Effects of nonmetal element (B,C and Si) additives in Mg2Ni hydrogen storage alloy: A first-principles study

Nonmetal atoms (B, C and Si) are designed to add into Mg₂Ni hydrogen storage alloy and its hydride. First-principles density-functional theory calculations have been performed to investigate their crystal structures, electronic and thermodynamic properties. The calculation results present that nonmetal additions in Mg₂NiH₄ show more effective destabilization than metal additions. Especially for B and C, the decreases of formation enthalpies of Mg₂NiH₄ reach 0.19 and 0.21 eV/atom. The NiH₄ structure near B or C in Mg₂NiH₄ hydride becomes the tripod-like NiH₃ structure. The results show that the thermodynamic stabilities of Mg₂Ni and Mg₂NiH₄ exhibit a nearly linear decrease with the increasing content of nonmetal atoms. The calculated dehydrogenation energies are 59.39, 58.12, 55.84 and 55.30 kJ/mol H₂ for Mg₂NiH₄, Mg₂NiB_0.5H₄, Mg₂NiC_0.5H₄ and Mg₂NiSi_0.5H_4, respectively. It is found that the addition of nonmetal atoms favors the dehydrogenation reaction for Mg₂Ni hydrogen storage material. In addition, the effects of nonmetals to the heat capacities and vibrational entropies of Mg₂Ni and Mg₂NiH₄ are also analyzed.     

First-principles study on the dehydrogenation properties and mechanism of Al-doped Mg2NiH4

Mg₂NiH₄, with fast sorption kinetics, is considered to be a promising hydrogen storage material. However, its hydrogen desorption enthalpy is too high for practical applications. In this paper, first-principles calculations based on density functional theory (DFT) were performed to systematically study the effects of Al doping on dehydrogenation properties of Mg₂NiH₄, and the underlying dehydrogenation mechanism was investigated. The energetic calculations reveal that partial component substitution of Mg by Al results in a stabilization of the alloy Mg₂Ni and a destabilization of the hydride Mg₂NiH₄, which significantly alters the hydrogen desorption enthalpy ΔH_des for the reaction Mg₂NiH₄ → Mg₂Ni + 2H₂. A desirable enthalpy value of ∼0.4 eV/H₂ for application can be obtained for a doping level of x ≥ 0.35 in Mg_2−xAl_xNi alloy. The stability calculations by considering possible decompositions indicate that the Al-doped Mg₂Ni and Mg₂NiH₄ exhibit thermodynamically unstable with respect to phase segregation, which explains well the experimental results that these doped materials are multiphase systems. The dehydrogenation reaction of Al-doped Mg₂NiH₄ is energetically favorable to perform from a metastable hydrogenated state to a multiphase dehydrogenated state composed of Mg₂Ni and Mg₃AlNi₂ as well as NiAl intermetallics. Further analysis of density of states (DOS) suggests the improving of dehydrogenation properties of Al-doped Mg₂NiH₄ can be attributed to the weakened Mg-Ni and Ni-H interactions and the decreasing bonding electrons number below Fermi level. The mechanistic understanding gained from this study can be applied to the selection and optimization of dopants for designing better hydrogen storage materials.     

Dual-tuning effect of In on the thermodynamic and kinetic properties of Mg2Ni dehydrogenation

Mg₂In_0.1Ni solid solution with an Mg₂Ni-type structure has been synthesized and its hydrogen storage properties have been investigated. The results showed that the introduction of In into Mg₂Ni not only significantly improved the dehydrogenation kinetics but also greatly lowered the thermodynamic stability. The dehydrogenation activation energy (E_a) and enthalpy change (ΔH) decreased from 80 kJ/mol and 64.5 kJ/mol H₂ to 28.9 kJ/mol and 38.4 kJ/mol H₂, respectively. The obtained results point to a method for improving not only the thermodynamic but also the kinetic properties of hydrogen storage materials.     

