid the influence of uneven temperature distribution on MSR compared with the other designs. In order to further improve the performance of MSRF, the influences of methanol vapor molar ratio, inlet temperature, flow rate, catalyst particle size and catalyst bed porosity on MSR were also discussed in the optimal reactor structure (MSRF).