The influence of Cu substitution on the hydrogen sorption properties of magnesium rich Mg-Ni films

This paper describes the hydrogen storage properties of Magnesium rich ternary Mg-Ni-Cu films of 1.5 μm thickness using binary Mg-Ni and Mg-Cu as baselines, and aims to elucidate the precise influences of alloying element Cu on the hydrogen sorption kinetics, thermodynamics and cycleability. Mg-rich Mg-Ni-(Cu) alloys show two stages during absorption. The first stage due to the absorption of Mg not alloyed in the form of Mg₂Ni and Mg₂Cu, hereafter denoted as free-Mg, is very quick, but the second one due to the absorption of intermetallic Mg₂Ni and/or Mg₂Cu is significantly slower. This sequence is confirmed by XRD characterizations at different absorption stages. The rapid first stage absorption is mainly catalyzed by the intermetallic phase, Mg₂Ni. Cu substitution improves the desorption kinetics, but severely decreases the kinetics of the second absorption stage. Failure to completely absorb Mg₂Cu to MgH₂ and MgCu₂ in consecutive absorption cycles leads to complete loss of desorption-ability in binary Mg-15 at.%Cu. XRD combined with TEM shows that segregation of Mg₂Cu towards the grain boundaries is responsible for this. Pressure-Composition Isotherms are used to examine the thermodynamic properties of the alloys. The thermodynamic properties of the Low-Temperature (LT-) Mg₂NiH₄ are determined for the first time experimentally, and are found to be ΔH = −78.6 kJ/mol H₂ and ΔS = −147.83 J/K-mol H₂. It is found that the Cu substitution has no influence on the plateau pressure of MgH₂ from free-Mg phase, but slightly increases the plateau pressure of LT-Mg₂NiH₄.     

Effect of in-situ formed Mg2Ni/Mg2NiH4 compounds on hydrogen storage performance of MgH2

Magnesium-based hydrogen storage materials (MgH₂) are promising hydrogen carrier due to the high gravimetric hydrogen density; however, the undesirable thermodynamic stability and slow kinetics restrict its utilization. In this work, we assist the de/hydrogenation of MgH₂ via in situ formed additives from the conversion of an MgNi₂ alloy upon de/hydrogenation. The MgH₂–16.7 wt%MgNi₂ composite was synthesized by ball milling of Mg powder and MgNi₂ alloy followed by a hydrogen combustion synthesis method, where most of the Mg converted to MgH₂, and the others reacted with the MgNi₂ generating Mg₂NiH₄, which produced in situ Mg₂Ni during dehydrogenation. Results showed that the Mg₂Ni and Mg₂NiH₄ could induce hydrogen absorption and desorption of the MgH₂, that it absorbed 2.5 wt% H₂ at 473 K, much higher than that of pure Mg, and the dehydrogenation capacity increased by 2.6 wt% at 573 K. Besides, the initial dehydrogenation temperature of the composite under the promotion of Mg₂NiH₄ decreased greatly by 100 K, whereas it is 623 K for MgH₂. Furthermore, benefiting from the catalyst effect of Mg₂NiH₄ during dehydrogenation, the apparent activation energy of the composite reduced to 73.2 kJ mol⁻¹ H₂ from 129.5 kJ mol⁻¹ H₂.     

Substitution of nickel in Mg2Ni and its hydride with elements from groups XIII and XIV: An ab initio study

We have performed ab initio calculations with equilibrium supercells of the Mg₂Ni compound and its hydride Mg₂NiH₄ doped with elements X = Al, Ga, In, Si, Ge and Sn. Two concentrations of X in both structures have been set: (1) every 16th, and (2) every fourth Ni atom has been substituted by X. Total energy calculations yielded the Mg₂NiH₄ hydrogen absorption enthalpy ΔH_abs according to the chemical reaction Mg₂Ni + 2H₂ → Mg₂NiH₄. Reduction of the hydrogen absorption enthalpy was reported for both concentrations of X. When doping the Mg₂NiH₄ hydride with X = In in a low concentration (1), the value of hydrogen desorption enthalpy decreases from 68.22 to 55.96 kJ(mol H₂)^?1. Doping with X = In in a high concentration (2) further decreases the hydrogen desorption enthalpy to 5.50 kJ(mol H₂)^?1. Further, the electronic structure of Mg₂(Ni–In)H₄ hydride with a low In concentration indicates weaker Ni–H bonds in comparison with the pristine Mg₂NiH₄. Attraction between H and In atoms induced enhanced bonding between Mg and H atoms compared to the pristine Mg₂NiH₄.     

First-principles studies of the structures and properties of Al- and Ag-substituted Mg2Ni alloys and their hydrides

The structures and properties of hydrogen storage alloy Mg₂Ni, of aluminum and silver substituted alloys Mg_2−xM_xNi (M = Al and Ag, x = 0.16667), and of their hydrides Mg₂NiH₄, Mg_2−xM_xNiH₄ (M = Al and Ag, x = 0.125) have been calculated from first-principles. Results show that the primitive cell sizes of the intermetallic alloys and hydrides were reduced by substitution of Mg with Al or Ag. Also, the interaction of Ni–Ni was weakened by the substitution. A strong covalent interaction between H and Ni atoms forms tetrahedral NiH₄ units in Mg₂NiH₄. The NiH₄ unit near the Al/Ag atom became tripod-like NiH₃ in Mg_2−xM_xNiH₄ (M = Al, Ag), indicating that the hydrogen storage capacity was decreased by the substitution. The calculated enthalpies of hydrogenation for Mg₂Ni, Mg_2−xAl_xNi and Mg_2−xAg_xNi are −65.14, −51.56 and −53.63 kJ/mol H₂, respectively, implying that the substitution destabilizes the hydrides. Therefore, the substitution is an effective technique for improving the thermodynamic behavior of hydrogenation/dehydrogenation in magnesium-based hydrogen storage materials.     

Microstructural evolution and hydrogen storage proprieties of melt-spun eutectic Mg76.87Ni12.78Y10.35 alloy with low hydrides formation/decomposition enthalpy

Ternary eutectic Mg_76.87Ni_12.78Y_10.35 (at. %) ribbons with mixed amorphous and nanocrystalline phases were prepared by melt spinning. The microstructures of the melt-spun, hydrogenated and dehydrogenated samples were examined and compared by X-ray diffraction and transmission electron microscopy. The amorphous structure transforms into a thermally stable nanocrystalline structure with a grain size of about 5 nm during hydrogen ab/desorption cycles. The Mg, Mg₂Ni and phases with Y in the melt-spun state transform into MgH₂, Mg₂NiH₄, Mg₂NiH_0.3, YH₂ and YH₃ after hydrogenation, and transform back to Mg, Mg₂Ni and YH₂ upon subsequent dehydrogenation. The reaction enthalpy (ΔH) and entropy (ΔS) of the higher plateau pressure corresponding to Mg₂Ni hydride formation are −53.25 kJ mol⁻¹ and −107.74 J K⁻¹ mol⁻¹, respectively. The amorphous/nanocrystalline structure effectively reduces the enthalpy and entropy of Mg₂Ni hydride formation, but has little effect on Mg. The activation energy for dehydrogenation of the hydrogenated ribbons is 69 kJ mol⁻¹. This suggests that Mg–Ni–Y with ternary eutectic composition can form an amorphous/nanocrystalline structure by melt spinning, and this nanostructure efficiently improves the thermodynamics and kinetics for hydrogen storage.     

Hydrogen storage measurements in novel Mg-based nanostructured alloys produced via rapid solidification and devitrification

Nanostructured materials for hydrogen storage with a composition of Mg₈₅Ni_15−xM_x (M = Y or La, x = 0 or 5) are formed by devitrification of amorphous and amorphous-nanocrystalline precursors produced by melt-spinning. All three compositions exhibit a maximum storage capacity of about 5 mass % H at 573 K. When ball-milled for 30 min in hexanes, the binary alloy can be activated (first-cycle hydrogen absorption) at 473 K. DSC experiments indicate that desorption in this sample begins at 525 K, compared to 560 K when the material is activated at 573 K; which indicates an improvement in the hydride reaction thermodynamics due to capillarity effects. Additions of Y and La improve the degradation in storage capacity observed during cycling of the binary alloy by slowing microstructural coarsening. Alloying with La also shows a decrease of about 8 kJ/mol and 5 kJ/mol in the enthalpy of reaction for MgH₂ and Mg₂NiH₄ formation, respectively, compared to the binary alloy; resulting in some desorption of H₂ at 473 K. The improved thermodynamics are discussed in terms of destabilization of the hydrides relative to new equilibrium phases introduced by alloying additions. The proposed hydriding reaction for the La-containing material is in agreement with previously reported experimental results.     

Effect of Ni/tubular g-C3N4 on hydrogen storage properties of MgH2

Additive doping is one of the effective methods to overcome the shortcomings of MgH₂ on the aspect of relatively high operating temperatures and slow desorption kinetics. In this paper, hollow g-C₃N₄ (TCN) tubes with a diameter of 2 μm are synthesized through the hydrothermal and high-temperature pyrolysis methods, and then nickel is chemically reduced onto TCN to form Ni/TCN composite at 278 K. Ni/TCN is then introduced into the MgH₂/Mg system by means of hydriding combustion and ball milling. The MgH₂–Ni/TCN composite starts to release hydrogen at 535 K, which is 116 K lower than the as-milled MgH₂ (651 K). The MgH₂–Ni/TCN composite absorbs 5.24 wt% H₂ within 3500 s at 423 K, and takes up 3.56 wt% H₂ within 3500 s, even at a temperature as low as 373 K. The apparent activation energy (E_a) of the MgH₂ decreases from 161.1 to 82.6 kJ/mol by the addition of Ni/TCN. Moreover, the MgH₂–Ni/TCN sample shows excellent cycle stability, with a dehydrogenation capacity retention rate of 98.0% after 10 cycles. The carbon material enhances sorption kinetics by dispersing and stabilizating MgH₂. Otherwise, the phase transformation between Mg₂NiH₄ and Mg₂NiH_0.3 accelerates the re/dehydrogenation reaction of the composite.     

Effects of trimesic acid-Ni based metal organic framework on the hydrogen sorption performances of MgH2

A metal-organic framework based on Ni (II) as metal ion and trimasic acid (TMA) as organic linker was synthesized and introduced into MgH₂ to prepare a Mg-(TMA-Ni MOF)-H composite through ball-milling. The microstructures, phase changes and hydrogen storage behaviors of the composite were systematically studied. It can be found that Ni ion in TMA-Ni MOF is attracted by Mg to form nano-sized Mg₂Ni/Mg₂NiH₄ after de/rehydrogenation. The hydriding and dehydriding enthalpies of the Mg-MOF-H composite are evaluated to be −74.3 and 78.7 kJ mol⁻¹ H₂, respectively, which means that the thermodynamics of Mg remains unchanged. The absorption kinetics of the Mg-MOF-H composite is improved by showing an activation energy of 51.2 kJ mol⁻¹ H₂. The onset desorption temperature of the composite is 167.8 K lower than that of the pure MgH₂ at the heating rate of 10 K/min. Such a significant enhancement on the sorption kinetic properties of the composite is attributed to the catalytic effects of the nanoscale Mg₂Ni/Mg₂NiH₄ derived from TMA-Ni MOF by providing gateways for hydrogen diffusion during re/dehydrogenation processes.     

Comparative investigation on the hydrogenation/dehydrogenation characteristics and hydrogen storage properties of Mg3Ag and Mg3Y

The hydrogenation/dehydrogenation characteristics and hydrogen storage properties of nominal Mg₃Ag and Mg₃Y alloys prepared by induction melting were investigated. The as-melted Mg₃Ag alloy was composed of Mg₅₄Ag₁₇ phase, while Mg₃Y consisted of Mg₂₄Y₅ and Mg₂Y phases. Mg₅₄Ag₁₇ transformed into MgAg and MgH₂ during the first hydrogenation, and the phase transition of the following hy/dehydrogenation cycles was Mg₃Ag + 2H₂ ↔ MgAg + 2MgH₂. Both Mg₂₄Y₅ and Mg₂Y undertook disproportion reactions and decomposed into MgH₂ and YH₃. Experimental and calculated results demonstrated that there was no necessary relation between the thermodynamic stabilities and the size interstices in these alloys. The dehydrogenation enthalpy change (ΔH) and entropy change (ΔS) of Mg₃Ag were calculated and compared with that of pure Mg, which indicated that the increase of ΔS could counteract the stabilization effect of ΔH, which offered a method for tuning the thermodynamic properties of Mg-based alloys.     

Catalysis derived from flower-like Ni MOF towards the hydrogen storage performance of magnesium hydride

Herein, a novel flower-like Ni MOF with good thermostability is introduced into MgH₂ for the first time, and which demonstrates excellent catalytic activity on improving hydrogen storage performance of MgH₂. The peak dehydrogenation temperature of MgH₂-5 wt.% Ni MOF is 78 °C lower than that of pure MgH₂. Besides, MgH₂-5 wt.% Ni MOF shows faster de/hydrogenation kinetics, releasing 6.4 wt% hydrogen at 300 °C within 600 s and restoring about 5.7 wt% hydrogen at 150 °C after dehydrogenation. The apparent activation energy for de/hydrogenation reactions are calculated to be 107.8 and 42.8 kJ/mol H₂ respectively, which are much lower than that of MgH₂ doped with other MOFs. In addition, the catalytic mechanism of flower-like Ni MOF is investigated in depth, through XRD, XPS and TEM methods. The high catalytic activity of flower-like Ni MOF can be attributed to the combining effect of in-situ generated Mg₂Ni/Mg₂NiH₄, MgO nanoparticles, amorphous C and remaining layered Ni MOF. This research extends the knowledge of elaborating efficient catalysts via MOFs in hydrogen storage materials.     

Dual-tuning of de/hydrogenation kinetic properties of Mg-based hydrogen storage alloy by building a Ni-/Co-multi-platform collaborative system

The Mg-based hydrogen storage alloy with multiple platforms is successfully prepared by ball milling Co powder and Mg-RE-Ni precursor alloy, and its hydrogen storage behavior was investigated in detail by XRD, EDS, TEM, PCI, and DSC methods. The ball-milled alloy consists of the main phase Mg, the catalytic phases Mg₂Ni, Mg₂Co as well as a small amount of Mg₁₂Ce, and convert into the MgH₂–CeH_2.73-Mg₂NiH₄–Mg₂CoH₅ composite after hydrogenation. The composite has three PCI platforms corresponding to the reversible de/hydrogenation reaction of Mg/MgH₂, Mg₂Ni/Mg₂NiH₄ and Mg₆Co₂H₁₁/Mg₂CoH₅. Among them, the transformation between Mg₂Ni and Mg₂NiH₄ triggers the “spill-over” effect which promote the decomposition of MgH₂ phases and enhances the hydrogen desorption kinetics. Meanwhile, the conversion of the Mg₆Co₂H₁₁ to Mg₂CoH₅ phase induces the “chain reaction” effect, which leads to preferential nucleation of Mg phase and improves the hydrogen absorption kinetics. Therefore, the Mg-RE-Ni-Co alloy has a double improvement on hydrogen absorption and desorption kinetics. Concretely, the alloy has an optimal hydrogen absorption temperature of 200 °C, at which it can absorb 5.5 wt. % H₂ within 40 s. Under the conditions, the capacity of absorption almost reaches the maximum reversible value (about 5.6 wt. %). Besides, the alloy has a dehydrogenation activation energy of 67.9 kJ/mol and can desorb 5.0 wt. % H₂ within 60 min at the temperature of 260 °C.     

Hydrogen desorption performance of high-energy ball milled Mg2NiH4 catalyzed by multi-walled carbon nanotubes coupling with TiF3

The Mg₂NiH₄ complex hydrides were synthesized by high-energy ball milling (HEBM) MgH₂ + Ni mixtures. Multi-walled carbon nanotubes (MWCNTs) or TiF₃ as catalysts were added and the catalytic-dehydrogenation behaviors were investigated. All prepared samples are characterized by X-ray diffraction (XRD) spectroscopy, scanning electron microscope (SEM) and differential scanning calorimetry (DSC) to acquire information of microstructure, phase compositions, surface and dehydrogenation properties. The results indicate that the method of adding catalysts by HEBM is reasonable and the hydrogen desorption property of Mg₂NiH₄ is improved by catalysts. It is worth noting that the dehydrogenation temperature (T_D) and the activation energy (E_a) of Mg₂NiH₄ catalyzed by MWCNTs coupling with TiF₃ are reduced to 230 °C (243.6 °C of Mg₂NiH₄) and 53.24 kJ/mol (90.13 kJ/mol of Mg₂NiH₄), respectively. The addition of proper catalysts is proved to be an effective strategy to decrease T_D and E_a of Mg₂NiH₄ hydrides.     

Structure and hydrogen storage properties of Mg2Cu1−xNix (x = 0–1) alloys

The effect of Ni-substitution on the structure and hydrogen storage properties of Mg₂Cu_1−xNi_x (x = 0, 0.2, 0.4, 0.6, 0.8, 1) alloys prepared by a method combining electric resistance melting with isothermal evaporation casting process (IECP) has been studied. The X-ray single-crystal diffraction analysis results showed that the cell volume decreases with increasing Ni concentration, and crystal structure transforms Mg₂Cu with face-centered orthorhombic into Ni-containing alloys with hexagonal structure. The Ni-substitution effects on the hydriding reaction indicated that absorption kinetics and hydrogen storage capacity increase in proportion to the concentration of the substitutional Ni. The activated Mg₂Cu and Mg₂Ni alloys absorbed 2.54 and 3.58 wt% H, respectively, at 573 K under 50 bar H₂. After a combined high temperature and pressure activation cycle, the charged samples were composed of MgH₂, MgCu₂ and Mg₂NiH₄ while the discharged samples contained ternary alloys of Mg–Cu–Ni system with the helpful effect of rising the desorption plateau pressures compared with binary Mg–Cu and Mg–Ni alloys. With increasing nickel content, the effect of Ni is actually effective in MgH₂ and Mg₂NiH₄ destabilization, leading to a decrease of the desorption temperature of these two phases.     

Hydrogen storage properties of Mg-23.5Ni-xCu prepared by rapid solidification process and crystallization heat treatment

A Mg-23.5wt%Ni-5wt%Cu alloy was synthesized by the gravity casting method in a large quantity (7.5 kg). From this alloy, Mg-23.5wt%Ni-xwt%Cu (x = 2.5, 5 and 7.5) samples for hydrogen storage were prepared by melt spinning and crystallization heat treatment. The samples were ground under H₂ in order to obtain a fine powder. These alloys contained crystalline Mg and Mg₂Ni phases. The Mg-23.5Ni-2.5Cu alloy had the highest hydriding and dehydriding rates after activation among these alloys. The dehydriding curve under 1.0 bar H₂ at 573 K exhibits two stages; the dehydriding rate is high for about 2.5 min (the decomposition of Mg₂Ni hydride and Mg hydride in small particles), and then it becomes lower (the decomposition of Mg hydride).     

Catalytic effect of Ni, Mg2Ni and Mg2NiH4 upon hydrogen desorption from MgH2

MgH₂ is a perspective hydrogen storage material whose main advantage is a relatively high hydrogen storage capacity (theoretically, 7.6 wt.% H₂). This compound, however, shows poor hydrogen desorption kinetics. Much effort was devoted in the past to finding possible ways of enhancing hydrogen desorption rate from MgH₂, which would bring this material closer to technical applications. One possible way is catalysis of hydrogen desorption. This paper investigates separate catalytic effects of Ni, Mg₂Ni and Mg₂NiH₄ on the hydrogen desorption characteristics of MgH₂. It was observed that the catalytic efficiency of Mg₂NiH₄ was considerably higher than that of pure Ni and non-hydrated intermetallic Mg₂Ni. The Mg₂NiH₄ phase has two low-temperature modifications below 508 K: un-twinned phase LT1 and micro-twinned phase LT2. LT1 was observed to have significantly higher catalytic efficiency than LT2.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

Mechanisms of hydrides’ nucleation and the effect of hydrogen pressure induced driving force on de-/hydrogenation kinetics of Mg-based nanocrystalline alloys

Aiming to gain insight on the hydrogen storage properties of Mg-based alloys, partial hydrogenation and hydrogen pressure related de-/hydrogenation kinetics of Mg–Ni–La alloys have been investigated. The results indicate that the phase boundaries, such as Mg/Mg₂Ni and Mg/Mg₁₇La₂, distributed within the eutectics can act as preferential nucleation sites for β-MgH₂ and apparently promote the hydrogenation process. For bulk alloy, it is observed that the hydrogenation region gradually grows from the fine Mg–Ni–La eutectic to primary Mg region with the extension of reaction time. After high-energy ball milling, the nanocrystalline powders with crystallite size of 12～20 nm exhibit ameliorated hydrogen absorption/desorption performance, which can absorb 2.58 wt% H₂ at 368 K within 50 min and begin to desorb hydrogen from ～508 K. On the other side, variation of hydrogen pressure induced driving force significantly affects the reaction kinetics. As the hydrogenation/dehydrogenation driving forces increase, the hydrogen absorption/desorption kinetics is markedly accelerated. The dehydrogenation mechanisms have also been revealed by fitting different theoretical kinetics models, which demonstrate that the rate-limiting steps change obviously with the variation of driving forces.